Renewable Energy> Photovoltaic-Batteries-Inverters-Regulators
Open Sidebar
-17%LimitedSOLD OUT
mppt-20a-2215a-solar-charger-20a-epsolar.jpg
Add to Compare Added to Compare

Mppt 2210A 20A with digital display charge controller

Mppt 4210A 40A Display charge regulator

119.00 € + VAT
ADJUSTMENT CHARGING MPT ECO CM 60 150V / 60A for photovoltaics

Mppt ECO CM 6048 / 60A DISPLAY charge regulator

297.00 € + VAT
89.00 €
74.00 € Excluding VAT
91.76 € Includes VAT

Charging regulator Mppt 2210A 20A 520 watt MAX PV panel 24V with digital display (control screen) Features: • Advanced MPPT technology • High tracking efficiency no less than 99.5% • Peak conversion efficiency of 98% • Ultra-fast tracking speed • Accurately recognizing and tracking of multiple power point • Multi-function LCD displays system information intuitively • User programmable for battery types, load control etc. • 3-Stage charge with PWM output • Common positive grounding design • RS485 port with industrial standard MODBUS open architecture • Fully programmable function via PC software or remote meter

Price without VAT

Out of stock

  ... people are viewing this right now
  Share

Charging regulator Mppt 2210A 20A 520 watt MAX PV panel 24V with digital display (control screen)

Features: 
• Advanced MPPT technology
• High tracking efficiency no less than 99.5%
• Peak conversion efficiency of 98%
• Ultra-fast tracking speed
• Accurately recognizing and tracking of multiple power points
• Multi-function LCD displays system information intuitively
• User programmable for battery types, load control etc.
• 3-Stage charge with PWM output
• Common positive grounding design
• RS485 port with industrial standard MODBUS open architecture
• Fully programmable function via PC software or remote meter

Electronic protection:
• PV reverse polarity protection
• PV short circuit protection
• PV over current alarm protection
• Battery overcharge protection
• Battery over discharge protection
• Battery reverse polarity protection
• Load short circuit protection
• Load overload protection
• Controller overheating protection

 

MT50 

Model

Tracer1210A

Tracer2210A

Tracer3210A

Tracer4210A

Nominal system voltage

12 / 24V auto work

Rated battery current

10A

20A

30A

40A

Rated load current

10A

20A

30A

40A

Max. PV open circuit voltage

100V

Max. battery voltage

32V

Max. PV input power

130W (12V)

260W (12V)

390W (12V)

520W (12V)

260W (24V)

520W (24V)

780W (24V)

1040W (24V)

Equalize charging voltage

Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V

Boost charging voltage

Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V

Float charging voltage

Gel / Sealed / Flooded: 13.8V

Low voltage reconnect voltage

Gel / Sealed / Flooded: 12.6V

Low voltage disconnect voltage

Gel / Sealed / Flooded: 11.1V

Self-consumption

≤20mA (12V) ≤16mA (24V)

Grounding

Common positive 

temp. compensation

-3mV / ℃ / 2V

Communication Port

RS485 / RJ45 interface

Working temperature

-25℃ to +45 ℃

Storage temperature

-35℃ to +80 ℃

Humidity

≤95% NC

Enclosure

IP30

Overall dimensions

172x139x44mm

172x139x44mm

228x164x55mm

252x180x63mm

Port

4mm2

10mm2

10mm2

10mm2

Net weight

0.6kg

1.1kg

1.2kg

1.9kg

 
Price without VAT
Weight 1.2 kg
Brand

SKU: Mppt 2210A 20A with digital display charge regulator Categories: , , , ,

you may also like...

-16%Limited
Add to cart
Victron SmartSolar MPPT 150/85-MC4 - MPPT Photovoltaic Charging Regulator 85A 494.00 €
415.00 € Excluding VAT
514.60 € Includes VAT

Victron SmartSolar MPPT 150/85-MC4 - MPPT Photovoltaic Charging Regulator 85A

Victron charge controller, which has built-in Bluetooth for wireless and easy connection as well as a socket so you can insert-connect display and configuration screen. Even in cases of increased cloud cover where the light radiation changes constantly, with the Victron SmartSolar MPPT 150/85 MC4 Charging Controller ito improve energy harvest until 30% compare to common Charge Controllers PWM and until 10% compare to slower regulators MPPT. In addition to the system BatteryLife - an intelligent battery management system and with electronic components protected by resin, we have a complete solution for environmental protection.

