10A PWM charge regulator LS1024

19.00 
11.50  Excluding VAT
14.26  Includes VAT

10A, programmable charge regulator with night mode.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
 0,1,2,3,4,5,6,7  For DC output
 0  Dusk-to-Dawn, light is on all light
 1  1 hours light is turned on after sunset
 2  2 hours light is turned on after sunset
 3  3 hours light is turned on after sunset
 4  4 hours light is turned on after sunset
 5  5 hours light is turned on after sunset
 6  6 hours light is turned on after sunset
 7  7 hours light is turned on after sunset
 0.  8 hours light is turned on after sunset
 1.  9 hours light is turned on after sunset
 2.  10 hours light is turned on after sunset
 3.  11 hours light is turned on after sunset
 4.  12 hours light is turned on after sunset
 5.  13 hours light is turned on after sunset
 6.  Lights remain turned off, ON / OFF mode
 7.  Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Out of stock

  ... people are viewing this right now

  Share

The 10A, programmable charge controller with night mode in black or white. It has a PWM microprocessor for more efficient and smoother charging. Also programmable for Night mode. It has a light sensor and a timer. It includes connectors for devices that are programmed to operate at night while at the same time they are switched off according to the respective programming.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
 0,1,2,3,4,5,6,7  For DC output
 0  Dusk-to-Dawn, light is on all light
 1  1 hours light is turned on after sunset
 2  2 hours light is turned on after sunset
 3  3 hours light is turned on after sunset
 4  4 hours light is turned on after sunset
 5  5 hours light is turned on after sunset
 6  6 hours light is turned on after sunset
 7  7 hours light is turned on after sunset
 0.  8 hours light is turned on after sunset
 1.  9 hours light is turned on after sunset
 2.  10 hours light is turned on after sunset
 3.  11 hours light is turned on after sunset
 4.  12 hours light is turned on after sunset
 5.  13 hours light is turned on after sunset
 6.  Lights remain turned off, ON / OFF mode
 7.  Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Weight 1 kg
Brand

Most viewed products

Recently viewed products

  • -20%LimitedSOLD OUT
    Single-phase with DC switch

    Out of stock

  • -20%Limited
    Unibat Photovoltaic Battery 2V SOLAR OPzS 930 (924Ah c100) -for photovoltaics and wind turbines
    Unibat Photovoltaic Battery 2V SOLAR OPzS 930 (924Ah c100) 297.60 
    237.60  Excluding VAT
    294.62  Includes VAT

    Unibat Photovoltaic Battery 2V SOLAR OPzS 930 (924Ah c100). The batteries require minimal maintenance (have a transparent container for easy control of the electrolyte level) and have excellent load recovery performance after full discharge.

    In stock

  • -28%LimitedSOLD OUT
    PHOTOVOLTAIC SE 370watt - 380 W PHOTOVOLTAIC PANEL EUROPEAN Solar Energy MONO 72 CELLS
    SE 370W - 380 WATT PHOTOVOLTAIC PANEL EUROPEAN 199.00 
    143.00  Excluding VAT
    177.32  Includes VAT

    Solar Energy SE 370W - 380 WATT  PHOTOVOLTAIC PANEL EUROPEAN Solar Energy MONO 72 CELLS

    Out of stock

  • 4 PzS 560PB 2V Deep discharge SUNLIGHT battery 123.00 
    116.20  Excluding VAT
    144.09  Includes VAT

    4 PzS 560PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 560Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.

     

    Specifications  

    Electrical voltage 2
    Capacity (C5) 560 [AH]
    Length 198 [mm]
    Width 83 [mm]
    Height 688 [mm]
    Weight 31.800 [kg]
    Ind NO

    In stock

  • -22%Limited
    Fronius PRIMO GEN24 5.0 PLUS network inverter for photovoltaic-photovoltaic, prices, technical data, purchase, cost
    Fronius PRIMO GEN24 5.0 PLUS mains inverter for photovoltaics 2,421.00 
    1,890.00  Excluding VAT
    2,343.60  Includes VAT

    Fronius PRIMO GEN24 5.0 PLUS mains inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.

  • -27%Limited
    Victron 12V8Ah AGM Deep Cycle Battery, Deep Discharge
    Victron 12V/8Ah AGM Deep Cycle Battery 27.00 
    19.69  Excluding VAT
    24.42  Includes VAT

    Victron 12V/8Ah AGM Deep Cycle Battery

    Victron 12V/8Ah AGM Deep Cycle closed type photovoltaic deep discharge battery from Victron Energy for high starting amperes.

    Available on backorder

  • -24%Limited
    MC4 female terminal
    MC4 female terminal 3.90 
    2.95  Excluding VAT
    3.66  Includes VAT

    MC4 Female MC4 Solar Connector Female for secure data protection.

    Price without VAT

  • -20%Limited
    Growatt 15000TL3-S 18000W 400V 2MPPT mains inverter for photovoltaics
    Growatt 15000TL3-S 18000W 400V 2MPPT Network Inverter 2,400.00 
    1,929.00  Excluding VAT
    2,391.96  Includes VAT

    Growatt 15000TL3-S 18000W 400V 2MPPT Network Inverter

  • -25%Limited
    IPG 3000 Vision 2,830.00 
    2,122.00  Excluding VAT
    2,631.28  Includes VAT

    3000 watt mains converter

    Its new network converter Conergyof the series IPGseries sets new data for single-phase network converters. It is the result of many years of experience and know-how Conergy in the development and manufacture of inverters for interconnected photovoltaic systems and meet the highest requirements of efficiency, functionality and design.

     Price without VAT

    In stock

  • -34%Limited
    Photovoltaic system autonomous 1.20Wh
    1.20Wh to 1.35wh Photovoltaic system autonomous 12v DC/ 220VAC. European 980.00 
    645.00  Excluding VAT
    799.80  Includes VAT

    Autonomous micro PV system 1.20Wh up to 1.35wh with operating voltage 12v DC / 220VAC. European. Produced energy 24 hours a day during the summer months. Suitable for use in security systems alarms, small cottages.

    Price without VAT.

    Available on backorder

PWM Solar Charger 10A, charge regulator,

PWM Solar Charger 10A, charge regulator,

Regulator Programmable with night mode - PWM Solar Charger 10A, has a light sensor and timer, prices

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category