Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
With the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Price without VAT
Available on backorder
With the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Price without VAT
Weight | 1 kg |
---|---|
Brand |
PWM controller
Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
Programmable charging current ratio (normal setting: equal current for both batteries)
Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
Internal heat sensor and optional remote control heat sensor
It is protected from overvoltage
It is protected against short circuits
It is protected from reverse polarity of photovoltaic panels and / or batteries.
BlueSolar 12 / 24-10 with timer 10A to 12V or 24V
Price without VAT
Available on backorder
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type | MPPT |
Power (W) | 145 (12V) / 290 (24V) |
Manufacturer | VictronEnergy |
Input voltage (V) | 75 |
Output Voltage (V) | 12/24 |
IP Protection | IP43 (electronic components), IP22 (connection area) |
Weight (kg) | 0.5 |
Warranty (years) | 5 years |
Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. So, theavailability of the lighting will increase even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct Connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED drivers.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older version can be updated for this
Price without VAT
In stock
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
Price without VAT
Out of stock
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
Terminal for connecting two female photovoltaic panel plugs to one Female
Price without VAT
In stock
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
MC4 terminal Male MC4 Solar Connector male for secure data protection.
Price without VAT
In stock
25mm Solar cable with 3 layers of insulation & protection from ultraviolet radiation.
Single-pole cable for resistance to adverse weather conditions and solar radiation, suitable for use in photovoltaic systems & battery connection
Price without VAT
In stock
BMV-PC interface for exporting battery charge / discharge data to Excel
Price without VAT
Available on backorder
Terminal for connecting two male photovoltaic panel plugs to a Female
Price without VAT
In stock
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Female MC4 (Male) with type Y cable branching to 2 MC4 Males.
Price without VAT
Out of stock
Charging regulator cable Communication cable CC-USB-TTL-150U for charge regulators, EPsolar LS-BP, LS-BPL, TRACER-BP, TRACER-BPL, DCCP-DP Solar Controller
Price without VAT
In stock
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Out of stock
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
Closed type photovoltaic batteries GEL 2V RES 4 SOPzV 565Ah / C120 of the Greek company Sunlight is a new economical solution suitable and efficient for energy storage in medium and large autonomous photovoltaic systems.
Capacity:
568Ah / C120
Dimensions: 198mm x 83mm x 568mm (Height 595 mm with poles). Weight 28.7 Kg
Price without VAT.
Available on backorder
The new type MultiPlus is intended to replace the previous MultiPlus Compact series. It is a powerful pure sine wave inverter and a sophisticated battery charger with adaptive charging technology as well as a high-speed AC transfer switch, all in a compact metal frame.
Available on backorder
In stock
105AH / 12V 5-7 years lifespan.
The price does not include VAT + shipping
Out of stock
Huawei SUN2000 2KTL L1-2kW Photovoltaic Inverter Single Phase. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
Victron SmartSolar MPPT 450/200-Tr – MPPT Charge Controller 200A Photovoltaics
Victron Energy charging regulator suitable for installations up to 200A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.
The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic stability of the output voltage. Last but not least is the range of communication and feature configuration options offered by Victron using VE.Direct software.
Technical Characteristics
Power : 1200 VA
Input voltage: 12 V DC
Output voltage: 230 V AC
Έξοδος: SHUKO
Peak power: 2400 W
Performance level : 94%
Available on backorder
4000VA 48V with charger and switch relay, pure sine / 30 min
Studer converters with integrated Compact series battery-charger
Compact series inverters come with 3 devices - a sinusoidal inverter, a battery charger and a transfer system.
Price without VAT
Available on backorder
Available on backorder
1100W mains converter
Special prices for the purchase of more than 3 pieces
Windy Boy 1100s are inverters for supplying the grid with small and very small wind power systems and for use in remote networks. Windy Boy Inverters are compatible, like all SMA Inverters, with all communication products and are distinguished by the high protection class IP65 and the high level of SMA grid guard® network surveillance regardless of their location.
Price without VAT
In stock
Not a member? Create an account
Already got an account? sign in here