Specifications

BlueSolar charge controller MPPT 150/45 MPPT 150/60 MPPT 150/70 MPPT 150/85 MPPT 150/100
battery voltage 12/24/48 V Auto Select
Rated charging current 45A 60A 70A 85A 100A
Maximum PV power

12V: 650W / 24V: 1300W /

48V: 2600W

12V: 860W / 24V: 1720W /

48V: 3440W

12V: 1000W / 24V: 2000W /

48V: 4000W

12V: 1200W / 24V: 2400W

48V: 4800 W

12V: 1450W / 24V: 2900W /

48V: 5800W
Maximum PV open circuit voltage

150V absolute maximum coldest conditions
145V Start-up and Operating Maximum
Maximum efficiency 98%
Self-consumption 10 mA
Charge voltage 'absorption' Default setting: 14,4 / 28,8 / 43,2 / 57,6 V 
Charge voltage 'float' Default setting: 13,8 / 27,6 / 41,4 / 55,2 V 
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / ° C resp. -32 mV / ° C
Data communication port and
remote on-off		 VE.Direct
Operating temperature -30 ° C à 60 ° C (full rated output up to 40 ° C)
Humidity (non-condensing)  Max. 95% 

Available on backorder

-16%Limited
Add to cart
Victron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines 340.00 €
286.00 € Excluding VAT
354.64 € Includes VAT

Victron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines

Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

Specifications

Blue Solar MPPT 150/60 Tr
Battery Voltage 12/24/48 V Auto Select (software tool needed to select 36V)
Rated charging current A 60
Maximum PV power 12V 1a, b)   860w
Maximum PV power 24V 1a, b)
 1720w
Maximum PV power 48V 1a, b) 3440w

Available on backorder

-15%Limited
Add to cart
Victron MPPT 10A Special Offer
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines 48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT

Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines

Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.

 

Specifications

 

Type MPPT
Power (W) 145 (12V) / 290 (24V)
Manufacturer VictronEnergy
Input voltage (V) 75
Output Voltage (V) 12/24
IP Protection IP43 (electronic components), IP22 (connection area)
Weight (kg) 0.5
Warranty (years) 5 years
Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct

 

Available on backorder

-17%Limited
Add to cart
ADJUSTMENT CHARGING MPT ECO CM 60 150V / 60A for photovoltaics
Mppt ECO CM 6048 / 60A DISPLAY charge regulator 359.00 €
297.00 € Excluding VAT
368.28 € Includes VAT

ECO PCM 60 12V / 24V / 48V Charging Regulator - MPPT 60A / 1520 WATT 24Volt & 3040 WATT 48Volt

Price without VAT

In stock

Related products

-15%Limited
Add to cart
Victron BlueSolar PWM PRO
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics 81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics

The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.

General characteristics:

  1. The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Programmable with night mode
  3. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  4. Battery status check function (Remote Panel required)
  5. Night mode (Remote Panel required)
  6. Load output with battery discharge protection, overload protection and short circuit.
  7. Reverse polarity protection of photovoltaic - battery.
  8. Optional external temperature sensor.

Specifications 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 30A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 30A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C
Supported Battery Types Bleisäure, AGM, Gel

 

Available on backorder

-44%Limited
Add to cart
WATERPROOF CHARGING REGULATOR LS1024BP 57.00 €
32.00 € Excluding VAT
39.68 € Includes VAT

Charging regulator  waterproof / waterproof LS1024BP 10A PWM with aluminum body IP67. Suitable for outdoor use or operation facing the sea. Ideal for outdoor garden lights, light columns, yachts, caravans, caravans

Price without VAT

In stock

-16%Limited
Add to cart
Victron BlueSolar
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics 51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics

The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.

Programmable with night mode

  1. The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
  2. Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
  3. Battery status check function (Remote Panel required)
  4. Night mode (Remote Panel required)
  5. Load output with battery discharge protection, overload protection and short circuit.
  6. Reverse polarity protection of photovoltaic - battery.
  7. Optional external temperature sensor.

 Specifications

 

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V, 24V
Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines
Permitted Humidity max. 98% (not condensing)
IP Protection IP30
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

 

Available on backorder

-15%Limited
Add to cart
Victron BlueSolar PWM
Victron BlueSolar PWM PRO 12 / 24V-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics 26.00 €
22.00 € Excluding VAT
27.28 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics

The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.

