-
Victron Energy M6 eyelet connector (with 30A ATO fuse)
8.27 €
5.90 € Excluding VAT
7.32 € Includes VATVictron Energy M6 eyelet connector (with 30A ATO fuse).
Available on backorder
-
VE.Direct TX digital output cable (PWM light dimming cable)
11.00 €
7.00 € Excluding VAT
8.68 € Includes VATThis cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. So, theavailability of the lighting will increase even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct Connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED drivers.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older version can be updated for thisPrice without VAT
In stock
-
Victron Temperature sensor for BlueSolar PWM-Pro
12.00 €
8.00 € Excluding VAT
9.92 € Includes VATHeat sensor for the BlueSolar PWM-Pro.
Description
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.Price without VAT
Available on backorder
-
Temperature sensor for BlueSolar PWM-Pro
12.00 €
8.00 € Excluding VAT
9.92 € Includes VATHeat sensor for BlueSolar PWM-Pro charge regulators.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.The temperature sensor is compatible with the following Victron charge controllers:
SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445
SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445
SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445Delivery scope:
1x Victron Temperature Sensor for BlueSolar PWM-ProAvailable on backorder
-
BlueSolar PWM-Pro to USB interface cable
12.00 €
8.00 € Excluding VAT
9.92 € Includes VATWith the USB interface cable you can connect the BlueSolar PWM-Pro to your computer.
Available on backorder
-
Victron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics
19.00 €
16.00 € Excluding VAT
19.84 € Includes VATVictron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-5A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
SpecificationsManufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 5A Standby Self-Consumption 10mA Battery Voltage 12V, 24V Load Current max. 5A Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 5A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Inverting remote on-off cable
22.00 €
16.00 € Excluding VAT
19.84 € Includes VATUse this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output:
In stock
-
Non-inverting remote on-off cable
22.00 €
16.00 € Excluding VAT
19.84 € Includes VATVictron Non Inverting remote on-off cable
Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models.
Available on backorder
-
Cable for Smart BMS CL 12/100
18.43 €
17.43 € Excluding VAT
21.61 € Includes VATCable for Smart BMS CL 12/100
This cable for Smart BMS CL 12/100 connects between a non-VE.Bus BMS) and a MultiPlus ( MultiPlus, MultiPlus Compact or MultiPlus-II).
Available on backorder
-
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
22.00 €
19.00 € Excluding VAT
23.56 € Includes VATVictron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-10A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
Specifications
Charge Controller Type PWM System Voltage 12V, 24V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 10A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 10A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM PRO 12 / 24V-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
26.00 €
22.00 € Excluding VAT
27.28 € Includes VATVictron BlueSolar PWM PRO 12 / 24-5A - PWM Charging Regulator (12 / 24V) 5A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 5A Standby Self-Consumption 10mA Battery Voltage 12V, 24V Load Current max. 5A Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 5A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM-Light 12 / 24V-20A - PWM 20A Charging Regulator for Photovoltaics
29.00 €
24.50 € Excluding VAT
30.38 € Includes VATVictron BlueSolar PWM-Light 12 / 24V-20A - PWM 20A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Specifications
Charge Controller Type PWM System Voltage 12V, 24V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 20A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 20A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VATVictron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V, 24V Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines Permitted Humidity max. 98% (not condensing) IP Protection IP30 Charging Current max. 10A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 10A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Price without VAT
Available on backorder
-
Victron SmartSolar Pluggable Display
34.00 €
28.00 € Excluding VAT
34.72 € Includes VATVictron SmartSolar Pluggable Display
The SmartSolar Control display is a plug-in LCD display for SmartSolar charge controllers. Simply remove the rubber seal that protects the connector on the front of the controller and connect the display plug
Available on backorder
-
Victron BlueSolar PWM Charge Controller-LCD and USB 12 / 24V / 5A 5A charge regulator
35.00 €
29.00 € Excluding VAT
35.96 € Includes VATVictron BlueSolar PWM Charge Controller-LCD and USB 12 / 24V / 5A Solar Charge Controller 5A Digital with Liquid Crystal Display for Photovoltaic Panels
Available on backorder
-
Skylla-i remote on-off cable
35.00 €
29.50 € Excluding VAT
36.58 € Includes VATVictron Skylla-i remote on-off cable
Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged.
This cable is intended for on / off control of the Skylla-i when the source is high when the Skylla-i must be on, and low or free floating when the Skylla-i must be off.
Specifications:
Maximum input voltage: 70V
Minimum input voltage needed for switching on: Approx. 6V
Switch off level: Input voltage must be less than 1V or must be free floating
In stock
-
VE.Direct M8 Cable BNC male – BNC female
38.44 €
31.66 € Excluding VAT
39.26 € Includes VATVE.Direct M8 Cable BNC male – BNC female
This VE.Direct M8 Cable BNC male – BNC female can be used to extend the cables between a Smart Battery Lithium and the BMS.
Available on backorder
-
Victron Energy Current Transformer 100A:50mA for MultiPlus-II (1 m)
55.04 €
33.00 € Excluding VAT
40.92 € Includes VATWhat are Victron products?
The products for autonomous energy systems of the Dutch VICTRON ENERGY are characterized by the highest possible reliability in difficult applications. VICTRON ENERGY has the right products even for critical applications in the field of fire and ambulance vehicles where the reliability of the autonomous energy system is of critical importance, since correct operation can be a matter of life and death.
