Solaredge SE POWER OPTIMIZER P950 optimizer for photovoltaics

72.00 
57.48  Excluding VAT
71.28  Includes VAT

Solaredge SE POWER OPTIMIZER P950 optimizer for photovoltaics. Suitable power optimizer for net metering, photovoltaics on roofs, home and professional photovoltaic systems.

Available on backorder

  ... people are viewing this right now

  Share

Solaredge SE POWER OPTIMIZER P950 optimizer for photovoltaics

Solaredge SE POWER OPTIMIZER P950 optimizer for photovoltaics: A complete solar system solution

Solaredge SE POWER OPTIMIZER P950 optimizer for photovoltaics: The SE POWER OPTIMIZER P950 power optimization box is a key component in SolarEdge solar panel system. The SolarEdge power optimization box collects and processes signals from solar panels, distributing them to whichever circuit sends the highest current. This unit is agnostic for solar panels and can be used with panels of any brand.

The SolarEdge power optimization box is connected to the solar panels via a photovoltaic string cable. The power optimization box connects to other SolarEdge components via an Ethernet cable (approx. 6 feet). Power optimizers also have a bifurcation attached to the bifurcation box at the back. The shunt provides power information sent to / from your home on SolarEdge

Easier to install and use

SolarEdge power optimization boxes are easy to install and use. The SolarEdge inverter box can be easily mounted on the ceiling, wall or floor. It has Wi-Fi connectivity and an LCD screen that displays solar information. Features of efficient energy converters

Efficient energy converters are manufactured by leading inverter manufacturers in the US, such as SolarEdge and Enphase. They use more efficient designs with small and lightweight components that reduce installation costs. Here is a look at the key features:

60% efficiency conversion

The SolarEdge inverter power optimization box helps to improve the efficiency of solar panels. It is able to convert 60% of the energy produced by solar panels into usable electricity, while the remaining 40% becomes heat. This means that homeowners using this system will be able to get more energy from their solar panels than they had before and reduce the amount of electricity they need to buy.

 

PRODUCT DETAILS

SE power optimizer P950, grid power optimizers, prices, purchase cost, offer, discounts, net-metering-photovoltaic

SE power optimizer P950, grid power optimizers, prices, purchase cost, offer, discounts, net-metering-photovoltaic

specifications

Power Optimizer Model (Typical Module Compatibility) P800p

(for 2 x 96-cell 5 '' PV modules)

P801

(for 2 x 72-cell PV modules)

P850

(for 2 x high power or bi-facial modules)

P950

(for 2 x high power or bi-facial modules)

INPUT
Rated Input DC Power (2) 800 800 850 950 W
Connection Method Dual input for independently connected (7) Single input for series connected modules
Absolute Maximum Input Voltage (Voc at lowest temperature) 83 125 vdc
MPPT Operating Range 12.5 – 83 12.5 – 105 vdc
Maximum Short Circuit Current per Input (Isc) 7 11.75 12.5 adc
Maximum Efficiency 99.5 %
Weighted Efficiency 98.6 %
Overvoltage Category II
OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER)
Maximum Output Current 18 15 18 adc
Maximum output voltage 85 vdc
OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF)
Safety Output Voltage for Power Optimizer 1 0.1 ± vdc
STANDARD COMPLIANCE
EMC FCC Part 15 Class B, IEC61000-6-2, IEC61000-6-3
Safety IEC62109-1 (class II safety)
RoHS Yes
Fire safety VDE-AR-E 2100-712: 2013-05
INSTALLATION SPECIFICATIONS
Compatible SolarEdge Inverters Three phase inverters SE16K & larger
Maximum Allowed System Voltage 1000 vdc
Dimensions (W x L x H) 129 x 168 x 59 / 5.1 x 6.61 x 2.32 129 x 153 x 49.5 / 5.1 x 6 x 1.9 129 x 162 x 59 / 5.1 x 6.4 x 2.32 mm

/ person

Weight 1064 / 2.3 933 / 2.1 1064 / 2.3 gr / lb
Input Connector MC4 (3)
Input Wire Length 0.16 / 0.52 0.16 / 0.52, 0.9 / 2.95 0.16 / 0.52, 0.9 / 2.95,

1.3 / 4.26, 1.6 / 5.24 (4)

