Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Charging Regulator Victron Blue Solar MPPT 15A - 12V / 24V
Price without VAT
Available on backorder
Dimensions: 100 * 113 * 47 mm
Weight: 0,4Kg
Max battery current: 15Ah
Battery voltage: 12 / 24V
Max PV open circuit voltage: 100V
Max PV power (12V) 200W (MPPT range 15V to 100V)
Max PV power (24V) 400W (MPPT range 30V to 100V)
Extremely fast Maximum Power Point Tracking (MPPT)
Especially in the case of it was cloudy of heaven, when the volume light changes constantly, an extremely fast controller MPPT will improve energy harvest up to 30% compare to Charge Controllers PWM and until 10% compare to slower auditors MPPT.
Price without VAT
Weight | 1 kg |
---|---|
Brand |
Victron SmartSolar MPPT 150/85-MC4 - MPPT Photovoltaic Charging Regulator 85A
Victron charge controller, which has built-in Bluetooth for wireless and easy connection as well as a socket so you can insert-connect display and configuration screen. Even in cases of increased cloud cover where the light radiation changes constantly, with the Victron SmartSolar MPPT 150/85 MC4 Charging Controller ito improve energy harvest until 30% compare to common Charge Controllers PWM and until 10% compare to slower regulators MPPT. In addition to the system BatteryLife - an intelligent battery management system and with electronic components protected by resin, we have a complete solution for environmental protection.
Specifications
BlueSolar charge controller | MPPT 150/45 | MPPT 150/60 | MPPT 150/70 | MPPT 150/85 | MPPT 150/100 |
battery voltage | 12/24/48 V Auto Select | ||||
Rated charging current | 45A | 60A | 70A | 85A | 100A |
Maximum PV power |
12V: 650W / 24V: 1300W / 48V: 2600W |
12V: 860W / 24V: 1720W / 48V: 3440W |
12V: 1000W / 24V: 2000W / 48V: 4000W |
12V: 1200W / 24V: 2400W 48V: 4800 W |
12V: 1450W / 24V: 2900W / 48V: 5800W |
Maximum PV open circuit voltage |
150V absolute maximum coldest conditions |
||||
Maximum efficiency | 98% | ||||
Self-consumption | 10 mA | ||||
Charge voltage 'absorption' | Default setting: 14,4 / 28,8 / 43,2 / 57,6 V | ||||
Charge voltage 'float' | Default setting: 13,8 / 27,6 / 41,4 / 55,2 V | ||||
Charge algorithm | multi-stage adaptive | ||||
Temperature compensation | -16 mV / ° C resp. -32 mV / ° C | ||||
Data communication port and remote on-off |
VE.Direct | ||||
Operating temperature | -30 ° C à 60 ° C (full rated output up to 40 ° C) | ||||
Humidity (non-condensing) | Max. 95% |
Available on backorder
Charging regulator Mppt 2210A 20A 520 watt MAX PV panel 24V with digital display (control screen) Features: • Advanced MPPT technology • High tracking efficiency no less than 99.5% • Peak conversion efficiency of 98% • Ultra-fast tracking speed • Accurately recognizing and tracking of multiple power point • Multi-function LCD displays system information intuitively • User programmable for battery types, load control etc. • 3-Stage charge with PWM output • Common positive grounding design • RS485 port with industrial standard MODBUS open architecture • Fully programmable function via PC software or remote meter
Price without VAT
Out of stock
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
BlueSolar Charge controller | MPPT 100/50 |
Battery Voltage | 12 / 24V auto select |
Rated charging current | A 50 |
Nominal PV Power, 12 V 1a), 1b) | 700 W (MPPT range 15 V to 70 V resp. 95 V) |
Nominal PV Power, 24 V 1a), 1b) | 1400 W (MPPT Bereich 30 V to 70 V bzw. 95V) |
Maximum PV open circuit voltage | 100 V |
Peak efficiency | 98% |
Self-consumption | 10 mA |
Charge voltage 'absorption' | 14,4 V / 28,8 V (adjustable) |
Charge voltage 'float' | 13,8 V / 27,6 V (adjustable) |
Charge algorithm | multi-stage adaptive |
Temperature compensation | -16 mV / ° C resp. -32 mV / ° C |
Protection | Battery reverse polarity (fuse) / Output short circuit / Over temperature |
Operating temperature | -30 ° C to +60 ° C (full rated output up to 40 ° C) |
Humidity | 95% non-condensing |
Data Communication Port | VE.Direct |
Available on backorder
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type | MPPT |
Power (W) | 145 (12V) / 290 (24V) |
Manufacturer | VictronEnergy |
Input voltage (V) | 75 |
Output Voltage (V) | 12/24 |
IP Protection | IP43 (electronic components), IP22 (connection area) |
Weight (kg) | 0.5 |
Warranty (years) | 5 years |
Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
Hybrid controller SAC SSWC-06-1224 with Digital Display
PMW technology,
Reinforced circuit.