Available on backorder
-
Victron Energy Battery Charger IP65 Charger 6V / 12V-1,1A
43.21 €
33.84 € Excluding VAT
41.96 € Includes VATVictron Energy Battery Charger IP65 Charger 6V / 12V-1,1A. This charger is designed to charge a wide variety of car, motorcycle, battery and battery chargers.
alarms etc. of various types such as starter batteries (closed and open type), GEL type batteries as well as AGM batteries. It can charge and maintain batteries from 1,2AH to 120AH. Available on backorder
-
VE.Bus BMS to BMS 12-200 alternator control cable
36.00 €
35.00 € Excluding VAT
43.40 € Includes VATVictron VE.Bus BMS to BMS 12-200 alternator control cable
With this cable, the charge control function of the BMS 12/200 can be used together with the VE.Bus BMS.
Available on backorder
-
Remote panel for bluesolar duo
44.00 €
37.00 € Excluding VAT
45.88 € Includes VATPWM controller
Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
Programmable charging current ratio (normal setting: equal current for both batteries)
Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
Internal heat sensor and optional remote control heat sensor
It is protected from overvoltage
It is protected against short circuits
It is protected from reverse polarity of photovoltaic panels and / or batteries.
BlueSolar 12 / 24-10 with timer 10A to 12V or 24VPrice without VAT
Available on backorder
-
Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics
44.00 €
37.00 € Excluding VAT
45.88 € Includes VATVictron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics
Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.
Specifications :
- Battery Voltage: 12 / 24V (Automatic selection)
- Night mode (details in the Remote Panel manual)
- Rated charging current: 30 A
- Second battery output: not available
- Automatic load disconnection: Yes (maximum load 30A)
- Maximum input voltage of PV panel: 28V / 55V
- Self-consumption: <10mA
- Protection: battery reverse polarity, short circuit, overheating
- Operating temperature range -20 to +50 C
- Absorption charge (default): 14.4V (12V) / 28.8V (24V)
- Float charge (default): 13.8V (12V) / 27.6V (24V)
- Equalization charge (default): 14.6V (12V) / 29.2V (24V)
- Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
- Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
- Protection class (dust-humidity): IP 30
- Dimensions: 138x70x37 mm
- Warranty: 5 Years
Available on backorder
-
Remote panel for BlueSolar PWM-Pro
44.00 €
37.00 € Excluding VAT
45.88 € Includes VATDevice for monitoring photovoltaic systems
Programmable The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable: - With the help of a computer and software - With the dedicated BlueSolar Pro Remote Panel (see features below).
General characteristics
- Lighting control function, fully programmable.
- Three stage battery charging (bulk, absorption, float), fully programmable. -
- Integrated battery monitor function (Remote Panel needed to display state of charge).
- Load output with low voltage disconnect and manual control (default setting).
- Optional external temperature sensor. -
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and / or battery.
- Day / night timing options See Remote Panel manual for details
Price without VAT
Available on backorder
-
Victron Energy Battery Charger IP65 Charger 12V / 4A-12V / 0,8A
49.54 €
38.95 € Excluding VAT
48.30 € Includes VATVictron Energy Battery Charger IP65 Charger 12V / 4A-12V / 0,8A. Automatic charger - maintenance Automotive IP65 Charger 12V / 4A-12V / 0,8A, constant current and constant voltage with 5 years warranty. It has an automatic restart with low battery voltage and 3 charging stages with 3 different options. Suitable for any type of battery (Wet, Mf, Vrla, Agm, Gel) in cars, motorcycles and yachts.
Available on backorder
-
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines
48.00 €
41.00 € Excluding VAT
50.84 € Includes VATVictron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type MPPT Power (W) 145 (12V) / 290 (24V) Manufacturer VictronEnergy Input voltage (V) 75 Output Voltage (V) 12/24 IP Protection IP43 (electronic components), IP22 (connection area) Weight (kg) 0.5 Warranty (years) 5 years Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct Available on backorder
-
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VATVictron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V, 24V Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines Permitted Humidity max. 98% (not condensing) IP Protection IP30 Charging Current max. 20A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 20A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
57.00 €
48.00 € Excluding VAT
59.52 € Includes VATVictron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 48V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 20A Standby Self-Consumption 10mA Max. Voltage Solar Module 100V Max. Current Solar Module 20A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
63.00 €
49.00 € Excluding VAT
60.76 € Includes VATVictron BlueSolar PWM Light 48V / 10A - PWM 10A Charging Regulator for Photovoltaics
