31.00 €Original price was: €31.00.25.00 €The current price is: €25.00. + VAT
ECOSUN ES-EXPERT CC2024 charge controller PWM 20A for 12V and 24V batteries, with automatic voltage recognition and full protections. Accepts panels up to ~216 W at 12V.
Ο ECOSUN ES-EXPERT CC2024 charge controller is a PWM 20A charge controller for 12V and 24V batteries. It recognizes the battery voltage on its own, charges it correctly and protects it. It is a Greek product of ECOSUN, with technical support and spare parts in the country.
When is the ECOSUN ES-EXPERT CC2024 charge controller enough?
PWM is the simple, cheap and very reliable solution for small autonomous systems: lighting, caravan, boat, pump, street lights. It has less to break and costs much less. Above 150-200W it is worth looking at MPPT controllers.
How many panels does it lift?
With 20A charging current, it accepts panels up to approximately 216 W in a 12V system or up to 432 W at 24V. Do not reach the limit: leave a margin of 20-25%, because a panel in cold and
On a clear day it gives more than its nominal power.
Specifications
Type: PWM
Charging current: 20A
System voltage: 12V / 24V, with automatic recognition
Maximum panel: ~216 W at 12V / ~432 W at 24V
Protections: overcharge, deep discharge, overcurrent, short circuit, reverse
polarity, overheating
Manufacturer: ECOSUN (Greece)
LOG IN
The order matters and is often wrong: first the battery to the regulator, after the
panels, lastly the loads. This is how the regulator reads the voltage and understands whether it is working at 12V or 24V.
On disconnection, vice versa. See also solar panels And the deep discharge batteries that match.
Common mistakes that burn regulators
Most problems are not regulator failure, they are installation problems. Three that we see all the time:
thin cable between regulator and battery, which heats up and drops the voltage; lack of safety in
positive of the battery, so a short circuit has nothing to stop it; and regulator closed in
box without ventilation, which constantly works in overheating and drops the charging current on its own. Give it
room to breathe and a cable of the correct cross-section and it will serve you for years.
40A digital programmable with multi-voltage control capability
Four-stage PL charging with algorithm that incorporates real-time pulse amplitude (PWM) constant voltage control gives you complete control of the entire charging cycle. All charging voltages and times are adjustable over a generously wide range.
Charging regulator cable Communication cable CC-RS485B-RS485-150U for charging regulators of Epsolar for Tracer Viewstar, VS Landstar, LS series Solar Charge Controller
ECOSUN ES-SIMPLE CC1524 charge controller PWM 15A for 12V and 24V batteries, with automatic voltage recognition and full protections. Accepts panels up to ~162 W at 12V.
ECOSUN ES-MPPT 40A charge controller MPPT 40A for 12V and 24V batteries, with automatic voltage recognition and full protections. Accepts panels up to ~432 W at 12V.
Reliable and high quality serial server compatible with all epsolar controllers and inverters. Connects via wifi to mobile / computer and communicates serially with devices, for remote control and operation.
Phocos-CM-04-1 17.00 €Original price was: €17.00.10.00 €The current price is: €10.00. + VAT
4A 12V / 24V -Solar Charge Controller
This CM 04 load regulator via Phocos is a small controller designed for an input current of up to 4A at 12V. The CM charge regulator is designed for use in small solar systems, as no disconnect load is required. The electronic circuit is equipped with a micro-controller that provides high-performance charging technology.
Charger Blue Power IP 67 fully protected: waterproof, with protection against vibration and ignition
The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.
Victron inverters developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. With the application of Hybrid HF Technology, these inverters succeed in successfully combining the highest degree of efficiency with the ability to support loads with high starting current without problems. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery (They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kwaveraged per year in Southern regions.
SMA IV SB 5.0-1AV-41 5000 W Photovoltaic Inverter Single Phase. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Charger Blue Power IP 67 fully protected: waterproof, with protection against vibration and ignition
The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.
All-in-one solar power solution The EasySolar combines an MPPT solar charge controller, an inverter / charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors.
Victron inverters developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. With the application of Hybrid HF Technology, these inverters succeed in successfully combining the highest degree of efficiency with the ability to support loads with high starting current without problems. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.
2v batteries RES 8-SOPzS 1380AH / C120 Sunlight, Greek-made deep discharge company are an economical and reliable solution for energy storage in small and medium autonomous PV systems. The maximum service life according to the manufacturer's specifications is 15 years (Design Life under Float Conditions)
Capacity:
1382Ah / C120
Dimensions: 198mm x 192mm x 613mm (Height 640 mm with poles). Weight 58.1 Kg
Victron Phoenix Inverter VE.Direct 48/250 - 48V Inverter 200W Pure Sine for Photovoltaics
Schuko 48V / 250VA inverters with pure sine wave output, high power and efficiency.
The combination of high frequency and linear frequency ensures the maximum possible benefit. nverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high performance and with high peak power at 400W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and lightweight. With the possibility of connection in parallel and three-phase device.
Specifications
Inverter off
Power (W)
200
Manufacturer
VictronEnergy
Input Voltage (V)
48V DC
Output Voltage (V)
230V AC +/- 3%
Performance level (%)
88
IP protection
IP21K
Weight (kg)
2.4
Warranty (years)
5
Other Information
ECO mode, Remote on / off, LED diagnosis, Dynamic cut off
To provide the best experience, we use technologies such as cookies to store and/or access device information. Consent to these technologies will allow us to process personal data such as browsing behavior or unique identifiers on this website. Non-consent or withdrawal of consent may adversely affect certain functions and features.
Functional
Always active
The technical storage or access is absolutely necessary for the legal purpose of the possibility of using a specific service that is explicitly requested by the subscriber or the user or for the sole purpose of transmitting communication through an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences not requested by the subscriber or user.
Tipsters
The technical storage or access used solely for statistical purposes.The technical storage or access used solely for anonymous statistical purposes. Without a summons, voluntary compliance by the Internet Service Provider, or additional third-party logging, the information stored or retrieved for this purpose on its own may not normally be used for your identification.
Marketing
Technical storage or access is required to create user profiles, to send advertisements or to register the user on a website or websites for similar marketing purposes.
