Renewable Energy> Photovoltaic-Batteries-Inverters-Regulators
Open Sidebar
-17%Limited
mppt15a_12v-24v-low.jpg
Add to Compare Added to Compare

MPPT - 15A - 360WATT

Phocos CIS Series20A

52.50 € + VAT

MPPT 30A-12V - 300Watt

119.90 € + VAT
69.00 €
57.00 € Excluding VAT
70.68 € Includes VAT

15A - MPPT 360W 12 / 24V -Low voltage charging regulator for polycrystalline type panels with open circuit voltage (Voc) up to 40 VOLT. Reduces losses from 10% -30% by increasing the performance of the stand-alone system compared to simple chargers.

Price without VAT

In stock

  ... people are viewing this right now
  Share

15A - MPPT 360W 12 / 24V -Low voltage charging regulator for polycrystalline type panels with open circuit voltage (Voc) up to 40 VOLT. Reduces losses from 10% -30% by increasing the performance of the stand-alone system compared to simple chargers.

They are expected

Solar MPPT15 15A 12V / 24V 

Solar MPPT15 15A (also known as MPPT intelligent solar controller, solar charge controller, solar controller, PV controller) can intelligently regulate the operating voltage of solar panels, letting the solar panel always operate at the maximum power point of the VA curve. Compared to the standard solar controller, this MPPT controller can increase the efficiency of photovoltaic modules by 10% -30%. WS-MPPT solar controllers 10A - 60A 12V include series, 24V and 48V series.
 
MPPT advantage:
Maximum Power Point Tracking (MPPT for short) is a system that allows photovoltaic panels at the outputs More power by adjusting the operating mode of the electrical unit. Figure 1A shows that the regular controller, which makes the PV battery operated at 12V, outputs only a 53W power point (a general power point), B shows that the MPPT controller makes a PV battery always operate at the maximum power point, thus outputting at a power point of 75W (the maximum power point).
 
Product features:
Applicable to various types of batteries,
MPPT function
Temperature sensor battery charging compensation
Overload protection (automatic restoration)
Overcharge protection
Short circuit protection (automatic restoration),
Thunder protection
Reverse discharge protection
Reverse polarity connection protection (automatic restoration)
Under voltage protection
 
MPPT principle:
The maximum power point is mainly affected by the ambient temperature and the intensity of the sunshine. The intensity of the sunshine is constant, the maximum output power decreases with increasing temperature. The temperature is constant when the sunshine intensifies, the open circuit voltage of the photovoltaic battery keeps virtually unchanged. But the short circuit current increases significantly, resulting in the maximum output power increases significantly.
 
This WS-MPPT solar MPPT can intelligently adjust the operating voltage of solar panels, leaving the solar panel always running at the maximum power point of the VA curve. Compared to the standard solar controller, this MPPT controller can increase the efficiency of photovoltaic modules by about 30%.
 
However, due to many different factors, such as the difference in solar panel reception, the change in Sun lighting intensity, temperature change, the efficiency of the controller, etc., the actually available increased rate is 10% -30%.
 
Model
WS-MPPT15 10A
WS-MPPT15 15A
Rated Voltage
12V/24V/48V  
Max Load current
10A
15A
Input voltage range
12V ~ 20V / 24V ~ 40V / 48V ~ 80V
Length≤1m
 Charge loop drop
0.25V
Length≤1m
Discharge loop drop
0.05V
Over voltage protection
17V/34V/68V
Full charge cut
13.7V/27.4V/54.8V
Low voltage cut
10.5V~11V /21V~22V /42V~43V
Temperature compensation
-3mv / ° C / cell
No load loss
≤ 10mA
Max wire area
2.5 mm2
2.5mm2
Ambient temperature
–25 ° C —- + 55 ° C

Price without VAT

 
Weight 1 kg
Brand

SKU: MPPT - 15A - 360WATT Categories: ,

you may also like...