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 48V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 10A Standby Self-Consumption 10mA Max. Voltage Solar Module 100V Max. Current Solar Module 10A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron Blue Smart IP65 Charger 6V/12V-1.1 + DC connector Battery Charger
68.54 €
54.27 € Excluding VAT
67.29 € Includes VATVictron Blue Smart IP65 Charger 6V/12V-1.1 + DC connector Battery Charger
New professional battery charger with built-in Bluetooth. The Blue Smart IP65 charger can be used on devices in your lab and in motorized vehicles such as cars, motorbikes, boats and caravans
Available on backorder
-
Victron BlueSolar PWM Charge Controller-LCD and USB 12 / 24V / 30A 30A charge regulator
65.00 €
55.00 € Excluding VAT
68.20 € Includes VATVictron BlueSolar PWM Charge Controller-LCD and USB 12 / 24V / 30A Solar Charge Controller 30A Digital with Liquid Crystal Display for Photovoltaic Panels
Available on backorder
-
Victron BlueSolar PWM Light 48V / 30A - PWM 30A Charging Regulator for Photovoltaics
66.00 €
56.00 € Excluding VAT
69.44 € Includes VATVictron BlueSolar PWM Light 48V-30A - PWM 30A Charging Regulator for Photovoltaics
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 48V Permitted Humidity max. 95% RF (not condensing) IP Protection IP20 Charging Current max. 30A Standby Self-Consumption 10mA Max. Voltage Solar Module 100V Max. Current Solar Module 30A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Available on backorder
-
Victron SmartSolar MPPT 75/10 - 10A Photovoltaic Charging Regulator
66.00 €
56.00 € Excluding VAT
69.44 € Includes VATVictron SmartSolar MPPT 75/10 - 10A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
Model No. MPPT 75/10 MPPT 75/15 MPPT 100/15 MPPT 100/20 Electrical data Max. Solar Input Power 145 / 290 W 220 / 440 W 220 / 440 W 290 / 580 W Max. Solar Panel Open Circuit Voltage 75 V 75 V 100 V 100 V Max. Solar Panel Short Circuit Current A 13 A 15 A 15 A 20 Nominal System (Battery) Voltage 12 / 24 V 12 / 24 V 12 / 24 V 12 / 24 V Self-Consumption 10 mA 10 mA 10 mA 10 mA Peak Conversion Efficiency 98.00% 98.00% 98.00% 98.00% Available on backorder
-
Victron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
66.00 €
56.00 € Excluding VAT
69.44 € Includes VATVictron BlueSolar MPPT 100/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast maximum power efficiency (MPPT) detection. Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
SpecificationsType MPPT Power (W) 220 (12V) / 440 (24V) Manufacturer VictronEnergy Input voltage (V) 100 Output Voltage (V) 12/24 IP Protection IP43 (electronic components), IP22 (connection area) Weight (kg) 0.5 Warranty (years) 5 years Other Information Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct Available on backorder
-
Victron SmartSolar MPPT 75/15 - 15A Photovoltaic Charging Regulator
72.00 €
61.00 € Excluding VAT
75.64 € Includes VATVictron SmartSolar MPPT 75/15 - 15A Photovoltaic Charging Regulator
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Specifications
Model No. MPPT 75/10 MPPT 75/15 MPPT 100/15 MPPT 100/20 Electrical data Max. Solar Input Power 145 / 290 W 220 / 440 W 220 / 440 W 290 / 580 W Max. Solar Panel Open Circuit Voltage 75 V 75 V 100 V 100 V Max. Solar Panel Short Circuit Current A 13 A 15 A 15 A 20 Nominal System (Battery) Voltage 12 / 24 V 12 / 24 V 12 / 24 V 12 / 24 V Self-Consumption 10 mA 10 mA 10 mA 10 mA Peak Conversion Efficiency 98.00% 98.00% 98.00% 98.00% Available on backorder
-
Epsolar XTRA 1210N XDS2 MPPT 24V 10A Charge Controller
83.00 €
64.00 € Excluding VAT
79.36 € Includes VATEpsolar XTRA 1210N XDS2 MPPT 24V 10A Charge Controller
Epsolar charger suitable for installations up to 10A at 24V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance
Available on backorder
-
Victron Energy Current Transformer 100A:50mA for MultiPlus-II (20 m)
112.16 €
67.00 € Excluding VAT
83.08 € Includes VATWhat are Victron products?
The products for autonomous energy systems of the Dutch VICTRON ENERGY are characterized by the highest possible reliability in difficult applications. VICTRON ENERGY has the right products even for critical applications in the field of fire and ambulance vehicles where the reliability of the autonomous energy system is of critical importance, since correct operation can be a matter of life and death.
Available on backorder
-
Epsolar XTRA 2206N MPPT 24V 20A Charge Controller
83.23 €
67.00 € Excluding VAT
83.08 € Includes VATEpsolar XTRA 2206N MPPT 24V 20A Charge Controller
MPPT charge controllers from EPsolar are suitable for all polycrystalline and monocrystalline type panels. The built-in screen they have allows you to see all the indications of your system and thanks to the algorithm for detecting the maximum power point of the photovoltaics, it maximizes the efficiency of your system by 30%.
Available on backorder
-
Victron MPPT Control (VE.Direct cable not included)
86.00 €
68.00 € Excluding VAT
84.32 € Includes VATVictron MPPT Control (VE.Direct cable not included)
MPPT Control allows you to view the status and configuration of all BlueSolar MPPT charge controllers that have a VE.Direct communication port. The MPPT Control is housed in the already familiar BMV-700 series housing, maintaining a consistent and professional appearance to your panels and system monitoring equipment.
