Renewable Energy> Photovoltaic-Batteries-Inverters-Regulators
Open Sidebar
-33%Limited
phocos-cml10.jpg
Add to Compare Added to Compare

Phocos CML 10-2

Phocos CML 05-2

19.00 € + VAT

Phocos CML 20-2

41.00 € + VAT
39.00 €
26.00 € Excluding VAT
32.24 € Includes VAT

10A 12V / 24V

Solar Charge Regulators

Price without VAT

Only 3 pieces left in stock.
  ... people are viewing this right now
  Share

10A 12V / 24V

Solar Charge Regulators

  • Battery State-of-Charge display with 3 LEDs

 

  • Acoustic load disconnect pre-warning

 

  • PWM setting (type series)

 

  • Boost, and float charge, and for VRLA

 

  • Automatic 12/24 Volt detection

 

  • Built-in temperature compensation

 

  • Large terminals (up to 16mm2 cable size)

 

  • SOC and voltage controlled LVD

 

  • Fully electronic protection

 

Price without VAT

Weight 1 kg
Brand

SKU: Phocos CML 10-2 Categories: ,

you may also like...

-41%Limited
Add to cart
Phocos CML 20-2 69.00 €
41.00 € Excluding VAT
50.84 € Includes VAT

20A 12V / 24V

Solar Charge Regulators

Price without VAT

In stock

-13%LimitedSOLD OUT
read more
Phocos CXN 20 CHARGING REGULATOR PHOCOS 12V-24V 20A for autonomous photovoltaics
Phocos CXN 20 69.00 €
60.00 € Excluding VAT
74.40 € Includes VAT

 Phocos CXN 20 CHARGING REGULATOR PHOCOS 12V-24V 20A for autonomous photovoltaics

Price without VAT

Out of stock

-41%LimitedSOLD OUT
read more
Phocos CXN 10 CHARGING REGULATOR PHOCOS 12V-24V 10A
Phocos CXN 10 CHARGING REGULATOR PHOCOS 12V-24V 10A 69.00 €
41.00 € Excluding VAT
50.84 € Includes VAT

Phocos CXN 10 CHARGING REGULATOR PHOCOS 12V-24V 10A

Price without VAT

Out of stock

-44%LimitedSOLD OUT
read more
Phocos CXN 40 40A digital charge regulator
Phocos CXN 40 40A digital charge regulator 129.00 €
72.00 € Excluding VAT
89.28 € Includes VAT

 Phocos CXN 40 40A digital charge regulator

Price without VAT

Out of stock

Related products

-17%Limited
Add to cart
CHARGING REGULATOR PHOCOS CX-2048 24 / 48V - 20A 119.16 €
99.00 € Excluding VAT
122.76 € Includes VAT

Use in small autonomous and large photovoltaic installations. The charge regulator for photovoltaics CX20-48 has an LCD graphic display, which displays the charge status of the battery and the charge, as well as the operation of the photovoltaics.

Price without VAT

In stock

-31%LimitedSOLD OUT
read more
CHARGING REGULATOR PHOCOS CX-40 12 / 24V - 40A 97.30 €
67.00 € Excluding VAT
83.08 € Includes VAT

System voltage: 12V / 24V automatic selection. Maximum charging / load current: 40A / 40A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22

Price without VAT

Out of stock

-15%Limited
Add to cart
Victron BlueSolar PWM PRO
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics 81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics

The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.

General characteristics:

  1. The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Programmable with night mode
  3. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  4. Battery status check function (Remote Panel required)
  5. Night mode (Remote Panel required)
  6. Load output with battery discharge protection, overload protection and short circuit.
  7. Reverse polarity protection of photovoltaic - battery.
  8. Optional external temperature sensor.

Specifications 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 30A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 30A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C
Supported Battery Types Bleisäure, AGM, Gel

 

Available on backorder

-16%Limited
Add to cart
Victron BlueSolar
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics 51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics

The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.

