1,680.00 € 1,340.36 € Excluding VAT 1,662.05 € Includes VAT
SMA IV STP 6.0 TL INT BLUE 6000W Three Phase Photovoltaic Inverter. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
SMA IV STP 6.0 TL INT BLUE 6000W Three Phase Photovoltaic Inverter
SMA IV STP 6.0 TL INT BLUE 6000W Three Phase Photovoltaic Inverter:
Thanks to the integrated web interface for easy commissioning via smartphone or tablet and the service SMA Smart Connected, this converter offers real convenience and comfort to operators and installers of photovoltaic systems. Innovative solutions for photovoltaic applications of all sizes and unsurpassed service offer our customers worldwide greater independence by meeting their energy needs. In cooperation with our partners and customers, SMA ensures an autonomous, decentralized and renewable energy supply.
PRODUCT DETAILS
SMA IV STP 6.0 TL INT BLUE 6000W Photovoltaic Inverter Three-phase-photovoltaic, net metering, roof photovoltaic, household
SMA IV STP 6.0 TL INT BLUE 6000W Three Phase Photovoltaic Inverter
Maximum. DC input voltage (V):
850,00
Minimum input voltage Mpp (V):
260
Rated AC power (kVA):
6,00
Number of Mpp-Trackers:
2
Arc fault circuit breaker:
no
Maximum. AC power (kVA):
6,00
European efficiency (%):
97,60
Topology:
without transformer
Power phases:
3
Maximum input voltage Mpp (V):
800
Degree of protection (IP):
IP65
Number of string entries (pcs):
2
Maximum. DC generator power (kWp):
9,00
Interface 2:
Maximum. efficiency (%):
98,20
Maximum. input current (A):
24,00
Step-Up Converter:
Yes
Interface 1:
Display:
without screen
Intelligent Solar Energy Production
The Sunny Tripower has it all, with established product features such as OptiTrac Global Peak and SMA Smart Connected now complemented by integrated TS4-R communication to optimize the unit. Thanks to this, even shading on the unit is not a problem. The integrated OptiTrac Global Peak shadow management system ensures maximum light shadow performance. For large quantities of shaded or composite roof structures, TS4-R unit optimizers can be easily and selectively installed for maximum performance.
The free SMA Smart Connected service analyzes the operation of the inverter, immediately informs the installer about anomalies and offers suggested solutions to ensure maximum system availability. Operators and installers can monitor the system at any time through the SMA monitoring portals. Thanks to the TS4-R module optimizer, it is still possible to monitor each individual module on request.
Built-in SMA Smart Connected service
Integrated shadow management with OptiTrac Global Peak and TS4-R communication
Free online monitoring via Sunny Portal and Sunny Place
Dynamic active power limitation
SMA has solutions for a renewable and independent power supply in both home and business energy.
Specifically :
SMA Energy System Home is the perfect combination of high quality equipment, smart management and excellent service. Its modular design means it is easy to get started and allows the system to be expanded to fit your budget and requirements at any time without hassle.
The new SMA Energy Systems have a modular structure with perfectly matched components from a single source. In addition to the hardware, it has convenient solutions for monitoring and control through the web portal or the new Energy application. You can start with the complete system or a smaller solution and gradually expand it, depending on what best suits your needs and budget.
System solutions with Sunny Central Storage battery converters are used in power stations and hybrid photovoltaic systems worldwide. They ensure the stability of transmission lines and reduce energy costs through the use of photovoltaic energy and large-scale battery storage systems in hybrid power generation systems.
Why you should go to Sunny Boy:
The Sunny Boy series is designed to optimize energy use and is equipped with a large number of energy saving features. Thanks to the inverter function, the Sunny Boy ensures maximum use of the output voltage, even when the mains frequency is less than 50 Hz. In addition, it has an advanced load management system and can monitor energy consumption in real time. You may have noticed that some solar panels operate at optimum levels only when connected to a converter, while others operate independently. This is because not all converters are created equal and there are many factors that require choosing one over the other.
