Victron MPPT Control (VE.Direct cable not included)

MPPT Control allows you to view the status and configure all BlueSolar MPPT charge controllers that have a VE.Direct communication port. The MPPT Control is also housed in the familiar BMV-700 series housing, maintaining a consistent and professional appearance to your systems' panels and monitoring equipment.

Connects via VE.Direct cable to charge regulators BlueSolar/SmartSolar MPPT by Victron and displays on the screen a series of sizes that help the user to have an overview of the performance of the photovoltaic system:

– The power of the panels
– The tension of the panels
– Energy production from photovoltaics
– Battery voltage and current
– The state of charge of the battery
– The current absorbed by the load

Features Victron MPPT Control

• View real-time status information. Including solar watts, battery voltage, charge current, load current and more.
• View historical information
  A. All time prices
  B. 30-Day Historical Prices
• MPPT setting

MPPT Control function

MPPT Control starts in "Live View", which shows the nine most important values ​​of the MPPT Solar charge controller, such as "solar panel power", "current efficiency", "voltages" and "currents", as well as "state of charge" and "load state".

Other information, such as historical MPPT values, can be accessed by pressing 'select'. All-time values ​​such as 'total efficiency' and other valuable information such as 'maximum solar panel voltage', 'maximum and minimum battery voltage' and the last 4 faults can also be viewed. All stored information from your MPPT can be selected and viewed with MPPT Control. Within the 30-day history in addition to common information such as "daily performance", "minimum and maximum voltages and currents", important information about the duration of charging stages such as "bulk, absorption and float" can also be displayed during a specific day. With such extensive information the user can gain significant insight into his system.

MPPT: Ultra fast maximum power tracking

By constantly monitoring the output voltage and current of your solar panels (PV), MPPT technology ensures that every drop of available power is flushed from your panels and collected for storage. The advantage of this is most noticeable when the sky is partly cloudy and the light intensity is constantly changing.

Remote monitoring and control

Remotely control and monitor the extensive capabilities of the SmartSolar MPPT charger with built-in Bluetooth. By connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere. So much for it VictronConnect as well as VRM is free to use. For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520 .

Output loading

The intelligent load output function prevents damage caused by running "empty" batteries. You can configure the voltage at which SmartSolar disconnects a load – thus preventing excessive draining of your batteries. And here's the smart part: SmartSolar will attempt a 100% recharge every day. If he can't – in times of bad weather – he turns up the disconnect voltage, every day, until he succeeds. We call this feature BatteryLife because it maintains the health and extends the life of your battery.

Installation of Victron MPPT Control

Communication cable
Connect the MPPT Control to the BlueSolar MPPT Charge Controller with a VE.Direct cable. Please note that this cable is not included
must be purchased separately.
Power cord with built-in fuse
Wiring the supplied power cable is only necessary when the MPPT used is a 75/50, 100/50 or 150/35 MPPT and its part number
starts with SCC01. These previous versions close at night. In this case, please use the safety power cable to power the MPPT Control
directly from the battery. This way MPPT Control remains on while MPPT is off and the last shot status, history and
MPPT settings can be viewed when the sun goes down.
Wiring this power cable is not necessary for all other models, not even for the SCC02 or later versions of the above three models.

What you need to know about Victron Energy solar chargers (charge controllers).

In this blog, we'll learn about Victron Energy solar chargers (charge controllers), how they work and what you need to know about them.

Solar energy is one of the most renewable and sustainable energy sources available today. Solar panels (photovoltaic panels) convert sunlight into electricity that can be used to power your home or business. Solar chargers are devices used to store and convert solar energy into electricity that can be used to power your electronic devices.

Victron Energy is a world leader in solar chargers (charge controllers) and other solar related products. Victron Energy solar chargers are some of the most popular and reliable solar chargers (charge controllers) on the market today.