Specifications

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 5A
Standby Self-Consumption 10mA
Battery Voltage 12V, 24V
Load Current max. 5A
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 5A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-26%LimitedSOLD OUT
read more
10A Economy Charger regulator for photovoltaic systems 19.00 €
14.00 € Excluding VAT
17.36 € Includes VAT
10A regulator Charger Economy series for small autonomous photovoltaic systems.
  • 10A battery charger for photovoltaic frame 12v 160 watt
  • With program number display and load connection output with night mode scheduling.
  • Suitable for 12V or 24V batteries (automatic selection).
  • Provides overload protection up to 130% of maximum load for 60s and 160% of maximum load for 5sec.
  • Maximum input voltage 41V.
  • Maximum voltage drop during charging 0,2V.
  • Maximum operating current 10A.
  • Warranty: 14 months.

Price without VAT

Out of stock

-39%LimitedSOLD OUT
read more
10A PWM charge regulator LS1024 19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT

10A, programmable charge regulator with night mode.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
　0,1,2,3,4,5,6,7 　For DC output
　0 　Dusk-to-Dawn, light is on all light
　1 　1 hours light is turned on after sunset
　2 　2 hours light is turned on after sunset
　3 　3 hours light is turned on after sunset
　4 　4 hours light is turned on after sunset
　5 　5 hours light is turned on after sunset
　6 　6 hours light is turned on after sunset
　7 　7 hours light is turned on after sunset
　0. 　8 hours light is turned on after sunset
　1. 　9 hours light is turned on after sunset
　2. 　10 hours light is turned on after sunset
　3. 　11 hours light is turned on after sunset
　4. 　12 hours light is turned on after sunset
　5. 　13 hours light is turned on after sunset
　6. 　Lights remain turned off, ON / OFF mode
　7. 　Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Out of stock

-25%LimitedSOLD OUT
read more
Hybrid Controller 600W 199.00 €
149.00 € Excluding VAT
184.76 € Includes VAT

Hybrid controller SAC SSWC-06-1224 with Digital Display
PMW technology,
Reinforced circuit.
12V / 24V operation. Automatic Identification System.

 

Price without VAT

Out of stock

-31%LimitedSOLD OUT
read more
Charging regulator LS1024EU 10A PWM-USB 18.00 €
12.40 € Excluding VAT
15.38 € Includes VAT

Ο charge regulator LS1024EU 10 provides efficient charging by applying the new PWM technology increasing the battery life and improving the performance of the photovoltaic panels of a system · Has MOSFET as electronic switch, without mechanical switch · Provides LED indicators that inform about the voltage status of the battery · Provides control Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.

Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection

Price without VAT

Out of stock

-16%Limited
Add to cart
Best Offer Victron PWM 20A
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics 57.00 €
48.00 € Excluding VAT
59.52 € Includes VAT

Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics

Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.

Specifications

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 48V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 100V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-31%LimitedSOLD OUT
read more
CHARGING REGULATOR PHOCOS CX-40 12 / 24V - 40A 97.30 €
67.00 € Excluding VAT
83.08 € Includes VAT

System voltage: 12V / 24V automatic selection. Maximum charging / load current: 40A / 40A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22

Price without VAT

Out of stock

-15%Limited
Add to cart
Bluesolar PWM Light 48V-30A
Victron BlueSolar PWM Light 48V / 30A - PWM 30A Charging Regulator for Photovoltaics 66.00 €
56.00 € Excluding VAT
69.44 € Includes VAT

Victron BlueSolar PWM Light 48V-30A - PWM 30A Charging Regulator for Photovoltaics

The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.

Specifications

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 48V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 30A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 100V
Max. Current Solar Module 30A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-23%Limited
Add to cart
Cotek CX2440 Battery Charger - 24V - 40A - 230VAC 495.00 €
379.00 € Excluding VAT
469.96 € Includes VAT

Cotek CX2440 Battery Charger - 24V - 40A - 230VAC 

Price without VAT

In stock

Most viewed products

Recently viewed products

  • -31%Limited
    Add to cart
    Closed type GEL battery
    4 SOPZV 565AH / C120 GEL closed battery 255.00 €
    177.00 € Excluding VAT
    219.48 € Includes VAT

    Closed type photovoltaic batteries GEL 2V RES 4 SOPzV 565Ah / C120  of the Greek company Sunlight is a new economical solution suitable and efficient for energy storage in medium and large autonomous photovoltaic systems.

    Capacity:

    568Ah / C120

    Dimensions: 198mm x 83mm x 568mm (Height 595 mm with poles). Weight 28.7 Kg

    Price without VAT.