Focusing on what really matters, Sunny Boy 2.0 also offers impressive communication capabilities. The intuitive user interface (Web UI) makes it possible to monitor system data on any smartphone, tablet, laptop or traditional computer. This allows the user to choose between local and electronic tracking through Sunny Places and Sunny Portal.
New communication concept thanks to the Web UI
System data monitoring is possible on all smartphones and tablets
Choose between local and online tracking via Sunny Portal and Sunny Places
Factory-built Ethernet and WLAN interface
Professional monitoring via Webconnect with the professional package Sunny Portal
The photovoltaics have significant benefits for the consumer and for sustainable development. The autonomous photovoltaic system, ie the photovoltaic on the roof, provides energy autonomy with the possibility of storing energy in batteries. At the same time it introduces a new way of life, independence and carefree.
Advantages :
Financially. The increase in the cost of electricity involved in the connection to PPC leads to the idea of getting rid of the monthly bills. Installing an autonomous photovoltaic system is an economical solution, given the fall in prices of photovoltaic panels with the advancement of technology and the increase in their demand worldwide
Ecological. The positive footprint in the environment of an autonomous photovoltaic system with zero dependence on non-renewable and "dirty" hydrocarbons is not a negligible parameter. So they are environmentally friendly and do not cause pollution from electricity generation.
Reliability. Photovoltaics on roofs are one of the most reliable and efficient electricity generation systems that exist in our country. By installing them, photovoltaics on the roofs of permanent homes and cottages can and do provide autonomy and great economy.
The Victron Phoenix 48/250 VE.Direct (MPN PIN482510200) is a small sinusoidal inverter with a constant output of 200W. Converts 48V DC to 230V AC with pure sine wave, suitable for supply even to sensitive electronic devices. Its level of performance is very high and thanks to the integrated Eco-Mode function one of the best in this category.
Through the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone that allows the configuration of various system parameters, such as the switch on and off the voltage at low battery charge. Other settings such as output frequency or voltage, as well as a bipolar contact-alarm are just some of the features of this converter.
The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. With the application of Hybrid HF Technology, these inverters succeed in successfully combining the highest degree of efficiency with the ability to support loads with high starting current without problems. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.
This is a compact, single box solution which contains a 3kva inverter and 2.3kwh lithium Ion battery. This contains a 50A transfer relay and connects inline between your supply grid and your PV inverter + protected loads.
The main advantage of this is its simple installation and simple operation. However while compact and easy to install… there are no limits in its functionality.
Its main operation is to charge its internal battery from surplus power from the PV system during the day. At night, the ECOMulti disconnects from the grid and runs from battery. If the power requirements are too high, or the battery runs low, then it reconnects to the grid.
The Quattro can be connected to two independent AC power supplies, for example to a ground power source and to one generator, or to two generators. The Quattro automatically connects to the active power source. Quattro prevents overloading of a source with limited AC voltage. First, the battery charge decreases automatically when there may be an overload. The second level increases the power of a generator or secondary supply from a ground source with battery power.
Fully programmable Victron inverters, developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
The Multi is a powerful sine wave inverter, a sophisticated battery charger with adaptive charging technology and a high-speed AC transfer switch, in a single compact box. Multi prevents overloading of a source with limited AC voltage. In the event of a fault in the network or if the power is disconnected from the ground source or the generator, the inverter inside the Multi is automatically activated and takes over the power supply of the connected loads.
Combined with the flexibility of a MultiPlus bidirectional converter The MultiPlus range of bidirectional converters is the worldwide product of choice on boats and vehicles to generate AC power, and to recharge batteries, either with shore power or an onboard AC generator.
The MultiPlus is also the industry standard in on-grid and off-grid energy storage systems and is approved for use in energy storage and self-consumption systems in the UK (G83 / 2 and G59-3-1 standards).
Several hardware and firmware modifications were needed to qualify for VDE-AR-N 4105 and other country specific energy storage related standards.
The resulting product is the MultiGrid.
The MultiGrid fits seamlessly in all common energy storage topologies There is no one-size-fits-all solution to energy storage. The building blocks, topology and control systems will depend on local conditions and regulations.
