20A continuous operation and max 25A charge regulator programmable for use even in lighting columns, garden lights with night operation capability.

Technical analysis

Solar charge controller for street light
Dual timer function
Battery type selection
Full electronic protection
Solar charge controller

1. Intelligent system optimum controller
2. High efficient series PWM charging with temperature compensation
3. Compact size
4. Use mosfet as electronic switch, without any mechanical switch
5. Digital LED menu, only one key solve all setting simple
6. Widely used, automatically recognize day / night
7. Intelligent timer function with 1-15 hours option
8. Unique dual timer function, enhance the flexibility of street light system.
9. Gel, sealed and flooded battery type option
10. Load status display
11. Big terminals and big distance between terminals
12. Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
13. Reverse polarity protection: Any combination of solar module and battery
14. Load work mode: Light on + dual timer, dusk to dawn, test, on / off
Model LS2024R
Rated Current 20A
System Voltage 12 / 24V auto work
Over Load Protection 1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds
Short Circuit Protection 3.5 times of rated current
Self-consumption Max. 6mA
Working Temperature -35'C to + 55'Cindustrial
Equalize Charging Voltage 14.6V; X2 / 24V
Boost Charging Voltage 14.4V; X2 / 24V
Float Charging Voltage 13.8V; X2 / 24V
Boost Reconnect Charging Voltage 13.2V; X2 / 24V
Temperature Compensation -30mV / 'C / 12V
Under Voltage Warning Voltage 12.0V; X2 / 24V
Low Voltage Disconnect Voltage 11.1V; X2 / 24V
Low Voltage Reconnect Voltage 12.6V; X2 / 24V
Terminals 10mm2
Enclosure IP30

Charging regulator VS6024BN 60A PWM with programmable screen

Suitable for charging the batteries with current up to 60A (ie with photovoltaic panels with a total power of 1.500Wp at 24V or 750Wp at 12V). It also has a socket for connecting devices, with their automatic shutdown before the battery is completely discharged, thus protecting it from premature wear. The regulator stops charging automatically when the batteries charge.

It has digital screen with indications of the charging status and voltage of the batteries or the output of the panels in Ampere and the possibility of adjusting the charging voltage of the batteries. Shows the battery charge rate, what is the operating voltage while fully programmed.

Price without VAT