0.16 / 0.52, 1.3 / 4.26, 1.6 /

5.24

m / ft
Output Connector MC4
 

Output Wire Length

Portrait Orientation: 1.2 / 3.9  

m / ft

Landscape Orientation: 1.8

/ 5.9

Landscape Orientation: 2.2 / 7.2
Operating Temperature Range (5) -40 to +85 / -40 to +185 ˚C / ˚F
Protection Rating IP68 / NEMA6P
Relative Humidity 0 – 100 %

 

How it works

The solar panels connected to the solar converter power optimization gearbox are monitored by a central monitoring system. This data is used to determine the amount of electricity each panel produces and gives homeowners real-time access to their energy use. The system also allows homeowners to control what happens to their panels, even if they are not at home. They can adjust the inverter to charge their batteries only when the sun is shining.

Monitor output voltage, power consumption, battery protection and other information 

The SOLAREDGE Inverter power optimization box is a display used to measure the output voltage of solar panels and the power consumed by electrical appliances. It also monitors battery protection and solar panel information. This device has an automatic function that will turn off the devices when the battery starts to drop, which maintains power and ensures safety. The LCD screen of this device displays a number of parameters in an organized way, such as the level of battery protection, input and output voltages, the power consumed by the devices, etc.

Solar energy is an evolving industry that produces clean, renewable energy. With the advancement of technology and the continuous improvement of performance, it is a worthwhile investment. To maximize the efficiency of your solar panels, use a solar panel converter power optimizer box from SOLAREDGE. This device will protect your panels from damage and ensure that you make the most of your system.

Most viewed products

Recently viewed products

  • -16%Limited
    Victron BlueSolar MPPT 100/50 - Charge Regulator 50A-MPPT for Photovoltaic-Wind Turbines 179.00 
    150.00  Excluding VAT
    186.00  Includes VAT

    Victron BlueSolar MPPT 100/50 - Charging Regulator 50A-MPPT for Photovoltaic-Wind Turbines

    Advanced finding of optimal power efficiency in case of partial shading
    Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.

    Specifications

    BlueSolar Charge controller MPPT 100/50
    Battery Voltage 12 / 24V auto select
    Rated charging current A 50
    Nominal PV Power, 12 V 1a), 1b) 700 W (MPPT range 15 V to 70 V resp. 95 V)
    Nominal PV Power, 24 V 1a), 1b) 1400 W (MPPT Bereich 30 V to 70 V bzw. 95V)
    Maximum PV open circuit voltage 100 V
    Peak efficiency 98%
    Self-consumption 10 mA
    Charge voltage 'absorption' 14,4 V / 28,8 V (adjustable)
    Charge voltage 'float' 13,8 V / 27,6 V (adjustable)
    Charge algorithm multi-stage adaptive
    Temperature compensation -16 mV / ° C resp. -32 mV / ° C
    Protection Battery reverse polarity (fuse) / Output short circuit / Over temperature
    Operating temperature -30 ° C to +60 ° C (full rated output up to 40 ° C)
    Humidity 95% non-condensing
    Data Communication Port VE.Direct

    Available on backorder

  • -20%Limited
    Victron Lithium Battery, Lithium SuperPack 25,6V/50Ah (M8)
    Battery Victron Lithium SuperPack 25,6V/50Ah (M8) 1,380.00 
    1,110.00  Excluding VAT
    1,376.40  Includes VAT

    Battery Victron Lithium SuperPack 25,6V/50Ah (M8)

    The Victron Lithium SuperPack 25,6V/50Ah battery is a Lithium battery for a large number of charge and discharge cycles for very long discharge depths.

    Available on backorder

  • -43%LimitedSOLD OUT
    450watt wind turbine 859.00 
    489.00  Excluding VAT
    606.36  Includes VAT

    Wind turbine 450 watt / 12v (16m / sec) or 350 watt / 12v (11m / sec) German Technology, low noise, low start 1.8 M / S and high efficiency.

    Includes cotroller.

