Victron BlueSolar MPPT 150/60-Tr - 60A-MPPT Charge Regulator for Photovoltaic-Wind Turbines
Advanced finding of optimal power efficiency in case of partial shading
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Extremely fast find the maximum power efficiency point (MPPT)
Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Excellent perfomance
• Without cooling fan. The mmaximum yield exceeds 98%.
• Full output current up to 40 ° C (104 ° F).
Flexible charging algorithm
Fully programmable charging algorithm and eight already programmed algorithms to be selected with a rotary switch.
Complete electronic protection
• Overheating protection and automatic reduction of the output power to protect the device when the temperature is high.
• Short-circuit protection in photovoltaics and protection against polarity reversal.
• Protection from reversal current flow.
Internal temperature sensor
Monitors and controls the temperature of the device by compensating for the fluctuating one trend charging batteries.
Specifications
Blue Solar MPPT 150/60 Tr
|
|
| Battery Voltage |
12/24/48 V Auto Select (software tool needed to select 36V) |
| Rated charging current |
A 60 |
| Maximum PV power 12V 1a, b) |
860w |
Maximum PV power 24V 1a, b)
|
1720w |
| Maximum PV power 48V 1a, b) |
3440w |
Maximum PV open circuit voltage
|
150V absolute maximum coldest conditions
145V Start-up and Operating Maximum |
| Maximum efficiency |
98% |
Self-consumption
|
10mA |
| Charge voltage 'absorption' |
Default setting: 14,4 / 28,8 / 43,2 / 57,6 V (adjustable) |
Charge voltage 'float'
|
Default setting: 13,8 / 27,6 / 41,4 / 55,2 V (adjustable) |
| Charge algorithm |
multi-stage adaptive |
Temperature compensation
|
-16mV / ° C resp. -32mV / ° C |
Protection
|
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity / Output short circuit / Over temperature |
Operating temperature
|
-30 to + 60 ° C (full rated output up to 40 ° C) |
Humidity
|
95% non-condensing |
Data communication port and remote on-off
|
VE.Direct (see the data communication white paper on our website) |
Synchronized parallel operation
|
Not possible |
Enclosure
|
Colour
|
Blue (RAL5012) |
PV terminals 2)
|
35 mm² / AWG2 (Tr models), or Dual MC4 connectors (MC4 models) |
Battery terminals
|
35 mm / AWG2 |
Protection Category
|
IP43 (Electronic Components), IP22 (Connection Area) |
Weight
|
3 kg |
Dimensions (hxwxd)
|
200 x 250 x 95 mm |
| Standards |
Safety
|
EN / IEC 62109 |
| 1a) If more PV power is connected, the controller will limit input power to the stated maximum
1b) PV voltage must exceed Vbat + 5V for the controller to start
2) MC4 models: several splitter pairs will be needed to parallel the strings of solar panels |
Information at the link
https://www.victronenergy.gr/upload/documents/Datasheet-BlueSolar-charge-controller-MPPT-150-45-up-to-150-100-EN.pdf
Price without VAT