Available on backorder
-
Victron -Blue Smart IP65s Charger 12/4 + DC connector Battery Charger
86.43 €
68.70 € Excluding VAT
85.19 € Includes VATVictron -Blue Smart IP65s Charger 12/4 + DC connector Battery Charger. With Bluetooth enabled, you can monitor the charger and set alarms directly from your phone
Available on backorder
-
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VATVictron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
Manufacturer VictronEnergy Charge Controller Type PWM System Voltage 12V, 24V Connectivity Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines Permitted Humidity max. 98% (not condensing) IP Protection IP30 Charging Current max. 30A Standby Self-Consumption 10mA Max. Voltage Solar Module 28V / 55V Max. Current Solar Module 30A Number of Charging Outputs 1 Ambient Temperature -20 ° C - + 50 ° C Supported Battery Types Bleisäure, AGM, Gel Available on backorder
-
Victron SmartSolar MPPT 100/15 - 15A Photovoltaic Charging Regulator
84.00 €
71.00 € Excluding VAT
88.04 € Includes VATVictron SmartSolar MPPT 100/15 - Charging Regulator
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Specifications
Model No. MPPT 75/10 MPPT 75/15 MPPT 100/15 MPPT 100/20 Electrical data Max. Solar Input Power 145 / 290 W 220 / 440 W 220 / 440 W 290 / 580 W Max. Solar Panel Open Circuit Voltage 75 V 75 V 100 V 100 V Max. Solar Panel Short Circuit Current A 13 A 15 A 15 A 20 Nominal System (Battery) Voltage 12 / 24 V 12 / 24 V 12 / 24 V 12 / 24 V Self-Consumption 10 mA 10 mA 10 mA 10 mA Peak Conversion Efficiency 98.00% 98.00% 98.00% 98.00% Available on backorder
-
Victron -Blue Smart IP65s Charger 12/5 + DC connector Battery Charger
90.35 €
71.86 € Excluding VAT
89.11 € Includes VATVictron -Blue Smart IP65s Charger 12/5 + DC connector Battery Charger. With Bluetooth enabled, you can monitor the charger and set alarms directly from your phone
Available on backorder
-
Victron Blue Solar MPPT 75/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
94.00 €
74.00 € Excluding VAT
91.76 € Includes VATVictron Blue Solar MPPT 75/15 - Charging Regulator 15A-MPPT for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Specifications
Model Victron BlueSolar MPPT 75/15 Part# SCC010015050R battery voltage 12/24 volt auto select Rated charging current 15A Maximum PV power, 12V (a, b) 200 W (MPPT range 15V to 70V resp. 95V) Maximum PV power, 24V (a, b) 400 W (MPPT range 30V to 70V resp. 95V) Automatic load disconnect Yes, maximum load 15A Maximum PV open circuit voltage 75V Peak efficiency 98% Self consumption 10mA Charge voltage 'absorption' 14.4V / 28.8V Charge voltage 'float' 13.8V / 27.6V Charge algorithm Multi-stage adaptive Temperature compensation -16 mV / ° C resp. -32 mV / ° C Continuous / peak load current 15A / 50A Low voltage load disconnect 11.1V / 22.2V or 11.8V / 23.6V or BatteryLife algorithm Low voltage load reconnect 13.1V / 26.2V or 14V / 28V or BatteryLife algorithm Available on backorder
-
Victron Blue Smart IP65s Charger 12/4 + DC connector Battery Charger
93.47 €
74.37 € Excluding VAT
92.22 € Includes VATVictron Blue Smart IP65s Charger 12/4 + DC connector Battery Charger
New professional battery charger with built-in Bluetooth. The Blue Smart IP65 charger can be used on devices in your lab and in motorized vehicles such as cars, motorbikes, boats and caravans
Available on backorder
-
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A
91.00 €
76.00 € Excluding VAT
94.24 € Includes VATCharging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
- PWM controller
- Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
- Programmable charging current ratio (normal setting: equal current for both batteries)
- Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
- Internal heat sensor and optional remote control heat sensor
- It is protected from overvoltage
- It is protected against short circuits
- It is protected from reverse polarity of photovoltaic panels and / or batteries.
Price without VAT
Out of stock
-
Epsolar XTRA 2210N MPPT 24V 20A Charge Controller
105.91 €
76.00 € Excluding VAT
94.24 € Includes VATEpsolar XTRA 2210N MPPT 24V 20A Charge Controller
MPPT charge controllers from EPsolar are suitable for all polycrystalline and monocrystalline type panels. The built-in screen they have allows you to see all the indications of your system and thanks to the algorithm for detecting the maximum power point of the photovoltaics, it maximizes the efficiency of your system by 30%.
Available on backorder
-
Epsolar DuoRacer MPPT 24V 20A Charge Controller
93.80 €
76.00 € Excluding VAT
94.24 € Includes VATEpsolar DuoRacer MPPT 24V 20A Charge Controller
12/24V MPPT Charge Controller for 2 batteries, with maximum power point detection technology with super fast tracking speed and 99,5% guaranteed tracking efficiency.
Available on backorder
-
Epsolar Tracer 2210A MPPT 24V 20A Charge Controller
135.90 €
77.00 € Excluding VAT
95.48 € Includes VATEpsolar Tracer 2210A MPPT 24V 20A Charge Controller
Epsolar charger suitable for installations up to 20A at 24V. This is MPPT type.
Out of stock
-
Blue Power Charger 24/8 IP20 (1)
94.00 €
79.00 € Excluding VAT
97.96 € Includes VATThe highest efficiency ever!
- Setting a new industry standard: with 93% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 4-stage charge algorithm: bulk - absorption - float - storage
- The Blue Power charger features a microprocessor controlled 'adaptive' battery management. The 'adaptive' feature will automatically optimize the charging process relative to the way the battery is being used.
Less maintenance and aging when the battery is not in use: the Storage Mode
- The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V / cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to 'equalize' the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Totally silent
- Models up to 12/15: no fan.
Protected against overheating
- Output current will reduce as temperature increases up to 60 ° C, but the Blue Power charger will not fail.
Two LED's for status indication
- Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off) Green LED: power on
Available on backorder
-
Victron VE.BUS Smart dongle
102.00 €
81.00 € Excluding VAT
100.44 € Includes VATWhat are Victron products?