-12%Limited
Add to cart
MPPT-40A-12-24-48V-1000Watt 340.00 €
299.00 € Excluding VAT
370.76 € Includes VAT

40 Max Charging Current / 35A Max PV Input Current- 1500Watt power / Solar panel - 12V-24V-36V-48V

MPVT (Maximum Power Point Tracking) photovoltaic charge regulator

Price without VAT

In stock

-20%Limited
Add to cart
MPPT-60A-12-24-48V-1500Watt 498.00 €
399.50 € Excluding VAT
495.38 € Includes VAT

60 Max Charging Current / 35A Max PV Input Current- 1500Watt power / Solar panel - 12V-24V-36V-48V

MPVT (Maximum Power Point Tracking) photovoltaic charge regulator

Price without VAT

In stock

-14%Limited
Add to cart
MPPT 30A-24V - 400Watt 159.00 €
137.00 € Excluding VAT
169.88 € Includes VAT

30 Max Charging Current / 18A Max PV Input Current - 400Watt power / Solar panel - 24V

MPPT (Maximum Power Point Tracking) photovoltaic charge regulator with 30A maximum charging current and input current from 18A photovoltaics.


Price without VAT

In stock

-16%Limited
Add to cart
MPPT 30A-12V - 300Watt 143.00 €
119.90 € Excluding VAT
148.68 € Includes VAT

30 Max Charging Current / 18A Max PV Input Current - 300Watt power / Solar panel - 12V

MPPT (Maximum Power Point Tracking) photovoltaic charge regulator with 30A maximum charging current and input current from 18A photovoltaics

Price without VAT

In stock

Related products

-26%LimitedSOLD OUT
read more
10A Economy Charger regulator for photovoltaic systems 19.00 €
14.00 € Excluding VAT
17.36 € Includes VAT
10A regulator Charger Economy series for small autonomous photovoltaic systems.
  • 10A battery charger for photovoltaic frame 12v 160 watt
  • With program number display and load connection output with night mode scheduling.
  • Suitable for 12V or 24V batteries (automatic selection).
  • Provides overload protection up to 130% of maximum load for 60s and 160% of maximum load for 5sec.
  • Maximum input voltage 41V.
  • Maximum voltage drop during charging 0,2V.
  • Maximum operating current 10A.
  • Warranty: 14 months.

Price without VAT

Out of stock

-8%LimitedSOLD OUT
read more
Charging regulator VS6024BN 60A PWM-USB 129.00 €
119.00 € Excluding VAT
147.56 € Includes VAT

Charging regulator VS6024BN 60A PWM with programmable screen

Suitable for charging the batteries with current up to 60A (ie with photovoltaic panels with a total power of 1.500Wp at 24V or 750Wp at 12V). It also has a socket for connecting devices, with their automatic shutdown before the battery is completely discharged, thus protecting it from premature wear. The regulator stops charging automatically when the batteries charge.

It has digital screen with indications of the charging status and voltage of the batteries or the output of the panels in Ampere and the possibility of adjusting the charging voltage of the batteries. Shows the battery charge rate, what is the operating voltage while fully programmed.

Price without VAT

Out of stock

-44%Limited
Add to cart
WATERPROOF CHARGING REGULATOR LS1024BP 57.00 €
32.00 € Excluding VAT
39.68 € Includes VAT

Charging regulator  waterproof / waterproof LS1024BP 10A PWM with aluminum body IP67. Suitable for outdoor use or operation facing the sea. Ideal for outdoor garden lights, light columns, yachts, caravans, caravans

Price without VAT

In stock

-16%Limited
Add to cart
Victron BlueSolar PWM
Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics 44.00 €
37.00 € Excluding VAT
45.88 € Includes VAT

Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics

Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.

Specifications : 

  • Battery Voltage: 12 / 24V (Automatic selection)
  • Night mode (details in the Remote Panel manual)
  • Rated charging current: 30 A
  • Second battery output: not available
  • Automatic load disconnection: Yes (maximum load 30A)
  • Maximum input voltage of PV panel: 28V / 55V
  • Self-consumption: <10mA
  • Protection: battery reverse polarity, short circuit, overheating
  • Operating temperature range -20 to +50 C
  • Absorption charge (default): 14.4V (12V) / 28.8V (24V)
  • Float charge (default): 13.8V (12V) / 27.6V (24V)
  • Equalization charge (default): 14.6V (12V) / 29.2V (24V)
  • Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
  • Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
  • Protection class (dust-humidity): IP 30
  • Dimensions: 138x70x37 mm
  • Warranty: 5 Years

Available on backorder

-19%Limited
Add to cart
CHARGING REGULATOR PHOCOS CX-4048 24 / 48V - 40A 139.00 €
113.00 € Excluding VAT
140.12 € Includes VAT

Use in small autonomous and large photovoltaic installations. Main Features The charge regulator for photovoltaics CX40-48 has an LCD graphic display, which displays the charge status of the battery and the charge.

