Solaredge SE SE25K SETAPP network inverter for photovoltaics

2,429.00 
1,939.28  Excluding VAT
2,404.71  Includes VAT

Solaredge SE SE25K SETAPP network inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.

Available on backorder

  ... people are viewing this right now

  Share

Solaredge SE SE25K SETAPP network inverter for photovoltaics

Solaredge SE SE25K SETAPP network inverter for photovoltaics: A complete solar system solution

Solaredge SE SE25K SETUP: Three-phase converter Solaredge SE SE25K SETUP 3 kW for PV systems.

The SolarEdge SE25K three-phase converter combines state-of-the-art digital control technology with efficient power conversion architecture to achieve superior solar collection and best-in-class reliability.

Constant voltage technology ensures that the solar inverter always operates at its optimum input voltage, regardless of the number of units in a series or environmental conditions. A proprietary data monitoring receiver is integrated into the inverter and collects the power optimizer performance data from each photovoltaic module. This data can be transmitted over the internet and accessed through the SolarEdge monitoring platform for performance analysis, fault detection and troubleshooting of photovoltaic systems.

PRODUCT DETAILS

solaredge-se-se25k-inverter-grid-photovoltaic, prices, specifications, purchase, cost

solaredge-se-se25k-inverter-grid-photovoltaic, prices, specifications, purchase, cost

specifications

 

Applicable to inverters With Part number

SE12.5K SE15K SE16K SE17K

SEXXK-XXXXXBXX

SE25K SE27.6K
OUTPUT
Rated AC Power Output 12500 15000 16000 17000 25000 27600 VA
Maximum AC Power Output 12500 15000 16000 17000 25000 27600 VA
AC Output Voltage - Line to Line / Line to Neutral (Nominal) 380/220; 400/230 Vac
AC Output Voltage - Line to Neutral Range 184 – 264.5 Vac
AC Frequency 50/60 ± 5 Hz
Maximum Continuous Output Current (per Phase) 20 23 25.5 26 38 40 A
Grids Supported - Three Phase 3 / N / PE (WYE with Neutral)
Utility Monitoring, Islanding Protection, Configurable Power Factor, Country Configurable Thresholds Yes
THD < 3
INPUT
Maximum DC Power (STC Module) 16850 20250 21600 22950 33750 37250 W
Transformer-less, Ungrounded Yes
Maximum Input Voltage 1000 vdc
Nominal DC Input Voltage 750 vdc
Maximum Input Current 21 22 23 23 37 40 adc
Reverse-Polarity Protection Yes
Ground-Fault Isolation Detection 700kΩ Sensitivity 350kΩ Sensitivity (1)
Maximum Inverter Efficiency 98 98.3 %
European Weighted Efficiency 97.7 97.6 97.7 97.7 98 %
Nighttime Power Consumption <2.5 <4 W
ADDITIONAL FEATURES
Supported Communication Interfaces (2) RS485, Ethernet, Wi-Fi (requires antenna) (3), ZigBee (optional), Cellular (optional)
Inverter Commissioning With the SetApp mobile application using built-in Wi-Fi access point for local connection
Smart energy management Export Limitation
Arc Fault Protection Integrated, User Configurable (According to UL1699B)
Rapid Shutdown Optional (4) (Automatic upon AC Grid Disconnect)
RS485 Surge Protection Optional (5)
DC SAFETY UNIT (OPTIONAL)
2-pole Disconnection N/A 1000V / 40A
DC Surge Protection N/A Type II, field replaceable
DC Fuses on Plus & Minus N/A Optional, 20A
Compliance N/A UTE-C15-712-1
STANDARD COMPLIANCE
Safety IEC-62103 (EN50178), IEC-62109, AS3100
Grid Connection Standards (6) VDE-AR-N-4105, G99, AS-4777, EN 50438, CEI-021, VDE 0126-1-1, CEI-016, BDEW
Emissions IEC61000-6-2, IEC61000-6-3 , IEC61000-3-11, IEC61000-3-12
RoHS Yes
INSTALLATION SPECIFICATIONS
 