The products for autonomous energy systems of the Dutch VICTRON ENERGY are characterized by the highest possible reliability in difficult applications. VICTRON ENERGY has the right products even for critical applications in the field of fire and ambulance vehicles where the reliability of the autonomous energy system is of critical importance, since correct operation can be a matter of life and death.
Available on backorder
-
Victron SmartSolar MPPT 100/20 - 20A Photovoltaic Charging Regulator
97.00 €
82.00 € Excluding VAT
101.68 € Includes VATVictron SmartSolar MPPT 100/20 - 20A Photovoltaic Charging Regulator
Victron charge controller, which has built-in Bluetooth to connect as well as a socket so you can place a display and configuration screen. In the case of cloudy skies, when the light is constantly changing, it will improve energy efficiency by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
With the BatteryLife system an intelligent battery management system and electronic components protected by resin, protecting them from environmental conditions.
Specifications
Model No. MPPT 75/10 MPPT 75/15 MPPT 100/15 MPPT 100/20 Electrical data Max. Solar Input Power 145 / 290 W 220 / 440 W 220 / 440 W 290 / 580 W Max. Solar Panel Open Circuit Voltage 75 V 75 V 100 V 100 V Max. Solar Panel Short Circuit Current A 13 A 15 A 15 A 20 Nominal System (Battery) Voltage 12 / 24 V 12 / 24 V 12 / 24 V 12 / 24 V Self-Consumption 10 mA 10 mA 10 mA 10 mA Peak Conversion Efficiency 98.00% 98.00% 98.00% 98.00% Available on backorder
-
Victron SmartSolar MPPT 100/20 (up to 48V) – MPPT Charge Controller 20A Photovoltaics
99.00 €
82.00 € Excluding VAT
101.68 € Includes VATVictron SmartSolar MPPT 100/20 (up to 48V) – MPPT Charge Controller 20A Photovoltaics
Using the newest and fastest technology, SmartSolar maximizes energy harvesting and intelligently directs it to achieve full charge in the shortest possible time.
Available on backorder
-
Victron Blue Smart IP65s Charger 12/5 + DC connector Battery Charger
110.00 €
82.75 € Excluding VAT
102.61 € Includes VATVictron Blue Smart IP65s Charger 12/5 + DC connector Battery Charger
New professional battery charger with built-in Bluetooth. The Blue Smart IP65 charger can be used on devices in your lab and in motorized vehicles such as cars, motorbikes, boats and caravans
Available on backorder
-
Victron Phoenix 24/250 VE.Direct Schuko * - 24V Pure Sine Inverter 200W for Photovoltaics
105.00 €
83.00 € Excluding VAT
102.92 € Includes VATVictron Phoenix 24/250 VE.Direct Schuko - 24V Pure Sine Inverter 200W for Photovoltaics
Inverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Victron Phoenix 24/250 converter - inverter 24VDC - 250VAC 50Hz - 200W, pure sine with maximum power 350W. With VE.Direct connection, possibility of stopping operation in case of low battery voltage and ECO mode. Suitable for a wide range of applications, able to provide power, without problems, to any load.
Excellent professional quality compact and lightweight.Specifications
Inverter off Power (W) 200 Manufacturer VictronEnergy Input Voltage (V) 24V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 88 IP protection IP21 Weight (kg) 2.4 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Out of stock
-
Blue Power IP22 Charger 24/8 Battery Charger 1 'Output
101.00 €
85.00 € Excluding VAT
105.40 € Includes VATWith up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Available on backorder
-
Victron Energy-Phoenix 24/180
133.00 €
86.00 € Excluding VAT
106.64 € Includes VATThe Victron Energy-Phoenix 24/180 (180 watt 24 Volt) converter ensures pure sine efficiency, high peak power and high efficiency. The combination of high frequency and linear frequency ensures the greatest possible benefit.
Price without VAT
Out of stock
-
Victron Energy-Phoenix 12/180
133.00 €
86.00 € Excluding VAT
106.64 € Includes VATΟ Victron Energy-Phoenix 24/180 has: 180 watts 24 Volt Ensures pure sine wave performance, high peak power and high efficiency. The combination of high frequency and linear frequency ensures the greatest possible benefit. Input Voltage: 21V - 31V DC Continuous output power: 180VA at 25 ° C Continuous power: 175W / 150W at 25 ° C / 40 ° C Starting power: 350W Maximum Efficiency: 88% Cooling: with free ventilation and fan (fan) Protection : output short circuit, overload, low battery voltage, overheating Output: 120V / 50Hz / 60Hz SinusMax. Advanced technology. Developed for professional use, the Phoenix range of converters is suitable for a wide range of applications. The result is a top quality product with compact dimensions. No compromises on performance. It has as its Philosophy the highest quality standards and the decades of experience in the development of innovative constructions that make this possible. With a special compact design that ensures stability, through a user arm. Easy to use and easy to install. Suitable for a variety of applications. Available with easy grip on the move relaxed for the operator.
Price without VAT
Out of stock
-
Phoenix 48/250 VE.Direct NEMA 5-15R
139.00 €
87.00 € Excluding VAT
107.88 € Includes VATThe Victron Phoenix 48/250 VE.Direct (MPN PIN482510200) is a small sinusoidal inverter with a constant output of 200W. Converts 48V DC to 230V AC with pure sine wave, suitable for supply even to sensitive electronic devices. Its level of performance is very high and thanks to the integrated Eco-Mode function one of the best in this category.
