Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Pump with controler
Construction & features
Rotary blade mechanism (positive displacement) from forged
brass, carbon-graphite and stainless steel
Tighten the assembly to prevent alignment problems
Handles seawater, dissolved metals
Withstands a lot of freezes
Brushless DC motor (maintenance free) is the same for 12 and 24V
application with the same flow rates
MPP tracking, the existing amplifier for direct solar applications,
Speed control pump, low voltage for the battery Disconnect
protection, Float terminal / remote control switch and low tide
catheter
Installation and Service Manual is extremely detailed and
is displayed
Suction capacity
5 meters vertically (20 ft), at sea level. Subtract 1 m for each
1.000 m altitude. Pump should be placed as low as possible and as close as possible
as much as possible in the water source. Absorbent capacity to me
less than intake pipe friction (or clogged filter) Intake
piping should be 1 inch or larger
Filter requirement
This pump can not tolerate dirt. The water must be purified.
If the water is very dirty, improve the source or consider a different one
pump
PV-Direct (without battery) Requirements
The rated power of the photovoltaic generator must exceed the pump watts
20% or more
A linear current MPPT incl (maximum power point)
monitoring) has already been included
Solar Tracker (optional) will increase daily output (40-55% on
the summer)
installation
The pump can be mounted horizontally or vertically.
The pump must not be submerged
Can be mounted inside 120 cm or larger housing,
suspended by a rope
accessory
Inline Filter: (10 “) Uses standard filter parts
Installation kit includes: pressure switch, pressure gauge,
control, drain and shut-off valves and TEE tank
Float switch for tank closed if full
Well Drought protection sensor of the pump
Dimensions
Pump unit length 33 cm
Βάρος: 7 kg
Controller 260 x 175 x 100 mm
Βάρος: 1,5 kg
warranty
1 year from defects in materials and construction
Price without VAT
Available on backorder
Pump with controler
Construction & features
Rotary blade mechanism (positive displacement) from forged
brass, carbon-graphite and stainless steel
Tighten the assembly to prevent alignment problems
Handles seawater, dissolved metals
Withstands a lot of freezes
Brushless DC motor (maintenance free) is the same for 12 and 24V
application with the same flow rates
MPP tracking, the existing amplifier for direct solar applications,
Speed control pump, low voltage for the battery Disconnect
protection, Float terminal / remote control switch and low tide
catheter
Installation and Service Manual is extremely detailed and
is displayed
Suction capacity
5 meters vertically (20 ft), at sea level. Subtract 1 m for each
1.000 m altitude. Pump should be placed as low as possible and as close as possible
as much as possible in the water source. Absorbent capacity to me
less than intake pipe friction (or clogged filter) Intake
piping should be 1 inch or larger
Filter requirement
This pump can not tolerate dirt. The water must be purified.
If the water is very dirty, improve the source or consider a different one
pump
PV-Direct (without battery) Requirements
The rated power of the photovoltaic generator must exceed the pump watts
20% or more
A linear current MPPT incl (maximum power point)
monitoring) has already been included
Solar Tracker (optional) will increase daily output (40-55% on
the summer)
installation
The pump can be mounted horizontally or vertically.
The pump must not be submerged
Can be mounted inside 120 cm or larger housing,
suspended by a rope
accessory
Inline Filter: (10 “) Uses standard filter parts
Installation kit includes: pressure switch, pressure gauge,
control, drain and shut-off valves and TEE tank
Float switch for tank closed if full
Well Drought protection sensor of the pump
Dimensions
Pump unit length 33 cm
Βάρος: 7 kg
Controller 260 x 175 x 100 mm
Βάρος: 1,5 kg
warranty
1 year from defects in materials and construction
Price without VAT
Weight | 1 kg |
---|---|
Brand |