Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
The Ep Solar MPPT series of charge regulators for autonomous photovoltaic systems has a smart algorithm for detecting the maximum power point of the photovoltaic depending on the sunshine and the temperature, thus maximizing the efficiency of the system by 30%. Suitable for all types of polycrystalline and monocrystalline silicon panels.
Character:
Night mode selection.
MPPT photovoltaic charge regulator power 130W - 12V, 260W - 24V.
Battery voltage 12V / 24V - 10A, 150V photovoltaic voltage, night mode option.
Maximum charging current: 10 A.
System voltage: 12/24 V
Own power consumption: <10 mA
In stock
The Ep Solar MPPT series of charge regulators for autonomous photovoltaic systems has a smart algorithm for detecting the maximum power point of the photovoltaic depending on the sunshine and the temperature, thus maximizing the efficiency of the system by 30%. Suitable for all types of polycrystalline and monocrystalline silicon panels.
Electronic protections:
· Short circuit protection on the photovoltaic side.
· Discharge protection.
· Overload protection.
· Overload protection.
· Short circuit protection in loads.
· Protection against reverse polarity of photovoltaics.
· Protection against incorrect battery polarity connection.
Character:
Night mode selection.
MPPT photovoltaic charge regulator power 130W - 12V, 260W - 24V.
Battery voltage 12V / 24V - 10A, 150V photovoltaic voltage, night mode option.
Maximum charging current: 10 A.
System voltage: 12/24 V
Own power consumption: <10 mA
Dimensions: 156 x 97 x 68 mm
Type of protection: IP 30
Weight | 0.8 kg |
---|---|
Brand |
The Ep Solar MPPT series of charge regulators for autonomous photovoltaic systems has a smart algorithm for detecting the maximum power point of the photovoltaic depending on the sunshine and the temperature, thus maximizing the efficiency of the system by 30%. Suitable for all types of polycrystalline and monocrystalline silicon panels.
Character:
MPPT photovoltaic charge regulator power 130W - 12V, 260W - 24V.
Battery voltage 12V / 24V - 10A, 100V photovoltaic voltage, night mode option.
Maximum charging current: 10 A.
System voltage: 12/24 V
Own power consumption: <10 mA
Out of stock
30A - MPPT 780 Watt 12 / 24V - Digital MPPT charge regulator of exceptional specifications of high input voltage up to 150V DC. Suitable for all types of polycrystalline and monocrystalline silicon panels with total open circuit voltage (Voc) up to 150 VOLT. Reduces losses from 20% -30% by increasing the efficiency of the autonomous photovoltaic system in relation to the simple charge regulators. Ideal controller for use in photovoltaic panels used for interconnected to its network (PPC) systems. The panels are connected in series for maximum efficiency.
Price without VAT
Out of stock
The Ep Solar MPPT series of charge regulators for autonomous photovoltaic systems has a smart algorithm for detecting the maximum power point of the photovoltaic depending on the sunshine and the temperature, thus maximizing the efficiency of the system by 30%. Suitable for all types of polycrystalline and monocrystalline silicon panels.
Available on backorder
20A - MPPT 520W 12 / 24V - Digital MPPT charge regulator of exceptional specifications of high input voltage up to 100V DC. Suitable for all types of panels.
|
|||||
|
Key features :
· MPPT technology
· Peak conversion efficiency of 97%
· High Tracking efficiency of 99%
· Several seconds tracking speed
· Very fast Sweeping of the entire IV curve
· 4- Stage charge with PWM output
· Excellent thermal design and nature air cooling
· Full power output in ambient temperatures up to 45 ℃
· Temperature compensation function
· Sealed, Gel, Flooded battery type optional
· Diversified load control: Manual, Dusk to Dawn, Dual timer, TEST
· RJ45 interface with optional remote meter
· Standard 2 years warranty
· CE certificate
|
||||||||||||||||||||||||||||||||||||||||||
Technical specifications
Electrical Parameters
Environmental parameters
Mechanical parameters
|
||||||||||||||||||||||||||||||||||||||||||
|
In stock
Use in small autonomous and large photovoltaic installations. Main Features The charge regulator for photovoltaics CX40-48 has an LCD graphic display, which displays the charge status of the battery and the charge.
Price without VAT
In stock
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Specifications
Charge Controller Type | PWM |
---|---|
System Voltage | 12V, 24V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Price without VAT
Out of stock
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type | MPPT |
Power (W) | 145 (12V) / 290 (24V) |
Manufacturer | VictronEnergy |
Input voltage (V) | 75 |
Output Voltage (V) | 12/24 |
IP Protection | IP43 (electronic components), IP22 (connection area) |
Weight (kg) | 0.5 |
Warranty (years) | 5 years |
Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
30A continuous operation and programmable charge regulator.