Through the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone that allows the configuration of various system parameters, such as the switch on and off the voltage at low battery charge. Other settings such as output frequency or voltage, as well as a bipolar contact-alarm are just some of the features of this converter.
Price without VAT
Available on backorder
-
Phoenix 24/250 VE.Direct NEMA 5-15R
113.00 €
87.00 € Excluding VAT
107.88 € Includes VATThe small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
-
Phoenix 12/250 VE.Direct NEMA 5-15R
113.00 €
87.00 € Excluding VAT
107.88 € Includes VATThe small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
-
Victron Phoenix Inverter 48/250 VE.Direct Schuko * - 48V Inverter 200W Pure Sine for Photovoltaics
118.00 €
87.00 € Excluding VAT
107.88 € Includes VATVictron Phoenix Inverter VE.Direct 48/250 - 48V Inverter 200W Pure Sine for Photovoltaics
Schuko 48V / 250VA inverters with pure sine wave output, high power and efficiency.
The combination of high frequency and linear frequency ensures the maximum possible benefit. nverter (inverter) Victron of Dutch origin, for autonomous systems (photovoltaic, wind, hybrid). Pure sine, high performance and with high peak power at 400W. Suitable for a wide range of applications, capable of providing power, without problems, to any load. Excellent professional quality compact and lightweight. With the possibility of connection in parallel and three-phase device.Specifications
Inverter off Power (W) 200 Manufacturer VictronEnergy Input Voltage (V) 48V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 88 IP protection IP21 Weight (kg) 2.4 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Available on backorder
-
Pure Sine Inverter Victron Phoenix VE.Direct 12/250
118.00 €
87.00 € Excluding VAT
107.88 € Includes VATThe small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Price without VAT
Available on backorder
-
Battery Charger Blue Power IP22 Charger 24/8 - 3 Outputs
104.00 €
87.00 € Excluding VAT
107.88 € Includes VATAt efficiencies of up to 94%, the heat loss of these chargers is three to four times lower than that of
industry specifications. And once the battery is fully charged, the power consumption is reduced below 0.5 Watt, a value of about
five to ten times lower than the industry specification values.Available on backorder
-
Victron Phoenix 12/250 VE.Direct Schuko * - Pure Sine Inverter 200W for Photovoltaics
100.00 €
87.00 € Excluding VAT
107.88 € Includes VATVictron Phoenix 12/250 VE.Direct Schuko * - Inverter - Clean Halftone Converter 200W for Photovoltaics
Victron Phoenix 12/250 converter - inverter 12VDC - 230VAC 50Hz - 250VA, pure sine with a maximum power of 400W. With VE.Direct connection, possibility of shutdown in case of low battery voltage and ECO mode.
Specifications
Power (W) 200 Manufacturer VictronEnergy Input Voltage (V) 12V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 87 IP protection IP21 Weight (kg) 2.4 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Available on backorder
-
Phoenix 48/250 VE.Direct Schuko * - Pure Sine Inverter 200W for Photovoltaics
128.00 €
87.00 € Excluding VAT
107.88 € Includes VATPhoenix 48/250 VE.Direct Schuko * - Pure Sine Inverter 200W for Photovoltaics
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software.
Specifications
Inverter off Power (W) 200 Manufacturer VictronEnergy Input Voltage (V) 48V DC Output Voltage (V) 230V AC +/- 3% Performance level (%) 88 IP protection IP21 Weight (kg) 2.4 Warranty (years) 5 Other Information ECO mode, Remote on / off, LED diagnosis, Dynamic cut off Available on backorder
-
Victron Energy Phoenix 12/250 -15 IEC Photovoltaic Inverter
108.00 €
87.00 € Excluding VAT
107.88 € Includes VATVictron Energy Phoenix 12/250
Victron Energy single-phase inverter 250W with pure sine output. It converts direct current (DC) 12V to alternating current (AC) of one phase and allows the powering of electrical and electronic devices from batteries and vehicles. All appliances powered by a pure sine wave inverter will operate to their full specifications.
Available on backorder
-
Victron Energy Phoenix 24/250-10 IEC / VE Photovoltaic Inverter
108.00 €
87.00 € Excluding VAT
107.88 € Includes VATWhat is a Victron Phoenix inverter?
The Victron Phoenix Inverter is a multi-purpose inverter designed for stand-alone PV systems. It can be used to power DC loads such as lights and motors, or AC loads such as refrigerators and air conditioners. The Victron Phoenix Inverter is also equipped with an integrated charger, making it ideal for backup power applications.
Available on backorder
-
Epsolar TracerA 3210A MPPT 24V 30A Charge Controller
179.80 €
87.70 € Excluding VAT
108.75 € Includes VATEpsolar TracerA 3210A MPPT 24V 30A Charge Controller
Epsolar charger suitable for installations up to 30A at 24V. This is MPPT type.
Out of stock
-
Battery Charger Blue Smart IP67 Charger 12/7 (1 Output)
105.00 €
88.00 € Excluding VAT
109.12 € Includes VATCharger with built-in Bluetooth for communication and settings through your mobile. With up to 94% efficiency, the heat loss of these top chargers is three to four times lower than the specifications of similar chargers on the market. In addition, the battery is fully charged, power consumption is reduced below 0.5 Watt, a price about five to ten times lower than the specifications of the corresponding chargers on the market.