The MultiGrid hardware, together with a wide range of software tools, seamlessly fits in all common topologies.
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
VDE-AR-N 4105 and AS / NZS 4777.2 approval (other country specific approvals will follow soon) Combined with the flexibility of a MultiPlus bidirectional converter The MultiPlus range of bidirectional converters is the worldwide product of choice on boats and vehicles to generate AC power , and to recharge batteries, either with shore power or an onboard AC generator. The MultiPlus is also the industry standard in on-grid and off-grid energy storage systems and is approved for use in energy storage and self-consumption systems in the UK (G83 / 2 and G59-3-1 standards).
Several hardware and firmware modifications were needed to qualify for VDE-AR-N 4105 and several other country specific energy storage related standards. The resulting product is the MultiGrid. The MultiGrid fits seamlessly in all common energy storage topologies There is no one-size-fits-all solution to energy storage. The building blocks, topology and control systems will depend on local conditions and regulations. The MultiGrid hardware, together with a wide range of software tools, seamlessly fits in all common topologies, shown in the pictures below. More detail can be found in our Energy Storage brochure.
The small series of Victron inverters continues to use the proven solution of the complete bridge with a toroidal transformer. The new series, however, has a new casing, new electronics and new software. The units consist of a steel frame with a plastic cover, while the electronic management of the inverters provides improved dynamic output voltage stability. Last but not least is the range of communication and feature configuration options offered by Victron using the V.Direct software.
Victron inverters developed for professional use. The Phoenix range of inverters is suitable for the widest range of applications. The design criteria were to produce a pure sine inverter with optimized efficiency but no performance compromises. Using HF hybrid technology, the result is an excellent quality product with compact dimensions, light in weight and able to provide power, without problems, to any load.
The Victron Energy Phoenix series are pure sine converters, top quality construction and very high efficiency. With the application of Hybrid HF Technology, these inverters succeed in successfully combining the highest degree of efficiency with the ability to support loads with high starting current without problems. Suitable for autonomous systems and in cases where uninterruptible power supply is needed.
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery (They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kwaveraged per year in Southern regions.
4 pcs. Φ / Β panelSolarEnergySE 270 / 270-275 wattPoly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/16003200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGMcorresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
The MultiPlus is a powerful sine wave inverter, a sophisticated battery charger with adaptive charging technology and a high-speed AC transfer switch, in a single compact box. Available in models from 500VA to 5000VA. MultiPlus prevents overcharging of a low voltage AC source. In the event of a fault in the network or if the power is disconnected from the ground source or the generator, the inverter inside the Multi is automatically activated and takes over the power supply of the connected loads.
High efficiency photovoltaic ECO 280-285 Watt with a positive tolerance of up to + 3% and 12 years factory warranty 25 years linear with 80% efficiency guarantee.
Product information
280watt -285watt high performance polycrystalline silicon.
The high efficiency and fidelity ECO SOLAR photovoltaic panel is a new generation of modern polycrystalline technology photovoltaic generator that contains cells with anti-reflective coating and glass to produce more energy (more kWh per kWp) from your installation.
All photovoltaic panels imported in Greece have a positive tolerance of up to + 3% of their nominal power in watts, giving in fact more watts, which allows them to reach efficiencies of up to 18.6% in relation to the incident solar energy.
The photovoltaic panels are of very high quality and have European certifications TUV, CE, ISO 2000-2001
4 PzB 400 2V SUNLIGHT deep discharge battery. Traction battery - traction, open type with liquids, with 2500 cycles at 50% COMINGandwith excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily power to your industrial or commercial vehicles.
For more than two decades the name MASTER (MPS) in Power Generating Pairs is equal in quality, durability and reliability. The world-famous, powerful engines SUBARU Japan, in combination with the sturdy metal frame with electrostatic painting and the anti-vibration system, provide the H / Z MASTER smooth operation, long life and excellent performance for any use, in any conditions. All generators MASTER (MPS) are certified with CE, while, before being made available to the consumer public, they have undergone a series of demanding and fully valid tests by a certified body, in order to determine their high level of operation, in accordance with the strictest EU standards.