Price without VAT
Out of stock
20A continuous operation and max 25A charge regulator programmable for use even in lighting columns, garden lights with night operation capability.
Technical analysis
Solar charge controller for street light
Dual timer function
Battery type selection
Full electronic protection
Solar charge controller
1. Intelligent system optimum controller
2. High efficient series PWM charging with temperature compensation
3. Compact size
4. Use mosfet as electronic switch, without any mechanical switch
5. Digital LED menu, only one key solve all setting simple
6. Widely used, automatically recognize day / night
7. Intelligent timer function with 1-15 hours option
8. Unique dual timer function, enhance the flexibility of street light system.
9. Gel, sealed and flooded battery type option
10. Load status display
11. Big terminals and big distance between terminals
12. Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
13. Reverse polarity protection: Any combination of solar module and battery
14. Load work mode: Light on + dual timer, dusk to dawn, test, on / off
Model LS2024R
Rated Current 20A
System Voltage 12 / 24V auto work
Over Load Protection 1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds
Short Circuit Protection 3.5 times of rated current
Self-consumption Max. 6mA
Working Temperature -35'C to + 55'Cindustrial
Equalize Charging Voltage 14.6V; X2 / 24V
Boost Charging Voltage 14.4V; X2 / 24V
Float Charging Voltage 13.8V; X2 / 24V
Boost Reconnect Charging Voltage 13.2V; X2 / 24V
Temperature Compensation -30mV / 'C / 12V
Under Voltage Warning Voltage 12.0V; X2 / 24V
Low Voltage Disconnect Voltage 11.1V; X2 / 24V
Low Voltage Reconnect Voltage 12.6V; X2 / 24V
Terminals 10mm2
Enclosure IP30
Model | LS2024R | ||
Rated Current |
20A | ||
System Voltage |
12 / 24V auto work | ||
Over Load Protection |
1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds |
||
Short Circuit Protection |
3.5 times of rated current |
||
Self-consumption |
Max. 6mA |
||
Working Temperature |
-35 ° C to + 55 ° C industrial |
||
Equalize Charging Voltage |
14.6V; x2 / 24V | ||
Boost Charging Voltage |
14.4V; x2 / 24V | ||
Float Charging Voltage |
13.8V; x2 / 24V | ||
Boost Reconnect Charging Voltage |
13.2V; x2 / 24V | ||
Temperature Compensation |
-30mV / ° C / 12V | ||
Under Voltage Warning Voltage |
12.0V; x2 / 24V | ||
Low Voltage Disconnect Voltage |
11.1V; x2 / 24V | ||
Low Voltage Reconnect Voltage |
12.6V; x2 / 24V | ||
terminals |
10 mm 2 | ||
Price without VAT |
IP30 |
Out of stock
Cotek CX2425 Battery Charger - 24V - 25A - 230VAC
Price without VAT
In stock
10A, programmable charge regulator with night mode.
Technical data - programming
QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
Price without VAT
Out of stock
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
Charging regulator LS0512EU 5A PWM with USB output
Specifications:
Ο charge regulator LS0512EU 5A provides efficient charging by applying the new PWM technology, increasing battery life and improving the performance of a system's photovoltaic panels; of the load output · Provides compensation of the temperature of the batteries ensuring proper charging and discharging of the parameters automatically
It has Electronic protection:
· Load overload protection · Short circuit protection · Battery protection against overcharging · Reverse battery polarity protection
Price without VAT
Out of stock
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Available on backorder
Out of stock
Fronius FR PRIMO 5.0-1 network inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
20 kw (19.800wp) photovoltaic Station
20kw with Yingli 230 watt polycrystalline silicon PV panels. Photovoltaic station connected to Dei.
Provided through European Union certifications, a factory guarantee for the efficiency of the photovoltaic panels (panels) for 25 years for 80%. Shelf life of photovoltaic panels 45-50 years.
Price without VAT
Out of stock
1550Wh to 1750wh operating voltage 12 VDC Consumable energy 24 hours a day during the summer months *
Appliances: Small Fridge energy class A (+ +) (70-75watt) + Lighting 3-4 energy saving lamps + TV small energy class A (+)
For a system with an installed rated power of about 320W which operates as autonomous with 1.6KWH 24-hour output during the summer months.
Price without VAT
In stock
3.5KW-Pure Sine Hybrid Inverter 3.5kw/3500W 24V & Charge Controller 30-80A China
In stock
Solaredge SE SE10K SETAPP network inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
The highest performance ever achieved!
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. In addition, once the battery is fully charged, power consumption is automatically reduced below 0.5 Watt, a value about five to ten times lower than the industry standard, a feature that makes this charging range one of the best and most reliable on the market.
Price without VAT
Available on backorder
Charger Blue Power IP 67 fully protected: waterproof, with protection against vibration and ignition
The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.
Not a member? Create an account
Already got an account? sign in here