AC Output Gland Diameter / Wire Cross Section

 

15-21mm / Solid wire 2.5-16 mm2

18-25mm / Solid wire

2.5-16 mm2, Stranded wire 2.5-10

mm2

DC Input 2 MC4 pairs 3 MC4 pairs
DC Input with Safety Unit N/A Gland diameter 5 - 10 mm
N/A Wire cross section 0.5 - 13.5 mm2
Dimensions (HxWxD) 540 x 315 x 260 mm
Dimensions with Safety Unit (HxWxD) N/A 775 x 315 x 260 mm
Weight 30.7 45 kg
Weight with Safety Unit N/A 48 kg
Operating Temperature Range -40 - +60 (7) .C
cooling Fan (user replaceable)
Noise <50 <55 dBA
Protection Rating IP65 - Outdoor and Indoor
mounting Provided Bracket

Solaredge Power Optimizer

Solaredge solar inverters use DC power optimization technology. This means that the power is converted to AC before it is sent to your home or business. The Solaredge Power Optimizer performs two main functions: active power filter and passive voltage control. The active power filter reduces any high frequency and harmonic noise that could compromise system performance. Passive voltage control, on the other hand, helps ensure high quality AC output by adjusting the input voltage as required. In addition, this system also has a Smart Grid Ready function, which allows you to take advantage of the latest innovations in home energy management systems.

How does saving money on your home with a Solaredge network inverter save you money?

Photovoltaic panels are a great way to generate clean energy and reduce electricity bills. They can save you money on your electricity bill by producing clean, clean energy that is not only cheaper than you pay now, but also better for the environment.

There are many other benefits to solar energy as well. You will never have a power outage because you will generate power yourself. You will also receive free, clean electricity at the end of your system life cycle and it is an investment that will pay off over time because your system will last much longer than a traditional one.

Most viewed products

Recently viewed products

  • -67%Limited
    Photovoltaic Panel V-TAC 11519 410W Monocrystalline
    410W Photovoltaic Panel V-TAC 11519 Monocrystalline half-cells 233.00 
    77.00  Excluding VAT
    95.48  Includes VAT

    Photovoltaic Panel V-TAC 11519 410W Monocrystalline half-cells

    Output 410W

    Dimensions 1722mm x 1134mm x 30mm

    Minimum purchase quantity 12 pieces

    In stock

  • -33%Limited
    CLEAN HALF INVERTER 1500Watt 24V DC-Economical 359.00 
    239.00  Excluding VAT
    296.36  Includes VAT

    Pure sine INVERTER 24V DC 1500Watt HIP-1500-24v / Economic inverter / DC-AC sine wave converter 1500W / 24V. Instantaneous load starting current 3000W. Yield> 90%. Low current of the same consumption

    Use in: Small cottages, caravans, Cars, boats, tractors, trucks, laptops, TVs, power tools, office equipment, and home appliances

    1 YEAR WARRANTY

    Price without VAT

    In stock

  • -20%Limited
    Victron Energy Battery Charger-Blue Smart IP22 Charger 12/15 (1), Bluetooth Smart, prices.reviews
    Victron Energy Battery Charger-Blue Smart IP22 Charger 12/15 (1) 144.40 
    115.45  Excluding VAT
    143.16  Includes VAT

    Victron Energy Battery Charger-Blue Smart IP22 Charger 12/15 (1). Charger with built-in Bluetooth for communication and settings from your mobile. With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications.

