Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
2500VA 12V / with built-in battery charger 0-160A
Xtender Conergy offers all the functions in one device
a clean sine wave inverter, a highly efficient battery
charger, a powerful transmission system and intelligent amplification from external power sources.
Price without VAT
Available on backorder
2500VA 12V / with built-in battery charger 0-160A
Price without VAT
The Conergy Xtender offers all the functions in a single device
of a pure sine wave inverter, a highly efficient battery
charger, a powerful transfer system and intelligent boosting
of external power sources. Its outstanding capabilities set
new benchmarks and provide unmatched freedom of use.
The Conergy Xtender is the perfect solution for complex
hybrid off-grid systems. It is able to accommodate all types
of energy sources, such as photovoltaic modules, small wind
turbines, diesel gensets or the public power grid, regardless of
whether it works as a single- or three-phase generator.
The Conergy Xtender offers maximum flexibility with regard to
the AC output, as output powers from 2.5 kVA to 21 kVA (single phase)
and from 7.5 kVA to 63 kVA (three-phase) can be achieved
with only one product type. This simplifies the planning and
system design of off-grid systems significantly and allows the
system to be ideally adapted to specific energy requirements
Model Conergy Conergy Conergy Conergy
Xtender 3000-12 Xtender 5000-24 Xtender 6000-48 Xtender 8000-48
Inverter
Rated battery voltage 12V 24V 48V 48V
Input voltage range 9.5–17 V 19–34 V 38–68 V 38–68 V
Continuous power @ 25 ° C 2,500VA 4,500VA 5,000VA 7,000VA
Smart boost power 3,000VA 5,000VA 6,000VA 8,000VA
30 minute load @ 25 ° C 3,000VA 5,000VA 6,000VA 8,000VA
5 second load @ 25 ° C 3 × Pcont
maximum load Up to short-circuit
Maximum asymmetric load Up to Phnom
Load detection (standby) 2 to 25 W
Admissible cos phi 0.1 – 1 Feet
Maximum efficiency 93% 94% 96% 96%
Open-circuit power OFF / standby / ON 1.7 W / 2.2 W / 14 W 1.8 W / 2.5 W / 20 W 2.2W / 3 W / 22 W 2.2 W / 3.8 W / 34 W
Output voltage Sine wave 230 VAC (+ 0 / -10%) adjustable to 190–245 VAC
Output frequency 50 Hz adjustable 45–65 Hz ± 0.05% (quartz-controlled)
Harmonic distortion <2%
Overcharge and short-circuit Automatic disconnection then 3 startup attempts
Overheating protection Alarm prior to disconnection and automatic restart
Battery charger
6-phase battery charger Programmable IU-Uo-equalization-Uo (low) -U (periodic)
Adjustable charging current 0–160 A 0–140 A 0–100 A 0–120 A
Input current sharing system 1-50A
Maximum input voltage 265 VAC
AC input voltage range Level of detection adjustable from 150 to 230 VAC
Admissible input frequency 45–65 Hz
Battery control (factory value / adjustable range with RCC-02)
Absorption voltage 14.4 V / 9.5–18 V 28.8 V / 19–36 V 57.6 V / 38–72 V 57.6 V / 38–72 V
Floating voltage 13.6 V / 9.5–18 V 27.2 V / 19–36 V 54.4 V / 38–72 V 54.4 V / 38–72 V
Equalization voltage - / 9.5–18 V - / 19–36 V - / 38–72 V - / 38–72 V
Low voltage disconnection 10.8 V / 9.5–18 V 21.6 V / 19–36 V 43.2 V / 38–72 V 43.2 V / 38–72 V
Temperature compensation –5 / 0 to –8 mV / ° C / cell (optional BTC-01)
General data
Auxiliary contacts 2 independent contacts 16 A - 250 VAC (potential-free 3 points)
Maximum transfer relay current A 50
Maximum transfer time 15 ms
Weight 34kg 40kg 42kg 46kg
Dimensions: H x W x D mm 220 × 290 × 500 220 × 290 × 500 220 × 290 × 500 220 × 310 × 500
protection type IP23
Compliance EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2, Dir. 89/336 / EEC, LVD 73/23 / EEC
Operating temperature range –20 to +55 ° C
Ventilation Forced from 55 ° C
Noise level <10 dB / <35 dB (without / with ventilation)
Warranty 2 years
Weight | 1 kg |
---|---|
Brand |