Solaredge SE SE25K SETAPP network inverter for photovoltaics

2,429.00 
1,939.28  Excluding VAT
2,404.71  Includes VAT

Solaredge SE SE25K SETAPP network inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.

Available on backorder

  ... people are viewing this right now

  Share

Solaredge SE SE25K SETAPP network inverter for photovoltaics

Solaredge SE SE25K SETAPP network inverter for photovoltaics: A complete solar system solution

Solaredge SE SE25K SETUP: Three-phase converter Solaredge SE SE25K SETUP 3 kW for PV systems.

The SolarEdge SE25K three-phase converter combines state-of-the-art digital control technology with efficient power conversion architecture to achieve superior solar collection and best-in-class reliability.

Constant voltage technology ensures that the solar inverter always operates at its optimum input voltage, regardless of the number of units in a series or environmental conditions. A proprietary data monitoring receiver is integrated into the inverter and collects the power optimizer performance data from each photovoltaic module. This data can be transmitted over the internet and accessed through the SolarEdge monitoring platform for performance analysis, fault detection and troubleshooting of photovoltaic systems.

PRODUCT DETAILS

solaredge-se-se25k-inverter-grid-photovoltaic, prices, specifications, purchase, cost

solaredge-se-se25k-inverter-grid-photovoltaic, prices, specifications, purchase, cost

specifications

 

Applicable to inverters With Part number

SE12.5K SE15K SE16K SE17K

SEXXK-XXXXXBXX

SE25K SE27.6K
OUTPUT
Rated AC Power Output 12500 15000 16000 17000 25000 27600 VA
Maximum AC Power Output 12500 15000 16000 17000 25000 27600 VA
AC Output Voltage - Line to Line / Line to Neutral (Nominal) 380/220; 400/230 Vac
AC Output Voltage - Line to Neutral Range 184 – 264.5 Vac
AC Frequency 50/60 ± 5 Hz
Maximum Continuous Output Current (per Phase) 20 23 25.5 26 38 40 A
Grids Supported - Three Phase 3 / N / PE (WYE with Neutral)
Utility Monitoring, Islanding Protection, Configurable Power Factor, Country Configurable Thresholds Yes
THD < 3
INPUT
Maximum DC Power (STC Module) 16850 20250 21600 22950 33750 37250 W
Transformer-less, Ungrounded Yes
Maximum Input Voltage 1000 vdc
Nominal DC Input Voltage 750 vdc
Maximum Input Current 21 22 23 23 37 40 adc
Reverse-Polarity Protection Yes
Ground-Fault Isolation Detection 700kΩ Sensitivity 350kΩ Sensitivity (1)
Maximum Inverter Efficiency 98 98.3 %
European Weighted Efficiency 97.7 97.6 97.7 97.7 98 %
Nighttime Power Consumption <2.5 <4 W
ADDITIONAL FEATURES
Supported Communication Interfaces (2) RS485, Ethernet, Wi-Fi (requires antenna) (3), ZigBee (optional), Cellular (optional)
Inverter Commissioning With the SetApp mobile application using built-in Wi-Fi access point for local connection
Smart energy management Export Limitation
Arc Fault Protection Integrated, User Configurable (According to UL1699B)
Rapid Shutdown Optional (4) (Automatic upon AC Grid Disconnect)
RS485 Surge Protection Optional (5)
DC SAFETY UNIT (OPTIONAL)
2-pole Disconnection N/A 1000V / 40A
DC Surge Protection N/A Type II, field replaceable
DC Fuses on Plus & Minus N/A Optional, 20A
Compliance N/A UTE-C15-712-1
STANDARD COMPLIANCE
Safety IEC-62103 (EN50178), IEC-62109, AS3100
Grid Connection Standards (6) VDE-AR-N-4105, G99, AS-4777, EN 50438, CEI-021, VDE 0126-1-1, CEI-016, BDEW
Emissions IEC61000-6-2, IEC61000-6-3 , IEC61000-3-11, IEC61000-3-12
RoHS Yes
INSTALLATION SPECIFICATIONS
 

AC Output Gland Diameter / Wire Cross Section

 

15-21mm / Solid wire 2.5-16 mm2

18-25mm / Solid wire

2.5-16 mm2, Stranded wire 2.5-10

mm2

DC Input 2 MC4 pairs 3 MC4 pairs
DC Input with Safety Unit N/A Gland diameter 5 - 10 mm
N/A Wire cross section 0.5 - 13.5 mm2
Dimensions (HxWxD) 540 x 315 x 260 mm
Dimensions with Safety Unit (HxWxD) N/A 775 x 315 x 260 mm
Weight 30.7 45 kg
Weight with Safety Unit N/A 48 kg
Operating Temperature Range -40 - +60 (7) .C
cooling Fan (user replaceable)
Noise <50 <55 dBA
Protection Rating IP65 - Outdoor and Indoor
mounting Provided Bracket

Solaredge Power Optimizer

Solaredge solar inverters use DC power optimization technology. This means that the power is converted to AC before it is sent to your home or business. The Solaredge Power Optimizer performs two main functions: active power filter and passive voltage control. The active power filter reduces any high frequency and harmonic noise that could compromise system performance. Passive voltage control, on the other hand, helps ensure high quality AC output by adjusting the input voltage as required. In addition, this system also has a Smart Grid Ready function, which allows you to take advantage of the latest innovations in home energy management systems.

How does saving money on your home with a Solaredge network inverter save you money?