    Price without VAT

     

     

    Out of stock

  • -27%Limited
    Victron Energy Phoenix Smart IP43 Charger 24/25 (1+1) 120-240V Battery Charger
    Victron Energy Phoenix Smart IP43 Charger 24/25 (1+1) 120-240V Battery Charger 579.48 
    425.00  Excluding VAT
    527.00  Includes VAT

    Victron Energy Phoenix Smart IP43 Charger 24/25 (1+1) 120-240V

    • Supports battery technologies (Wet, Mf , Vrla, Agm, Gel, Li-Ion)
    • It has Bluetooth to connect to the Victron Connect app
    • Short circuit, overload and overvoltage protections

    Available on backorder

  • -36%Limited
    Photovoltaic batteries, deep discharge lithium ion lifepo4 Motorhome - motorhome Lithium Battery ULS-12-150 AH Ultimatron LiFePO4 Lithium Battery 12.8V 150Ah / 1920 Wh
    Lithium Battery ULS-12-150 AH Ultimatron LiFePO4 Lithium Battery 12.8V 150Ah / 1920 Wh / with bluetooth and smart BMS with 5 YEAR warranty 1,389.00 
    885.00  Excluding VAT
    1,097.40  Includes VAT

    Performance Lithium Battery 1920Wh

    Lithium Battery ULS-12-150 AH Ultimatron LiFePO4 Lithium Battery 12.8V 150Ah with bluetooth and smart BMS with 5 YEAR warranty

    Minimum order 2 pieces. Delivery 4-6 days from France

  • -29%LimitedSOLD OUT
    5kW PPC Yingli Solar Photovoltaic with Installation 7,042.00 
    5,030.00  Excluding VAT
    6,237.20  Includes VAT

    5kw with photovoltaics on roofs with Yingli Solar 250 watts polycrystalline silicon

    It produces an average of 6500kw per year (for areas of Attica and south) εcovers an area of ​​35-40 square meters on a pergola or 60-80 square meters on a roof. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years. 

    Price without VAT

    Out of stock

  • -25%LimitedSOLD OUT
    Etatrack active 1500 2,576.00 
    1,932.00  Excluding VAT
    2,395.68  Includes VAT

    15 square meters covered area

    Price without VAT

     

    Out of stock

  • -23%LimitedSOLD OUT
    OBM ECOAGM 125Ah deep discharge battery 215.60 
    167.00  Excluding VAT
    207.08  Includes VAT

    BATTERY OBM ECOAGM A-125-12 125Ah 12V C100

    The 12V deep discharge batteries OBM ECOAGM 125AH are designed with AGM technology for use in UPS systems, security systems, alarms and fire safety systems, photovoltaic systems, autonomous power generation systems, electric elevator panels, emergency lighting, as well as for all uses that require backup power from a reliable
    accumulator.

    Dimensions:406 * 173 * 209mm
    Weight: 31.4kg

     

    A 2-year warranty is provided

    Price without VAT

     

    Out of stock

  • -27%Limited
    STUDER XTH 5000-24 4,648.00 
    3,399.00  Excluding VAT
    4,214.76  Includes VAT

    5000 VA 24 Vdc 230 Vac / 50 Hz with switching system and integrated 140A battery charger.

    Studer Xtender
    The Studer Xtender converter is the ideal solution for complex hybrid systems. It can be adapted and connected to PV panels, small wind turbines, diesel generators and even the public electricity grid, regardless of whether it operates as a single-phase or three-phase converter.

    Price without VAT

    Available on backorder

  • -19%LimitedSOLD OUT
    ecogel 100 ah ecosun GEL 100ah deep discharge battery for photovoltaic
    ecogel-100ah-battery-deep-cycle GEL photovoltaic batteries
    Deep discharge battery ECO SUN ECOGEL 100Ah, C-100/12V 192.00 
    154.90  Excluding VAT
    192.08  Includes VAT

    BATTERY OBM ECOGEL A-100 12 100 Ah 12V C100

    Deep discharge batteries OBM ECOGEL 100AH is a very reliable and quality battery solution for energy storage systems. The batteries OBM ECOGEL 100AH They provide maximum performance, resistance to overload and deep discharge while their construction is such that it provides them with high resistance to vibrations, vibrations and extreme weather phenomena.

    The 12V deep discharge batteries OBM ECOGEL 100AH are designed with technology GEL (JELL)  for use in UPS systems, security systems, alarms and fire safety systems, photovoltaic systems, autonomous power generation systems, electrical elevator panels, emergency lighting, as well as for all uses that require backup power from a reliable
    accumulator.

    Dimensions:260* 168 * 208mm
    Weight: 23.2kg

    A 2-year warranty is provided

    Price without VAT

    Out of stock

SE power optimizer P950, network optimizer for photovoltaics, prices,

SE power optimizer P950, network optimizer for photovoltaics, prices,

SE power optimizer P950, network optimizer for photovoltaics, prices, discounts, offers, technical data, net metering photovoltaics

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category