Price without VAT
Available on backorder
-
Blue Power IP67 Charger 12/7 Battery Charger (1 'Output)
105.00 €
88.00 € Excluding VAT
109.12 € Includes VATCharger Blue Power IP 67 fully protected: waterproof, with protection against vibration and ignition
The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.Price without VAT
-
Blue Power 12/7 IP65 Waterproof (1)
105.00 €
88.70 € Excluding VAT
109.99 € Includes VATp>Blue Power IP67 Charger ccompletely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Power IP67 Charger. The casing is made of cast aluminum and the electronics are molded in resin.Start interrupt
The models with suffix (1 + Si) feature a second current limited output which is always powered as long as 180 - 265 VAC is present on the input. This output can for example be used to prevent starting of a vehicle before unplugging the battery charger (start interrupt function).
1 output. With NEMA 5-15R plugAvailable on backorder
-
Victron Energy -Blue Smart IP67 Charger 12/7 (1) Battery Charger
113.80 €
90.77 € Excluding VAT
112.55 € Includes VATVictron Energy -Blue Smart IP67 Charger 12/7 (1) Battery Charger. Charger with built-in Bluetooth for communication and settings from your mobile. With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications.
Available on backorder
-
Victron Energy -Blue Smart IP67 Charger 24/5 (1) Battery Charger
113.83 €
90.79 € Excluding VAT
112.58 € Includes VATVictron Energy -Blue Smart IP67 Charger 24/5 (1) Battery Charger. Charger with built-in Bluetooth for communication and settings from your mobile. With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications.
Available on backorder
-
Battery Charger Blue Smart IP67 Charger 24/5 (1 'Output)
118.00 €
91.00 € Excluding VAT
112.84 € Includes VATCharger with built-in Bluetooth for communication and settings through your mobile. With up to 94% efficiency, the heat loss of these top chargers is three to four times lower than the specifications of similar chargers on the market. In addition, the battery is fully charged, power consumption is reduced below 0.5 Watt, a price about five to ten times lower than the specifications of the corresponding chargers on the market.
Price without VAT
Available on backorder
-
Blue Power Charger 12/7 IP20 (1)
110.00 €
93.00 € Excluding VAT
115.32 € Includes VAT- Setting a new industry standard: with 93% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 4-stage charge algorithm: bulk - absorption - float - storage
- The Blue Power charger features a microprocessor controlled 'adaptive' battery management. The 'adaptive' feature will automatically optimize the charging process relative to the way the battery is being used.
Less maintenance and aging when the battery is not in use: the Storage Mode
Available on backorder
-
Interface device BMV-60XS IVI VIC
122.00 €
94.00 € Excluding VAT
116.56 € Includes VATInterface device with Data logger and Ethernet remote control system.
Price without VAT
Available on backorder
-
Victron -Blue Smart IP65 Charger 12/7 + DC connector Battery Charger
119.10 €
95.04 € Excluding VAT
117.85 € Includes VATVictron -Blue Smart IP65 Charger 12/7 + DC connector Battery Charger. With Bluetooth enabled, you can monitor the charger and set alarms directly from your phone
Available on backorder
-
Victron -Blue Smart IP65 Charger 24/5 + DC connector Battery Charger
119.10 €
95.04 € Excluding VAT
117.85 € Includes VATVictron -Blue Smart IP65 Charger 24/5 + DC connector Battery Charger. With Bluetooth enabled, you can monitor the charger and set alarms directly from your phone.
Available on backorder
-
Epsolar Epever MSC-3210N MPPT 24V 30A Charge Controller
126.29 €
97.00 € Excluding VAT
120.28 € Includes VATEpsolar Epever MSC-3210N MPPT 24V 30A Charge Controller
Epsolar charger suitable for installations up to 30A at 24V. This is MPPT type. MPPT Charge Controllers determine the appropriate charge levels of the batteries providing little loss in their actual performance.
Available on backorder
-
Victron Energy Blue Smart IP67 Charger 24/5 (1) Battery Charger
128.77 €
98.19 € Excluding VAT
121.76 € Includes VATVictron Energy Blue Smart IP67 Charger 24/5(1) Battery Charger
Suitable for any type of battery (Wet, Mf, Vrla, Agm, Gel, Li-Ion). It has Bluetooth functionality to connect to the Victron Connect smartphone app.
- Input voltage 180 ~ 265VAC
- Charging voltage 28,8V / 29,4V / 26.4V
- Charging current: 5A
Available on backorder
-
Victron Energy Blue Smart IP67 Charger 12/7 (1) Battery Charger
130.00 €
98.50 € Excluding VAT
122.14 € Includes VATVictron Energy Blue Smart IP67 Charger 12/7 (1) Battery Charger
- Suitable for batteries: WET/MF/VRLA/AGM/GEL/LI-ION
- Built-in Bluetooth to receive mobile notifications via VictronConnect app
- Charging current: 16A
- Electrical voltage: 24V
- Dimensions: 235 x 108 x 65mm
Available on backorder
-
Victron BlueSolar MPPT 100/30 - Charge Regulator 30A-MPPT for Photovoltaic-Wind Turbines
119.00 €
100.00 € Excluding VAT
124.00 € Includes VATVictron BlueSolar MPPT 100/30 - Charging Regulator 30A-MPPT for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.Specifications
Model Victron BlueSolar MPPT 100/30 battery voltage 12/24 volt auto select Rated charging current 30A Maximum PV power, 12V (a, b) 440 W Maximum PV power, 24V (a, b) 880 W Max. PV Short Circuit Current 30A Maximum PV open circuit voltage 100V Peak efficiency 98% Self consumption 10mA Charge voltage 'absorption' Adjustable, default = 14.4V / 28.8V Charge voltage 'float' Adjustable, default = 13.8V / 27.6V Charge algorithm Multi-stage adaptive Temperature compensation -16 mV / ° C resp. -32 mV / ° C Operating temperature -30 to + 60 ° C (full rated output up to 40 ° C) Humidity 95%, Non-condensing Available on backorder
-
Blue Power IP22 Charger 12/20 Battery Charger (1 Output)
121.00 €
101.60 € Excluding VAT
125.98 € Includes VATWith up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. And once the battery is fully charged, power consumption is reduced below 0.5 Watt, a value about five to ten times lower than the industry standard.