    Available on backorder

  • -19%Limited
    SET Photovoltaic Panel Mono 410W 15 pieces V-TAC 11552
    SET Photovoltaic Panel Mono 410W 15 pieces V-TAC 11552 1,900.00 
    1,545.00  Excluding VAT
    1,915.80  Includes VAT

    SET Photovoltaic Panel Mono 410W 15 pieces V-TAC 11552

    Output 410W

    Dimensions 1722 x 1134 x 35mm

    Minimum SET purchase quantity 

    In stock

  • Victron 12V/240Ah AGM Deep Cycle Battery (M8) 520.00 
    518.00  Excluding VAT
    642.32  Includes VAT

    Victron 12V/240Ah AGM Deep Cycle Battery (M8)

    Victron 12V/240Ah AGM Deep Cycle (M8) closed type deep discharge photovoltaic battery from Victron Energy for high starting amperes. Supplied with M8 flat copper poles and pins, which ensures the best possible connection contact and eliminates the need for battery terminals.

    Available on backorder

  • -16%Limited
    Victron SmartSolar MPPT 250/85-Tr
    Victron SmartSolar MPPT 250/85-Tr - MPPT 85A Photovoltaic - Wind Turbine Charging Regulator 586.00 
    493.00  Excluding VAT
    611.32  Includes VAT

    Victron SmartSolar MPPT 250/85-Tr - MPPT 85A Photovoltaic - Wind Turbine Charging Regulator

    Advanced finding of optimal power efficiency in case of partial shading

    Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

    Specifications

    Model No.
    MPPT 250/60 MPPT 250/70 MPPT 250/85 MPPT 250/100
    Electrical data
    Max. Solar Input Power
    860/1720/3440 W 1000/2000/4000 W 1200/2400/4900 W 1450/2900/5800 W
    Max. Solar Panel Open Circuit Voltage
    250 V 250 V 250 V 250 V
    Max. Solar Panel Short Circuit Current
    A 35 A 35 A 70 A 70
    Nominal System (Battery) Voltage
    12 / 24 / 48 V 12 / 24 / 48 V 12 / 24 / 48 V 12 / 24 / 48 V
    Self-Consumption
    35 mA 35 mA 35 mA 35 mA
    Peak Conversion Efficiency
    99.00% 99.00% 99.00% 99.00%
    General Data

     

    Available on backorder

  • -15%Limited
    Photovoltaic autonomous 1.50KWh_12V / 220V / AC 740.00 
    629.00  Excluding VAT
    779.96  Includes VAT

    1.35KWh to 1.50KWh with operating voltage 12v DC / 220VAC. Produced energy 24 hours a day during the summer months.

    Price without VAT.

    Available on backorder

  • -21%LimitedSOLD OUT
    Victron Phoenix Inverter 48/5000 1,560.00 
    1,239.00  Excluding VAT
    1,536.36  Includes VAT

    Victron Phoenix 48V / 5000VA, inverter for autonomous photovoltaic systems

    Price without VAT

    Out of stock

  • -60%Limited
    410-WATT-420-WATT-Half-cell-perc-photovoltaic-net-metering
    410 Watt – 420 Watt half cell Photovoltaic Panel Monocrystalline EUROPEAN 197.00 
    79.00  Excluding VAT
    97.96  Includes VAT

    410 Watt - 420 WATT PHOTOVOLTAIC PANEL EUROPEAN Solar Energy Monocrystalline Silicon 72 CELLS

    Suitable for interconnected systems 5kw / 10kw / 100kw and for autonomous systems using MPPT Controller 100 / 150v

    In stock

  • -23%Limited
    Epsolar Epever MSC-3210N MPPT 24V 30A Charge Controller
    Epsolar Epever MSC-3210N MPPT 24V 30A Charge Controller 126.29 
    97.00  Excluding VAT
    120.28  Includes VAT

    Epsolar Epever MSC-3210N MPPT 24V 30A Charge Controller

    Epsolar charger suitable for installations up to 30A at 24V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.

    Available on backorder

SE SE25K, grid inverter for photovoltaics, prices,

SE SE25K, grid inverter for photovoltaics, prices,

SE SE25K network inverter for photovoltaics, prices, discounts, offers, technical data, net metering photovoltaics

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category