Price without VAT

In stock

-16%LimitedSOLD OUT
read more
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A 91.00 €
76.00 € Excluding VAT
94.24 € Includes VAT

Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.

 

Charging Regulator, with 2 outputs for charging Batteries

  1. PWM controller
  2. Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
  3. Programmable charging current ratio (normal setting: equal current for both batteries)
  4. Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
  5. Internal heat sensor and optional remote control heat sensor
  6. It is protected from overvoltage
  7. It is protected against short circuits
  8. It is protected from reverse polarity of photovoltaic panels and / or batteries.

Price without VAT

Out of stock

-20%LimitedSOLD OUT
read more
Waterproof charging regulator LS1024EPD 10A PWM 25.00 €
20.00 € Excluding VAT
24.80 € Includes VAT

Waterproof / watertight charge regulator IP 67  LS1024EPD 10A  PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.

Price without VAT

Out of stock

-16%Limited
Add to cart
Best Offer Victron PWM 20A
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics 57.00 €
48.00 € Excluding VAT
59.52 € Includes VAT

Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics

Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.

Specifications

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 48V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 20A
Standby Self-Consumption 10mA
Max. Voltage Solar Module 100V
Max. Current Solar Module 20A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-39%LimitedSOLD OUT
read more
10A PWM charge regulator LS1024 19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT

10A, programmable charge regulator with night mode.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
　0,1,2,3,4,5,6,7 　For DC output
　0 　Dusk-to-Dawn, light is on all light
　1 　1 hours light is turned on after sunset
　2 　2 hours light is turned on after sunset
　3 　3 hours light is turned on after sunset
　4 　4 hours light is turned on after sunset
　5 　5 hours light is turned on after sunset
　6 　6 hours light is turned on after sunset
　7 　7 hours light is turned on after sunset
　0. 　8 hours light is turned on after sunset
　1. 　9 hours light is turned on after sunset
　2. 　10 hours light is turned on after sunset
　3. 　11 hours light is turned on after sunset
　4. 　12 hours light is turned on after sunset
　5. 　13 hours light is turned on after sunset
　6. 　Lights remain turned off, ON / OFF mode
　7. 　Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Out of stock

-15%Limited
Add to cart
Victron BlueSolar PWM
Victron BlueSolar PWM PRO 12 / 24V-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics 26.00 €
22.00 € Excluding VAT
27.28 € Includes VAT

Victron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics

The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.

Specifications

Manufacturer VictronEnergy
Charge Controller Type PWM
System Voltage 12V
Permitted Humidity max. 95% RF (not condensing)
IP Protection IP20
Charging Current max. 5A
Standby Self-Consumption 10mA
Battery Voltage 12V, 24V
Load Current max. 5A
Max. Voltage Solar Module 28V / 55V
Max. Current Solar Module 5A
Number of Charging Outputs 1
Ambient Temperature -20 ° C - + 50 ° C

Available on backorder

-23%Limited
Add to cart
Cotek CX2440 Battery Charger - 24V - 40A - 230VAC 495.00 €
379.00 € Excluding VAT
469.96 € Includes VAT

Cotek CX2440 Battery Charger - 24V - 40A - 230VAC 

Price without VAT

In stock

-55%LimitedSOLD OUT
read more
Charging regulator LS0512EU 5A PWM 19.00 €
8.50 € Excluding VAT
10.54 € Includes VAT

Charging regulator LS0512EU 5A PWM with USB output

 Specifications:

Ο charge regulator LS0512EU 5A provides efficient charging by applying the new PWM technology, increasing battery life and improving the performance of a system's photovoltaic panels; of the load output · Provides compensation of the temperature of the batteries ensuring proper charging and discharging of the parameters automatically

It has Electronic protection:

· Load overload protection · Short circuit protection · Battery protection against overcharging · Reverse battery polarity protection

Price without VAT

Out of stock

Most viewed products

Recently viewed products

MPPT - 15A - 360WATT,

MPPT - 15A - 360WATT,

Charging regulator 15A - MPPT 360W 12 / 24V low voltage for polycrystalline type panels with open circuit voltage (Voc) up to 40 VOLT, prices, offers

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Clear All Let's Compare!
Category