Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Victron Blue Smart IP65s Charger 12/4 + DC connector Battery Charger
New professional battery charger with built-in Bluetooth. The Blue Smart IP65 charger can be used on devices in your lab and in motorized vehicles such as cars, motorbikes, boats and caravans
Available on backorder
Victron Blue Smart IP65s Charger 12/4 + DC connector Battery Charger : The Victron Blue Smart Charger IP65s 12V 4A with built-in Bluetooth for workshops, cars, caravans, motorcycles and boats provides the battery with the necessary energy, maintains its health and ensures better performance and longer life.
The charger Victron it provides the battery with the energy it needs, maintains its health and ensures improved performance and longer battery life. The device has a smart 7-step charging algorithm that makes the most of the battery.
The efficiency is 94%. The Blue Smart IP65s charger produces 3-4 times less heat than the industry standard. After the battery is fully charged, the power consumption is reduced to 0,5 Watt. This is 5-10 times better than the industry standard.
Most chargers with reverse polarity protection do not recognize and therefore will not recharge a battery that has been discharged to zero or near zero volts. However, the Blue Smart Charger will attempt to recharge a fully discharged battery at low current and resume normal charging once sufficient voltage is developed across the battery terminals.
Built-in Bluetooth
Via Bluetooth in conjunction with the VictronConnect app, you can check the status of the charger and battery anytime, anywhere on your smartphone, tablet or laptop. All settings of the battery charger they can also be configured directly through the application.
The VictronConnect application
Set, read and configure the Blue Smart IP65 charger via your smartphone. You can view the status of your charger and battery and even control your charger functions using the VictronConnect app. On your screen the indication of voltage and current is available by default.
"Green" battery charger extremely high efficiency
With up to 95% efficiency, these chargers produce up to four times less heat than the industry standard. And once the battery is fully charged, power consumption is reduced to 0,5 watts, about five to ten times better than the industry standard.
The scope of delivery includes crocodile clips and M8 holes for easy connection to the battery.
Technical information | |
Bluetooth | bluetooth |
DC Input / Output, V | 12 |
Input voltage, AC (DC) | 180-265VAC/45-65Hz ή 250-350VDC |
Output current, A | 4 |
Output power, W | 48 |
Exits | 1 |
Size | 47 x 95 x 190 |
VE.Bus |
The Victron battery charger is an intelligent battery charger for lead acid and deep cycle batteries. The unit is designed for home or business use and features a compact size that can be placed under a counter or inside equipment cabinets.
The Victron IP22 charger is a simple, rugged and reliable charger designed for deep discharge or PV batteries. It features a two-stage charging algorithm that ensures optimal battery performance and longevity. In the first stage, the charger applies constant current to the battery, which raises it to its maximum voltage. In the second stage, the charger maintains a constant voltage, which allows the battery to safely absorb as much energy as possible.
A deep discharge battery is a lead-acid battery designed to be discharged and recharged regularly. Deep cycle batteries are used in applications where a high depth of discharge (DOD) is required, such as in renewable energy systems.
Lead-acid batteries work by converting chemical energy into electrical energy. The lead-acid battery was invented in 1859 by the French physicist Gaston Planté and is the oldest type of rechargeable battery. Lead-acid batteries consist of lead dioxide (PbO2) and spongy lead (Pb) electrodes in a sulfuric acid (H2SO4) electrolyte solution.
When a lead-acid battery discharges, the sulfate ions in the electrolyte are converted to sulfate radicals, which then react with the lead electrodes to form lead sulfate (PbSO4). During charging, the reverse reaction occurs and lead sulfate is converted back into sulfate ions.
The capacity of a lead-acid battery is usually measured in ampere-hours (Ah), which is the amount of current that can be delivered over time. Depth of discharge (DOD) is the percentage of capacity that has been depleted during discharge. For example, if a 100 Ah battery is discharged at 50 A for two hours, the DOD would be 50%.
Deep discharge batteries are designed to withstand repeated deep discharges, making them ideal for renewable energy systems where power generation may not always be