Programmable with night mode

  1. The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  3. Battery status check function (Remote Panel required)
  4. Night mode (Remote Panel required)
  5. Load output with battery discharge protection, overload protection and short circuit.
  6. Reverse polarity protection of photovoltaic - battery.
  7. Optional external temperature sensor.

 Specifications

 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

 

Available on backorder

-19%Limited
Add to cart
CHARGING REGULATOR PHOCOS CX-4048 24 / 48V - 40A 139.00 €
113.00 € Excluding VAT
140.12 € Includes VAT

Use in small autonomous and large photovoltaic installations. Main Features The charge regulator for photovoltaics CX40-48 has an LCD graphic display, which displays the charge status of the battery and the charge.

Price without VAT

In stock

-39%LimitedSOLD OUT
read more
10A PWM charge regulator LS1024 19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT

10A, programmable charge regulator with night mode.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
　0,1,2,3,4,5,6,7 　For DC output
　0 　Dusk-to-Dawn, light is on all light
　1 　1 hours light is turned on after sunset
　2 　2 hours light is turned on after sunset
　3 　3 hours light is turned on after sunset
　4 　4 hours light is turned on after sunset
　5 　5 hours light is turned on after sunset
　6 　6 hours light is turned on after sunset
　7 　7 hours light is turned on after sunset
　0. 　8 hours light is turned on after sunset
　1. 　9 hours light is turned on after sunset
　2. 　10 hours light is turned on after sunset
　3. 　11 hours light is turned on after sunset
　4. 　12 hours light is turned on after sunset
　5. 　13 hours light is turned on after sunset
　6. 　Lights remain turned off, ON / OFF mode
　7. 　Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Out of stock

-14%Limited
Add to cart
Victron BlueSolar PWM PRO 10A
Victron BlueSolar PWM PRO 10A 29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics

The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.

Specifications 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 10A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 10A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Price without VAT

Available on backorder

-8%LimitedSOLD OUT
read more
Charging regulator VS6024BN 60A PWM-USB 129.00 €
119.00 € Excluding VAT
147.56 € Includes VAT

Charging regulator VS6024BN 60A PWM with programmable screen

Suitable for charging the batteries with current up to 60A (ie with photovoltaic panels with a total power of 1.500Wp at 24V or 750Wp at 12V). It also has a socket for connecting devices, with their automatic shutdown before the battery is completely discharged, thus protecting it from premature wear. The regulator stops charging automatically when the batteries charge.

It has digital screen with indications of the charging status and voltage of the batteries or the output of the panels in Ampere and the possibility of adjusting the charging voltage of the batteries. Shows the battery charge rate, what is the operating voltage while fully programmed.

Price without VAT

Out of stock

-17%Limited
Add to cart
Epsolar Dual Battery PWM 10A 35.00 €
29.00 € Excluding VAT
35.96 € Includes VAT

10A Dual Battery PWM charge regulator for 2 batteries. 

Feature:
· Two battery charging eliminates the extra cost of two separate solar charging systems
· Intelligent System Optimum Control
· 12 / 24V auto work
· Battery type selection
· Charging frequency optional
· High efficient Series PWM charging
· Local external temperature compensation
· Remote temperature sensor optional
· Use MOSFET as electronic switch, without any mechanical switch
· Remote meter MT-1 optional
· Electronic protection: over charging, short circuit, battery reverse polarity protection

Specification:

Electrical parameters
System voltage 12 / 24VDC Auto work
Nominal battery current 10A
Charge circuit voltage drop .0.26V
Discharge circuit voltage drop .0.15V
Self consumption ≤ 6mA
Working temperature -35 ℃ to + 55 ℃
Humidity 10% -90% NC
Enclosure IP30
Port 4mm2
Net weight 0.15KG

Price without VAT

-29%LimitedSOLD OUT
read more
20A Solar Charger PWM LS2024 19.00 €
13.50 € Excluding VAT
16.74 € Includes VAT

20A continuous operation and max 25A charge regulator programmable for use even in lighting columns, garden lights with night operation capability.

