Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Inverter pure sine multifunction machine 1250VA / 1000 WATT with battery charger and switching system. It has:
Quadruple function:
Technical specifications:
Price without VAT
Out of stock
Inverter pure sine multifunction machine 1250VA / 1000 WATT with battery charger and switching system. It has:
Quadruple function:
Technical specifications:
The inverter:
IghHigh overload ability up to 300% rated power (20 sec)
OwLow voltage trip selectable (9.5V / 10V or 10V / 10.5V) extracting max power from various batteries with different protection
OwLow quiescent current, power saver mode to reduce power consumption to 10W (3 sec sensing cycle) / 3W (30s sensing cycle)
CDC13V battery recover point, dedicated to solar systems
The battery charger:
►3 step intelligent battery charging (bulk, absorption, and float)
►8 pre set battery type (flooded lead acid, gel, or absorbed glass mat (AGM) batteries) selector
plus de-sulphation for totally flat batteries
OwerPowerful charge rate up to 90A, selectable from 0-100%
FPFC (Power Factor Correction) for charger, less power consumption than conventional units
The transfer:
►10ms typical transfer time between battery and AC, guarantees power continuity
►15s delay before transfer when AC resumes, extra protection for loads when used with generator
PutInput AC voltage range selectable (184-253V or 154-253V) for different kinds of loads
►30 / 40A through current ability
LAllows start up and through power with depleted batteries
To remote control & others:
BilityAbility to switch the unit on / off, select / deselect power saver mode
►17 alarms / warnings, informative for easier operation and trouble-shooting
RontFront panel LED indicators and adjustable switch selectors
►Battery / AC priority switch available for off grid solar / wind system
OwLow battery, overload, and high battery, over temperature protection circuitry
►RS232 / USB communication port available
CompatGenerator compatible
Technical specifications:
General specifications: | ||||||
Input waveform: |
Sine wave (Utility or generator) |
|||||
nominal voltage: |
120VAC |
230VAC |
||||
Low voltage trip: |
80V / 90V +/- 4% |
184V / 154V + / 4% - |
||||
Low voltage engage: |
90V / 100V +/- 4% |
196V / 164 +/- 4% |
||||
High voltage trip: |
140V +/- 4% |
253V +/- 4% |
||||
High voltage re-engage: |
135V +/- 4% |
243V +/- 4% |
||||
Max input AC voltage: |
150VAC |
270VAC |
||||
Nominal input frequency: |
50Hz or 60Hz (Auto detect) |
|||||
Low frequency trip: |
47Hz for 50Hz, 57Hz for 60Hz |
|||||
High frequency trip: |
55Hz for 50Hz, 65Hz for 60Hz |
|||||
Output waveform: |
(Bypass mode) same as input |
|||||
Overload protection: |
Circuit breaker |
|||||
Short circuit protection: |
Circuit breaker |
|||||
Transfer switch rating: |
30 amp or 40 amp |
|||||
Efficiency on line transfer mode: |
95% + |
|||||
Line transfer time: |
10 ms typical |
|||||
Bypass without battery connected: |
Yes |
|||||
Max bypass current: |
30 amp or 40 amp |
|||||
Bypass over load current: |
35 amp or 45 amp: alarm |
|||||
Inverter specification / output | ||||||
Output waveform: |
Pure sine wave |
|||||
Output continuous power watts: |
1000 |
2000 |
3000 |
4000 | 5000 | 6000 |
Output continuous power VA: |
1000 |
2000 |
3000 |
4000 | 5000 | 6000 |
Power factor: |
0.9-1.0 |
|||||
Nominal output voltage rms: |
120 / 230VAC |
|||||
Output voltage regulation: |
+ - / 10% rms |
|||||
Output frequency: |
50Hz +/- 0.3Hz or 60Hz +/- 0.3Hz |
|||||
Nominal efficiency: |
>88% |
|||||
Surge ratings: |
3000 |
6000 |
9000 |
12000 | 15000 | 18000 |
Short circuit protection: |
Yes, fault after 1 sec |
|||||
THD |
<10% |
|||||
Inverter specification / input: | ||||||
Nominal input voltage: |
12.0V |
24.0V |
48.0V |
|||
Minimum starting voltage: |
10.0V |
20.0V |
40.0V |
|||
Low battery alarm: |
10.5V / 11.0V |
21V / 22.0V |
42.0 / 44.0V |
|||
Low battery trip: |
10.0V / 10.5V |
20.0V / 21V |
40.0V / 42V |
|||
High voltage alarm: |
16.0V |
32.0V |
64.0V |
|||
Low battery voltage recovery |
15.5V |
31.0V |
62.0V |
|||
Power saver: |
Below 25 watts when enabled |
|||||
Power saver: |
Same switched on / off on remote |
|||||
Charger mode specifications: | ||||||
Input voltage range: |
90-135VAC |
194-243VAC / 164-243VAC (W) |
||||
Output voltage: |
Dependent on battery type |
|||||
Max charger current: |
35A / 70A (Charger current controller) |
|||||
Battery initial voltage for start up: |
10-15.7V for 12V (* 2 for 24V; * 4 for 48V) |
|||||
Over charger protection shutdown: |
15.7V for 12V (* 2 for 24V; * 4 for 48V) |
|||||
Charger curves (4 stage constant current) battery types | ||||||
4 steps digitally controlled progressive charge | ||||||
Battery type: | Fast V | Float V (* 2 for 24V; * 4 for 48V) | ||||
GEL USA | 14.0 | 13.7 | ||||
AGM 1 | 14.1 | 13.4 | ||||
AGM 2 | 14.6 | 13.7 | ||||
Sealed lead acid | 14.4 | 13.6 | ||||
GEL Euro | 14.4 | 13.8 | ||||
Open lead acid | 14.8 | 13.3 | ||||
Calcium | 15.1 | 13.6 | ||||
De-sulphation | 15.5 for 4 hrs | |||||
Remote control / RS232 / USB | Yes, optional | |||||
mounting | wall mount | |||||
Size: in mm | 1000 model: 520 * 315 * 300 mm3 | |||||
2000/3000 model: 580 * 315 * 300 mm3 | ||||||
4000/5000/6000 model: 740*315*300 mm3 | ||||||
Gross weight: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
20Kg | 22Kg | 26Kg | 37Kg | 47Kg | 47Kg |
Weight | 12 kg |
---|---|
Brand |