10A PWM charge regulator LS1024

19.00 
11.50  Excluding VAT
14.26  Includes VAT

10A, programmable charge regulator with night mode.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
 0,1,2,3,4,5,6,7  For DC output
 0  Dusk-to-Dawn, light is on all light
 1  1 hours light is turned on after sunset
 2  2 hours light is turned on after sunset
 3  3 hours light is turned on after sunset
 4  4 hours light is turned on after sunset
 5  5 hours light is turned on after sunset
 6  6 hours light is turned on after sunset
 7  7 hours light is turned on after sunset
 0.  8 hours light is turned on after sunset
 1.  9 hours light is turned on after sunset
 2.  10 hours light is turned on after sunset
 3.  11 hours light is turned on after sunset
 4.  12 hours light is turned on after sunset
 5.  13 hours light is turned on after sunset
 6.  Lights remain turned off, ON / OFF mode
 7.  Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Out of stock

  ... people are viewing this right now

  Share

The 10A, programmable charge controller with night mode in black or white. It has a PWM microprocessor for more efficient and smoother charging. Also programmable for Night mode. It has a light sensor and a timer. It includes connectors for devices that are programmed to operate at night while at the same time they are switched off according to the respective programming.

 Technical data - programming

QUICK START INSTRUCTIONS  
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 
1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 
2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 
3. It is recommended that the connections be made in order from 1 to 6. (see the following picture)
 
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 
5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 
6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 
7. Press the BUTTON as 6 or 7 to verify the system connection.
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery!
LIGHTING CONTROL OPTIONS
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 
2. The controller requires 10 minutes of continuous transition values ​​before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 
3. 10 minutes off before the controller starts to work. 
4. A brief description follows below:
 0,1,2,3,4,5,6,7  For DC output
 0  Dusk-to-Dawn, light is on all light
 1  1 hours light is turned on after sunset
 2  2 hours light is turned on after sunset
 3  3 hours light is turned on after sunset
 4  4 hours light is turned on after sunset
 5  5 hours light is turned on after sunset
 6  6 hours light is turned on after sunset
 7  7 hours light is turned on after sunset
 0.  8 hours light is turned on after sunset
 1.  9 hours light is turned on after sunset
 2.  10 hours light is turned on after sunset
 3.  11 hours light is turned on after sunset
 4.  12 hours light is turned on after sunset
 5.  13 hours light is turned on after sunset
 6.  Lights remain turned off, ON / OFF mode
 7.  Test mode, lights on after it detects no light, lights off after it detects light.

 

Price without VAT

Weight 1 kg
Brand

Most viewed products

Recently viewed products

  • -20%Limited
    Victron Phoenix Inverter C 24/1600 - 1300W Pure Sine Inverter for Photovoltaics 920.00 
    738.00  Excluding VAT
    915.12  Includes VAT

    Victron Phoenix Inverter C 24/1600 - 1300W Pure Sine Inverter for Photovoltaics

    Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high efficiency and with high peak power at 3000W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and light. With the possibility of connection in parallel and three-phase layout.

    Technical characteristics

    Inverter off
    Power (W) 1300
    Manufacturer VictronEnergy
    Input Voltage (V) 24V DC
    Output Voltage (V) 230 AC
    Performance level (%) 94
    IP protection IP21
    Weight (kg) 10.0
    Warranty (years) 5
    Other Information Material & Color: aluminum (blue RAL 5012), Battery cables of 1.5 meter included, G-ST18i plug

    Available on backorder

  • -16%Limited
    Victron SmartSolar MPPT 250/60
    Victron SmartSolar MPPT 250/60-Tr - MPPT 60A Photovoltaic - Wind Turbine Charging Regulator 443.00 
    373.00  Excluding VAT
    462.52  Includes VAT

    Victron SmartSolar MPPT 250/60-Tr - MPPT 60A Photovoltaic - Wind Turbine Charging Regulator

    Extremely fast maximum power efficiency (MPPT) detection

    Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.

    Advanced finding of optimal power efficiency in case of partial shading

    Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

    Technical Features

     

    Model No.
    MPPT 250/60 MPPT 250/70 MPPT 250/85 MPPT 250/100
    Electrical data
    Max. Solar Input Power
    860/1720/3440 W 1000/2000/4000 W 1200/2400/4900 W 1450/2900/5800 W
    Max. Solar Panel Open Circuit Voltage
    250 V 250 V 250 V 250 V
    Max. Solar Panel Short Circuit Current
    A 35 A 35 A 70 A 70
    Nominal System (Battery) Voltage
    12 / 24 / 48 V 12 / 24 / 48 V 12 / 24 / 48 V 12 / 24 / 48 V
    Self-Consumption
    35 mA 35 mA 35 mA 35 mA
    Peak Conversion Efficiency
    99.00% 99.00% 99.00% 99.00%
    General Data

     

    Available on backorder

  • -20%Limited
    RENAC R1-1100-SS-grid-inverter for photovoltaics, net metering, photovoltaics on the roof, domestic
    RENAC R1-1100-SS R1 Mini Series Inverter 1100W Single Phase 470.00 
    374.00  Excluding VAT
    463.76  Includes VAT

    RENAC R1-1100-SS R1 Mini Series Inverter 1100W, Single-phase network inverter for photovoltaic. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.

    Available on backorder

  • -29%Limited
    Photovoltaic panel 200-205 watts Mono 199.00 
    142.00  Excluding VAT
    176.08  Includes VAT

    Photovoltaic panel ECO 200M power 200-205 watts Monocrystalline silicon.  Suitable for autonomous PV systems only with the use of high voltage MPPT charging regulators (above 90V D open circuit) . 

