Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
USB Converter Victron Interface IVI VIC MK2-USB
Price without VAT
Out of stock
An information control and management system for all QUATROs to communicate effectively with their tuning via the USB communication port.
Price without VAT
Weight | 1 kg |
---|---|
Brand |
Battery monitoring system with 500A shunt and connection kit. With the possibility of monitoring and a second battery.
Price without VAT
Available on backorder
Your device provides clear and simple information for controlling your systems.
Price without VAT
Available on backorder
Interface device with Data logger and Ethernet remote control system.
Price without VAT
Available on backorder
Battery 'fuel gauge', time-to-go indicator, and much more The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.
Next to the basic display options, such as voltage, current and ampere-hours consumed, the battery monitor BMV-700 series
battery monitor BMV-700 series
Available on backorder
Victron Skylla-i remote on-off cable
Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged.
This cable is intended for on / off control of the Skylla-i when the source is high when the Skylla-i must be on, and low or free floating when the Skylla-i must be off.
Specifications:
Maximum input voltage: 70V
Minimum input voltage needed for switching on: Approx. 6V
Switch off level: Input voltage must be less than 1V or must be free floating
In stock
Charging regulator cable Communication cable CC-USB-TTL-150U for charge regulators, EPsolar LS-BP, LS-BPL, TRACER-BP, TRACER-BPL, DCCP-DP Solar Controller
Price without VAT
In stock
With the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Available on backorder
Heat sensor for the BlueSolar PWM-Pro.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
Price without VAT
Available on backorder
Terminal for connecting two female photovoltaic panel plugs to one Female
Price without VAT
In stock
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. So, theavailability of the lighting will increase even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct Connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED drivers.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older version can be updated for this
Price without VAT
In stock
Female MC4 (Male) with type Y cable branching to 2 MC4 Males.
Price without VAT
Out of stock
Male MC4 (Male) with type Y cable branching and discharge in 2 MC4 Female.
Out of stock
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type | MPPT |
Power (W) | 145 (12V) / 290 (24V) |
Manufacturer | VictronEnergy |
Input voltage (V) | 75 |
Output Voltage (V) | 12/24 |
IP Protection | IP43 (electronic components), IP22 (connection area) |
Weight (kg) | 0.5 |
Warranty (years) | 5 years |
Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
This VE.Direct M8 Cable BNC male – BNC female can be used to extend the cables between a Smart Battery Lithium and the BMS.
Available on backorder
This cable for Smart BMS CL 12/100 connects between a non-VE.Bus BMS) and a MultiPlus ( MultiPlus, MultiPlus Compact or MultiPlus-II).
Available on backorder
With this cable, the charge control function of the BMS 12/200 can be used together with the VE.Bus BMS.
Available on backorder
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Out of stock
ECO MPPT ES 150V / 40A charge regulator with the possibility of increasing the efficiency up to 30%
Charging regulators ECO MPPT ES 150 / 40A for autonomous photovoltaic systems have a smart algorithm for detecting the maximum power point of the photovoltaic depending on the sunshine and the temperature, thus maximizing the efficiency of the system up to 30%. Suitable for all types of polycrystalline and monocrystalline silicon panels.
They are real MPPT charging regulators with 150V open circuit input voltage at 40A and not false MPPT-PWM low voltage
They have a digital operating screen and a built-in datalogger
Circuit protections:
· Short circuit protection on the photovoltaic side.
· Discharge protection.
· Overload protection.
· Overload protection.
· Short circuit protection in loads.
· Protection against reverse polarity of photovoltaics.
· Protection against incorrect battery polarity connection.
Character:
MPPT photovoltaic charge regulator power 600W - 12V, 1200W - 24V.
Battery voltage 12V / 24V - 40A, photovoltaic voltage 150V, choice of night mode.
Maximum charging current: 40 A.
System voltage: 12/24 V
Price without VAT
Out of stock
MC4 Female MC4 Solar Connector Female for secure data protection.
Price without VAT
Wind turbine 1000 watt - 1100 watt 24v with maximum power / 1500 watt * max / 24v high quality aluminum and Marine type durability for use near the sea.
Price without VAT
Out of stock
5 PzS 700PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 700Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage | 2 | |
Capacity (C5) | 700 [AH] | |
Length | 198 [mm] | |
Width | 101 [mm] | |
Height | 688 [mm] | |
Weight | 39.300 [kg] | |
Ind | NO |
Applications
In stock
Provides immediacy and ease of adjustment, suitable for small home autonomous photovoltaic systems up to 160 watts / 12v
Increases battery life and installation performance.
Voltage: 12V
Rated Current: 10A
Maximum battery voltage: 16V
Maximum open circuit voltage of PV panel 30V
Price without VAT
Out of stock
5000W mains converter
Special prices for the purchase of more than 3 pieces
With the Sunny Boy Multi-String Converters you can implement photovoltaic installations in the Middle and Upper Power Range with maximum efficiency.
Price without VAT
Available on backorder
WIND GENERATOR ECO Obm 500final match. WATT MAX
The wind turbine ECO Obm 500 with a maximum power of 550W is a very reliable solution able to ensure you a low bill from the electricity provider or autonomy in cases where the electricity grid is not available. The wind turbine with high quality construction materials and state-of-the-art technologies ECO Obm 500 It can generate electricity even in low wind levels while the 20-month warranty that accompanies it ensures its long-term operation without problems and unwanted interruptions.
General characteristics
State-of-the-art materials for reliable and high quality energy production.
Body made of high quality aluminum lining.
Long service life.
High quality materials.
Tested in extreme weather conditions.
Silent mode.
Low construction weight.
Easy installation and operating instructions.
Out of stock
Wind turbine 450 watt / 12v (16m / sec) or 350 watt / 12v (11m / sec) German Technology, low noise, low start 1.8 M / S and high efficiency.
Includes cotroller.
Price without VAT
Out of stock
Net-metering & Autonomous 10kw with lithium battery – Consists of
24 PV panels 410 watts / Mono half cells SKU: 11550 x 2 sets V-TAC
Three Phase Hybrid On/Off-Grid Inverter 10KW with LCD Display IP65 V-TAC SKU: 11542 V-TAC
LiFePO4 Rack 9.6KWh 48V 200Ah Lithium Battery for Solar Inverter SKU: 11523 V-TAC
Available on backorder
Not a member? Create an account
Already got an account? sign in here