Available on backorder
-
Victron Blue Smart IP65 Charger 12/7 + DC connector Battery Charger
130.00 €
103.00 € Excluding VAT
127.72 € Includes VATVictron Blue Smart IP65 Charger 12/7 + DC connector Battery Charger
New professional battery charger with built-in Bluetooth. The Blue Smart IP65 charger can be used on devices in your lab and in motorized vehicles such as cars, motorbikes, boats and caravans
Available on backorder
-
Victron Blue Smart IP65 Charger 24/5 + DC connector Battery Charger
138.00 €
103.00 € Excluding VAT
127.72 € Includes VATVictron Blue Smart IP65 Charger 24/5 + DC connector Battery Charger
- Built-in Bluetooth so you can check the charger and battery status from your smartphone
- The charger is supplied with "crocodile" to facilitate its connection to the battery
- Voltage: 24V
- Charging current: 5A
- Dimensions: 47 x 95 x 190mm
- Weight: 0,8kg
Available on backorder
-
Epsolar XTRA 4210N MPPT 24V 40A Charge Controller
145.27 €
103.00 € Excluding VAT
127.72 € Includes VATEpsolar XTRA 4210N MPPT 24V 40A Charge Controller
MPPT charge controllers from EPsolar are suitable for all polycrystalline and monocrystalline type panels. The built-in screen they have allows you to see all the indications of your system and thanks to the algorithm for detecting the maximum power point of the photovoltaics, it maximizes the efficiency of your system by 30%.
Available on backorder
-
Blue Power IP22 Charger Battery Charger 24/12 - 1 'Output
124.00 €
104.00 € Excluding VAT
128.96 € Includes VATThe highest performance ever achieved!
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. In addition, once the battery is fully charged, power consumption is automatically reduced below 0.5 Watt, a value about five to ten times lower than the industry standard, a feature that makes this charging range one of the best and most reliable on the market.
Price without VAT
Available on backorder
-
Blue Power IP22 Charger 24/12 (3 Outputs)
124.00 €
104.00 € Excluding VAT
128.96 € Includes VATThe highest performance ever achieved!
With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications. In addition, once the battery is fully charged, power consumption is automatically reduced below 0.5 Watt, a value about five to ten times lower than the industry standard, a feature that makes this charging range one of the best and most reliable on the market.
Price without VAT
Available on backorder
-
Epsolar XTRA 3215N MPPT 24V 30A Charge Controller
153.00 €
105.00 € Excluding VAT
130.20 € Includes VATEpsolar XTRA 3215N MPPT 24V 30A Charge Controller
MPPT charge controllers from EPsolar are suitable for all polycrystalline and monocrystalline type panels. The built-in screen they have allows you to see all the indications of your system and thanks to the algorithm for detecting the maximum power point of the photovoltaics, it maximizes the efficiency of your system by 30%.
Available on backorder
-
Victron Energy -Blue Smart IP67 Charger 12/13 (1) Battery Charger
134.91 €
107.79 € Excluding VAT
133.66 € Includes VATVictron Energy -Blue Smart IP67 Charger 12/13 (1) Battery Charger. Charger with built-in Bluetooth for communication and settings from your mobile. With up to 94% efficiency, the heat loss of these chargers is three to four times lower than the industry specifications.
Available on backorder
Renewable Energy> Photovoltaic-Batteries-Inverters-Regulators
PRODUCT CATEGORIES
- Photovoltaic Panels
- Charge Controllers
- Photovoltaic Inverter
- Autonomous PV Systems
- Solar batteries
- Photovoltaics-Roof-Net metering
- Victron-Products
- Victron energy dealership
- Victron Accessories Accessories
- Victron Autotransformers
- Victron Batteries
- Battery isolators
- Victron Battery monitoring systems
- Victron Battery protection
- Victron Chargers
- Victron DC-DC Transformers
- Victron DC Distribution Systems
- Victron Inverters
- Victron Inverters-chargers
- Victron Isolation transformers
- Victron Monitoring systems and panels
- Victron Solar chargers
- Victron Solar Inverters
- Victron Solar panels
- Victron Transfer switches
- Electric car chargers
- Handmade jewelry
- Healthy Eating-Avocado
- Contact
- Home
- PV Panel
- Charge Controllers
- Inverter
- Autonomous PV
- Batteries
- Net metering
- Victron-Products
- Victron energy dealership
- Victron Accessories Accessories
- Victron Autotransformers
- Victron Batteries
- Battery isolators
- Victron Battery monitoring systems
- Victron Battery protection
- Victron Chargers
- Victron DC-DC Transformers
- Victron DC Distribution Systems
- Victron Inverters
- Victron Inverters-chargers
- Victron Isolation transformers
- Victron Monitoring systems and panels
- Victron Solar chargers
- Victron Solar Inverters
- Victron Solar panels
- Victron Transfer switches
- Contact