    Available on backorder

  • -16%Limited
    Add to cart
    Victron-Energy-MultiPlus-12-2000-80-32-inverter
    Victron Energy MultiPlus 12/2000/80-32 Photovoltaic inverter 1,092.00 €
    918.00 € Excluding VAT
    1,138.32 € Includes VAT

    What is a Victron MultiPlus inverter?

    The new type MultiPlus is intended to replace the previous MultiPlus Compact series. It is a powerful pure sine wave inverter and a sophisticated battery charger with adaptive charging technology as well as a high-speed AC transfer switch, all in a compact metal frame.

    Available on backorder

  • -11%Limited
    Add to cart
    50A digital solar charge regulator with Liquid crystal display for photovoltaic panels up to 750 watts / 12v or up to 1500watt / 24v Polycrystalline
    50A digital charging regulator with LCD & usb screen 89.00 €
    79.00 € Excluding VAT
    97.96 € Includes VAT

    50A digital solar charge regulator with Liquid crystal display for photovoltaic panels up to 750 watts / 12v or up to 1500watt / 24v Polycrystalline

    In stock

  • -15%LimitedSOLD OUT
    read more
    Delphi Freedom 2000 293.00 €
    249.00 € Excluding VAT
    308.76 € Includes VAT

    105AH / 12V 5-7 years lifespan.

    The price does not include VAT + shipping

    Out of stock

  • -39%Limited
    Add to cart
    460 watt / 465watt photovoltaic panel, frame, for net metering, net metering, stand-alone system
    460 watt-465 watt half cells frame, photovoltaic, panel 299.00 €
    181.00 € Excluding VAT
    224.44 € Includes VAT

    460 watt-465 watt half cell-cut photovoltaic panel, framework for net metering and large autonomous systems

    Minimum quantity 6 pieces

  • -40%Limited
    Add to cart
    Huawei SUN2000 2KTL L1-2kW Photovoltaic Inverter Single-phase photovoltaic, net metering, roof photovoltaic, home
    Huawei SUN2000 2KTL L1-2kW Photovoltaic Inverter Single Phase 754.00 €
    453.00 € Excluding VAT
    561.72 € Includes VAT

    Huawei SUN2000 2KTL L1-2kW Photovoltaic Inverter Single Phase. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.

    Available on backorder

  • -16%Limited
    Add to cart
    Victron Energy SmartSolar-MPPT-RS-450/200-Tr-Charge controller for PV
    Victron SmartSolar MPPT 450/200-Tr – MPPT Charge Controller 200A Photovoltaics 2,299.00 €
    1,932.00 € Excluding VAT
    2,395.68 € Includes VAT

    Victron SmartSolar MPPT 450/200-Tr – MPPT Charge Controller 200A Photovoltaics

    Victron Energy charging regulator suitable for installations up to 200A at 48V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.

    Available on backorder

  • -29%Limited
    Add to cart
    Victron Phoenix 12/1200 Schuko outlet * - Pure Sine Inverter with Power 1200 VA for Photovoltaics 425.00 €
    300.00 € Excluding VAT
    372.00 € Includes VAT

    Victron Phoenix 12/1200 Schuko outlet * - Pure Sine Inverter 12V / 1200VA / 230V for Photovoltaics

    The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.

    The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic stability of the output voltage. Last but not least is the range of communication and feature configuration options offered by Victron using VE.Direct software.

    Technical Characteristics

    Power : 1200 VA

    Input voltage: 12 V DC

    Output voltage: 230 V AC

    Έξοδος: SHUKO

    Peak power: 2400 W

    Performance level : 94%

     

    Available on backorder

  • -29%Limited
    Add to cart
    Studer C 4000-48
    Studer C 4000-48 3,147.00 €
    2,249.00 € Excluding VAT
    2,788.76 € Includes VAT

    4000VA 48V with charger and switch relay, pure sine / 30 min

    Studer converters with integrated Compact series battery-charger
    Compact series inverters come with 3 devices - a sinusoidal inverter, a battery charger and a transfer system.

    Price without VAT

    Available on backorder

  • -26%Limited
    Add to cart
    Pure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 24V with WiFi / bluetooth
    Pure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 12V 864.00 €
    640.00 € Excluding VAT
    793.60 € Includes VAT

    Pure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 12V

    Pure Sine Inverter Victron Phoenix 12/2000 Smart 2000VA 12V

    with WiFi

    Available on backorder

Mppt 2210A 20A with digital display charge regulator EPSOLAR TRACER,

Mppt 2210A 20A with digital display charge regulator EPSOLAR TRACER,

EPSOLAR TRACER Mppt 2210A 20A with digital display charging regulator purchase price

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Clear All Let's Compare!
Category