Photovoltaic panels are a great way to generate clean energy and reduce electricity bills. They can save you money on your electricity bill by producing clean, clean energy that is not only cheaper than you pay now, but also better for the environment.

There are many other benefits to solar energy as well. You will never have a power outage because you will generate power yourself. You will also receive free, clean electricity at the end of your system life cycle and it is an investment that will pay off over time because your system will last much longer than a traditional one.

Most viewed products

Recently viewed products

  • -57%LimitedSOLD OUT
    Kyocera KC65T-1 370.00 
    159.00  Excluding VAT
    197.16  Includes VAT

    67watt 12v polycrystalline silicon technology

    Model: KC67T-1

     

    HIGH EFFICIENCY polycrystalline photovoltaic cell

    1. • Kyocera's advanced and fully automated production process guarantees a highly efficient polycrystalline photovoltaic cell.

    2. • The efficiency of the cells exceeds 16%.

    3. • The photovoltaic panel is installed in an anodized aluminum frame that ensures tightness and structural strength.

    4. • The cable connections are plug type for ease of installation and minimization of losses (plug in connectors).

    Price without VAT

    Out of stock

  • -20%LimitedSOLD OUT
    abb iv uno-dm-1.2-tl-inverter-grid-photovoltaic, prices, technical data, purchase, cost
    Network Inverter ABB IV UNO-DM-1.2-TL-PLUS-SB Single Phase With DC Switch 869.00 
    693.79  Excluding VAT
    860.30  Includes VAT

    Network Inverter ABB IV UNO-DM-1.2-TL-PLUS-SB INT Single phase with DC switch

    Out of stock

  • -27%Limited
    Victron Energy Phoenix Smart IP43 Charger 24/25 (3) 120-240V Battery Charger
    Victron Energy Phoenix Smart IP43 Charger 24/25 (3) 120-240V Battery Charger 613.75 
    450.00  Excluding VAT
    558.00  Includes VAT

    Victron Energy Phoenix Smart IP43 Charger 24/25 (3) 120-240V

    • Supports battery technologies (Wet, Mf , Vrla, Agm, Gel, Li-Ion)
    • It has Bluetooth to connect to the Victron Connect app
    • Short circuit, overload and overvoltage protections

    Available on backorder

  • -44%LimitedSOLD OUT
    Battery Gel 150AH (Asian markets) 425.00 
    239.00  Excluding VAT
    296.36  Includes VAT

    150AH 12V GEL closed type deep discharge with a lifespan of 10-12 years.

    Price without VAT

     

    Out of stock

  • -23%LimitedSOLD OUT
    Xantrex DR 2424 E 1,454.00 
    1,119.00  Excluding VAT
    1,387.56  Includes VAT

    2400VA 24V converter with integrated charger and metal relay

    Price without VAT

    Out of stock

  • -21%Limited
    fronius-symo-5.0-3-m-inverter-grid-photovoltaic, prices, specifications, purchase, cost
    Fronius FR SYMO 5.0-3-M network inverter for photovoltaics 1,770.00 
    1,390.00  Excluding VAT
    1,723.60  Includes VAT

    Fronius FR SYMO 5.0-3-M network inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.

  • -17%LimitedSOLD OUT
    2V ergosolar t 700
    2V ergosolar t 700 155.00 
    129.00  Excluding VAT
    159.96  Includes VAT

    524AH C10 until 702AH C120, 2V type deep discharge batteries PZS Solar TUBE low maintenance type, specially designed for use in charge - discharge cycles

    ErgoSolar T permanent batteries are TUBE type low maintenance, specially designed for use in charge-discharge cycles, high autonomy and safety. These batteries are used as energy storage in the systems of exploitation of renewable energy sources (RES), ie Photovoltaic systems, Wind turbines, Hydroelectric, etc.

    Price without VAT

    Out of stock

  • -25%Limited
    Lithium Battery ULM-12-180 Ultimatron LiFePO4 Lithium Battery 12.8V 180Ah / 2304 Wh / with bluetooth and smart BMS with 5 YEAR warranty
    Lithium Battery ULM-12-180 Ultimatron LiFePO4 Lithium Battery 12.8V 180Ah / 2304 Wh / with bluetooth and smart BMS with 5 YEAR warranty 1,490.00 
    1,119.00  Excluding VAT
    1,387.56  Includes VAT

    Lithium Battery ULM-12-180 Ultimatron LiFePO4 Lithium Battery 12.8V 180Ah / 2304 Wh / with bluetooth and smart BMS with 5 YEAR warranty

    Minimum order 2 pieces. Delivery 4-6 days from France

  • -33%Limited
    Phocos CML 10-2 39.00 
    26.00  Excluding VAT
    32.24  Includes VAT

    10A 12V / 24V

    Solar Charge Regulators

    Price without VAT

    In stock

  • -27%LimitedSOLD OUT
    Victron Energy-Phoenix 24/350 153.00 
    112.00  Excluding VAT
    138.88  Includes VAT

    The Victron Energy-Phoenix 24/350 (350 watt 24 Volt) converter ensures pure sine efficiency, high peak power and high efficiency. The combination of high frequency and linear frequency ensures the greatest possible benefit.

    Price without VAT

    Out of stock

SE SE25K, grid inverter for photovoltaics, prices,

SE SE25K, grid inverter for photovoltaics, prices,

SE SE25K network inverter for photovoltaics, prices, discounts, offers, technical data, net metering photovoltaics

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category