     They have a positive tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency up to + 3% higher efficiency.

    Available with 12 years factory warranty and 25 years 80% performance guarantee

    Price without VAT

    In stock

  • -22%Limited
    EPSOLAR EPEVER-UP-3000W / 24V M6322 prices technical manual
    EPSOLAR EPEVER-UP-3000W / 24V M6322 HYBRID INVERTER / CHARGER UPower series 936.00 
    729.00  Excluding VAT
    903.96  Includes VAT

    EPSOLAR EPEVER-UP-3000W / 24V M6322 HYBRID INVERTER / CHARGER UPower series

    Available on backorder

  • -29%LimitedSOLD OUT
    20A Solar Charger PWM LS2024 19.00 
    13.50  Excluding VAT
    16.74  Includes VAT

    20A continuous operation and max 25A charge regulator programmable for use even in lighting columns, garden lights with night operation capability.

    Technical analysis

    Solar charge controller for street light
    Dual timer function
    Battery type selection
    Full electronic protection
    Solar charge controller


    1. Intelligent system optimum controller
    2. High efficient series PWM charging with temperature compensation
    3. Compact size
    4. Use mosfet as electronic switch, without any mechanical switch
    5. Digital LED menu, only one key solve all setting simple
    6. Widely used, automatically recognize day / night
    7. Intelligent timer function with 1-15 hours option
    8. Unique dual timer function, enhance the flexibility of street light system.
    9. Gel, sealed and flooded battery type option
    10. Load status display
    11. Big terminals and big distance between terminals
    12. Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
    13. Reverse polarity protection: Any combination of solar module and battery
    14. Load work mode: Light on + dual timer, dusk to dawn, test, on / off
    Model LS2024R
    Rated Current 20A
    System Voltage 12 / 24V auto work
    Over Load Protection 1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds
    Short Circuit Protection 3.5 times of rated current
    Self-consumption Max. 6mA
    Working Temperature -35'C to + 55'Cindustrial
    Equalize Charging Voltage 14.6V; X2 / 24V
    Boost Charging Voltage 14.4V; X2 / 24V
    Float Charging Voltage 13.8V; X2 / 24V
    Boost Reconnect Charging Voltage 13.2V; X2 / 24V
    Temperature Compensation -30mV / 'C / 12V
    Under Voltage Warning Voltage 12.0V; X2 / 24V
    Low Voltage Disconnect Voltage 11.1V; X2 / 24V
    Low Voltage Reconnect Voltage 12.6V; X2 / 24V
    Terminals 10mm2
    Enclosure IP30

    Model LS2024R    

    Rated Current
    20A    

    System Voltage
    12 / 24V auto work

    Over Load Protection

    1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds

    Short Circuit Protection

    3.5 times of rated current

    Self-consumption

    Max. 6mA

    Working Temperature

    -35 ° C to + 55 ° C industrial

    Equalize Charging Voltage
    14.6V; x2 / 24V

    Boost Charging Voltage
    14.4V; x2 / 24V

    Float Charging Voltage
    13.8V; x2 / 24V

    Boost Reconnect Charging Voltage
    13.2V; x2 / 24V

    Temperature Compensation
    -30mV / ° C / 12V

    Under Voltage Warning Voltage
    12.0V; x2 / 24V

    Low Voltage Disconnect Voltage
    11.1V; x2 / 24V

    Low Voltage Reconnect Voltage
    12.6V; x2 / 24V

    terminals
    10 mm 2    

    Price without VAT
    IP30

    Out of stock

  • 6 PzS 930PB 2V Deep discharge SUNLIGHT battery 184.00 
    178.50  Excluding VAT
    221.34  Includes VAT

    6 PzS 930PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 930Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.

     

    Specifications  

    Electrical voltage 2
    Capacity (C5) 775 [AH]
    Length 198 [mm]
    Width 119 [mm]
    Height 713 [mm]
    Height with poles 740 [mm]
    Weight 50.500 [kg]
    Ind NO

    Applications

    In stock

  • -22%Limited
    Autonomous photovoltaic package for a holiday home. Photovoltaic system for refrigerator 12V / 45watt - 55 watts.
    Autonomous photovoltaic package 1.2kWh/24 hours-12v 599.00 
    465.00  Excluding VAT
    576.60  Includes VAT

    Autonomous photovoltaic package for a holiday home

    Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts

    Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter

    Available on backorder

  • -34%Limited
    5kW PPC Photovoltaics ECO
    410-WATT-420-WATT-Half-cell-perc-photovoltaic-net-metering
    5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation 7,280.00 
    4,800.00  Excluding VAT
    5,952.00  Includes VAT
    410-WATT-420-WATT-Half-cell-perc-photovoltaic-net-metering

    410-WATT-420-WATT-

    About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022

    5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here

    Available on backorder

  • -30%Limited
    Communication charge regulator cable CC-RS485B-RS485-150U 11.00 
    7.70  Excluding VAT
    9.55  Includes VAT

    Charging regulator cable Communication cable CC-RS485B-RS485-150U for charging regulators of Epsolar for Tracer Viewstar, VS Landstar, LS series Solar Charge Controller

    Price without VAT

    In stock

PWM Solar Charger 10A, charge regulator,

PWM Solar Charger 10A, charge regulator,

Regulator Programmable with night mode - PWM Solar Charger 10A, has a light sensor and timer, prices

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category