Technical analysis

Solar charge controller for street light
Dual timer function
Battery type selection
Full electronic protection
Solar charge controller


1. Intelligent system optimum controller
2. High efficient series PWM charging with temperature compensation
3. Compact size
4. Use mosfet as electronic switch, without any mechanical switch
5. Digital LED menu, only one key solve all setting simple
6. Widely used, automatically recognize day / night
7. Intelligent timer function with 1-15 hours option
8. Unique dual timer function, enhance the flexibility of street light system.
9. Gel, sealed and flooded battery type option
10. Load status display
11. Big terminals and big distance between terminals
12. Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
13. Reverse polarity protection: Any combination of solar module and battery
14. Load work mode: Light on + dual timer, dusk to dawn, test, on / off
Model LS2024R
Rated Current 20A
System Voltage 12 / 24V auto work
Over Load Protection 1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds
Short Circuit Protection 3.5 times of rated current
Self-consumption Max. 6mA
Working Temperature -35'C to + 55'Cindustrial
Equalize Charging Voltage 14.6V; X2 / 24V
Boost Charging Voltage 14.4V; X2 / 24V
Float Charging Voltage 13.8V; X2 / 24V
Boost Reconnect Charging Voltage 13.2V; X2 / 24V
Temperature Compensation -30mV / 'C / 12V
Under Voltage Warning Voltage 12.0V; X2 / 24V
Low Voltage Disconnect Voltage 11.1V; X2 / 24V
Low Voltage Reconnect Voltage 12.6V; X2 / 24V
Terminals 10mm2
Enclosure IP30

Model LS2024R    

Rated Current		 20A    

System Voltage		 12 / 24V auto work

Over Load Protection
1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds

Short Circuit Protection
3.5 times of rated current

Self-consumption
Max. 6mA

Working Temperature
-35 ° C to + 55 ° C industrial

Equalize Charging Voltage		 14.6V; x2 / 24V

Boost Charging Voltage		 14.4V; x2 / 24V

Float Charging Voltage		 13.8V; x2 / 24V

Boost Reconnect Charging Voltage		 13.2V; x2 / 24V

Temperature Compensation		 -30mV / ° C / 12V

Under Voltage Warning Voltage		 12.0V; x2 / 24V

Low Voltage Disconnect Voltage		 11.1V; x2 / 24V

Low Voltage Reconnect Voltage		 12.6V; x2 / 24V

terminals		 10 mm 2    

Price without VAT
 IP30

Out of stock

-26%LimitedSOLD OUT
read more
10A Economy Charger regulator for photovoltaic systems 19.00 €
14.00 € Excluding VAT
17.36 € Includes VAT
10A regulator Charger Economy series for small autonomous photovoltaic systems.
  • 10A battery charger for photovoltaic frame 12v 160 watt
  • With program number display and load connection output with night mode scheduling.
  • Suitable for 12V or 24V batteries (automatic selection).
  • Provides overload protection up to 130% of maximum load for 60s and 160% of maximum load for 5sec.
  • Maximum input voltage 41V.
  • Maximum voltage drop during charging 0,2V.
  • Maximum operating current 10A.
  • Warranty: 14 months.

Price without VAT

Out of stock

-27%Limited
Add to cart
Cotek CX1280 Battery Charger - 12V - 80A - 230VAC 679.00 €
499.00 € Excluding VAT
618.76 € Includes VAT

Cotek CX1280 Battery Charger - 12V - 80A - 230VAC 

Price without VAT

In stock

Most viewed products

Recently viewed products

Phocos CML 10-2, CHARGER REGULATOR,

Phocos CML 10-2, CHARGER REGULATOR,

Phocos CML 10-2, charge regulator for photovoltaic systems, offers, prices

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Clear All Let's Compare!
Category