Victron Energy MultiPlus-II 24/3000 / 70-32 Inverter 3000W 24V

Victron Energy MultiPlus-II 24/3000 / 70-32 Inverter 3000W 24V

A MultiPlus, with ESS or Power Storage System functionality

Victron Energy MultiPlus-II 24/3000 / 70-32: The converter MultiPlus-II charger 24/3000 / 70-32 is a fully functional MultiPlus multifunction charger converter, as well as an optional external current sensor that extends PowerControl and PowerAssist functions up to 50A and 100A respectively. The MultiPlus-II is ideal for business use in the maritime sector, leisure navigation, offshore vehicles and land applications. It also has built-in anti-isla functionality and approvals in each country for use as ESS.

There are many possible system configurations. More detailed information can be found in the ESS System Design and Configuration Manual.

Powerassist

Victron Energy MultiPlus-II 24/3000 / 70-32 Inverter 3000W 24V Το MultiPlus-II can avoid overloading a limited AC source, such as a generator or socket. First, it will automatically reduce battery charge when, if not, an overload occurs. Second, it will need battery power to compensate for the power of the generator or electricity.

ESS and energy storage system

The MultiPlus-II is a key component of a Victron ESS system, offering the flexibility to combine it with MPPT solar chargers or network-connected FV converters. Examples and more detailed information can be found in the ESS Energy Storage System Manual.

Uninterruptible power supply UPS

Victron Energy MultiPlus-II 24/3000 / 70-32 Inverter 3000W 24V In the event of a power outage or disconnection of the socket or generator, the inverter integrated in the Multi automatically switches on and takes over the power supply for the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment continue to run without interruption.

Remote monitoring and control

Victron Energy MultiPlus-II 24/3000 / 70-32 Inverter 3000W 24V If combined with a GX device (eg Cerbo GX) you can monitor and control your Multi and your system or systems locally (LAN) or from Internet access from anywhere in the world with free VRM application and free VRM gateway. Access can be from a phone, tablet or computer with different operating systems. The control level has no limit, from the adjustment of the Multi to the automatic start of a backup generator and much more…

PowerControl and PowerAssist - increased network or generator capacity

Victron Energy MultiPlus-II 24/3000 / 70-32 Inverter 3000W 24V Maximum generator or mains current can be set. The MultiPlus-II will take into account the other AC charges and will use too much current to charge the battery, thus avoiding overloading the generator or mains (PowerControl function). PowerAssist takes the PowerControl principle into another dimension. When a power surge is required for a short period of time, as is often the case, the MultiPlus-II will compensate for the lack of power from the generator, socket or mains with a battery. When charging is reduced, excess power is used to recharge the battery.
Solar energy: AC power available even during a power outage

MultiPlus II can be used in photovoltaic systems, whether or not connected to the mains, and other alternative energy systems. It is compatible with both solar charge controllers and inverters connected to the mains.

Two AC outputs

The main output has the function "without interruption". Without interruption. MultiPlus II is responsible for providing interconnected loads in the event of a power failure or disconnection of the port / generator socket. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment continue to run without interruption. The second output is only active when the MultiPlus II Input has AC power. You can connect devices that do not need to discharge the battery to this outlet, such as a water heater.

Almost unlimited power thanks to the parallel and three-phase operation.

Up to 6 Multis can operate in parallel to achieve higher output power. Six 48/5000/70 units, for example, will give an output power of 25 kW / 30 kVA and a load capacity of 420 amps. In addition to the parallel connection, three units of the same model can be configured for three-phase output. But that's not all: up to 6 sets of three units can be connected in parallel to provide a 75kW / 90 kVA power converter with more than 1200 amps of capacity.

Configuration, monitoring and control of the on-site system

Settings can be changed in minutes with VEConfigure software (requires PC or laptop and MK3-USB interface). There are several monitoring and control options available: Color Control GX, Venus GX, Octo GX, CANvu GX, Laptop, Computer, bluetooth (with optional backpack VE. Smart Bus), Battery Monitor, Digital Multi Control Panel.