12V / 24V operation. Automatic Identification System.
Price without VAT
Out of stock
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Charging regulator waterproof / waterproof LS1024BP 10A PWM with aluminum body IP67. Suitable for outdoor use or operation facing the sea. Ideal for outdoor garden lights, light columns, yachts, caravans, caravans
Price without VAT
In stock
10A, programmable charge regulator with night mode.
Technical data - programming
QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
Price without VAT
Out of stock
Cotek CX1250 Battery Charger - 12V - 50A - 230VAC
Price without VAT
In stock
10A Dual Battery PWM charge regulator for 2 batteries.
Feature:
· Two battery charging eliminates the extra cost of two separate solar charging systems
· Intelligent System Optimum Control
· 12 / 24V auto work
· Battery type selection
· Charging frequency optional
· High efficient Series PWM charging
· Local external temperature compensation
· Remote temperature sensor optional
· Use MOSFET as electronic switch, without any mechanical switch
· Remote meter MT-1 optional
· Electronic protection: over charging, short circuit, battery reverse polarity protection
Specification:
Electrical parameters | |
System voltage | 12 / 24VDC Auto work |
Nominal battery current | 10A |
Charge circuit voltage drop | .0.26V |
Discharge circuit voltage drop | .0.15V |
Self consumption | ≤ 6mA |
Working temperature | -35 ℃ to + 55 ℃ |
Humidity | 10% -90% NC |
Enclosure | IP30 |
Port | 4mm2 |
Net weight | 0.15KG |
Price without VAT
Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.
Specifications :
Available on backorder
LS2024EU 20A PWM charge controller with USB
Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
Charging regulator LS0512EU 5A PWM with USB output
Specifications:
Ο charge regulator LS0512EU 5A provides efficient charging by applying the new PWM technology, increasing battery life and improving the performance of a system's photovoltaic panels; of the load output · Provides compensation of the temperature of the batteries ensuring proper charging and discharging of the parameters automatically
It has Electronic protection:
· Load overload protection · Short circuit protection · Battery protection against overcharging · Reverse battery polarity protection
Price without VAT
Out of stock
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Waterproof / watertight charge regulator IP 67 LS1024EPD 10A PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.
Price without VAT
Out of stock
Use in small autonomous and large photovoltaic installations. The charge regulator for photovoltaics CX20-48 has an LCD graphic display, which displays the charge status of the battery and the charge, as well as the operation of the photovoltaics.
Price without VAT
In stock
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
Available on backorder
Set of 12 pieces (24V) Batteries 7 OPzS 700 2V
811AH - 1153AH in C10 hour and C120 hour charge cycle, 2V deep discharge batteries
OPzS - Solar series
Unique Reliability and Lifespan
OPzS - Solar permanent accumulators are TUBE low maintenance type, specially designed for
Charging - discharging cycles of high autonomy and safety.
Special prices for more than 10 pieces
The price does not include VAT + shipping
In stock
Goodwe GW25K-MT 220V network inverter for interconnected net metering systems
Available on backorder
Minimum order 2 pieces. Delivery 4-6 days from France
The 2v batteries RES 6-SOPzS 965AH / C120 Sunlight, Greek-made deep discharge company are an economical and reliable solution for energy storage in small and medium autonomous PV systems. The maximum service life according to the manufacturer's specifications is 15 years (Design Life under Float Conditions)
SOPzS batteries are deep discharge with cylindrical lead plates and with 2500 life cycles at 50% discharge (DOD).
They are made of translucent durable housing, for easy monitoring of the liquid level and quite resistant to repeated loading-unloading.
Capacity:
969Ah / C120
Dimensions: 198mm x 137mm x 613mm (Height 640 mm with poles)
Price without VAT.
In stock
EPSOLAR XTRA1210N XDS2 CHARGE REGULATOR 10A/24V
Epsolar charger suitable for installations up to 10A at 24V.
Available on backorder
917AH C10 until 1220AH C120, 2V type deep discharge batteries PZS Solar TUBE low maintenance type, specially designed for use in charge - discharge cycles
Price without VAT
In stock
Victron Energy MultiPlus-II 48/5000 / 70-50 Pure Sine Inverter. A MultiPlus, with ESS or Power Storage System functionality
Available on backorder
VICTRON 12-330 LiFePO4 battery - Lithium technology - 12.8V 330Ah with 5000 cycles at 50%, suitable for marine applications, photovoltaics, UPS, Stand by, emergency power supply, electric motors, caravans and boats
Available on backorder
With the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Available on backorder
Out of stock
Not a member? Create an account
Already got an account? sign in here