Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
20A MPPT Phocos charge regulator
MPPT includes a sweep-mode that runs through the entire solar panel voltage range once every 2 hours to find the point of absolute maximum output power.
Price without VAT
In stock
20A MPPT Phocos charge regulator
MPPT includes a sweep-mode that runs through the entire solar panel voltage range once every 2 hours to find the point of absolute maximum output power
The three-phase temperature compensation curve IU charge alogarithm regulation significantly extends the life of your battery.
The ability to use less expensive network-feed-in solar panels with up to 95V open circuit voltage for 12V or 24V stand-alone systems will significantly reduce the cost of the overall system.
TYPE | MPPT 100 / 20-1 |
---|---|
Rated Voltage | 12V / 24V, automatic recognition |
Max. Solar Input Voltage Voc |
95V |
Max. PV Input Power |
300W @ 12V, 600W @ 24V |
Max. Battery Charge Current | 20A |
Power Conversion Efficiency | up to 97% |
Standby power consumption |
<30mW at 12V system voltage (<2mA) <80mW at 24V system voltage (<3mA) |
Temperature compensation |
-4 mV / cell * K |
Max. wire size | 32 mm 2 |
Length | 185 150 x x 115mm |
Weight | 1.6kg |
temperature range | -40 to +50 ° C |
Type of protection |
Price without VAT
Weight | 1 kg |
---|---|
Brand |
Use in small autonomous and large photovoltaic installations. Main Features The charge regulator for photovoltaics CX40-48 has an LCD graphic display, which displays the charge status of the battery and the charge.
Price without VAT
In stock
Phocos MPPT 100/30
With state-of-the-art maximum power detection technology, Phocos' MPP-Tracker ensures maximum performance from your solar panel at all times and in all weathers. MPPT can yield an energy gain of up to 30% from the photovoltaic generator (with an average gain of 10% -25%).
Price without VAT
In stock
20A 12V / 24V
Solar Charge Regulators
Price without VAT
In stock
Charging regulator 12/24 / 48V 60 / 7A LCD data logger
60A digital programmable with multi-voltage control capability
System Energy Regulators
12V, 24V, 32V, 36V and 48V on one controller
Built-in 30 days data logger
Multifunctional LCD screen
External power sensor (optional)
RS232 interface (optional)
Hybrid control system
Widely programmable
Built-in programmable logic
Four-stage PL charging with algorithm that incorporates real-time pulse amplitude (PWM) constant voltage control gives you complete control of the entire charging cycle. All charging voltages and times are adjustable over a generously wide range. This allows you to customize the charging system to suit exactly any custom requirements that you, your customer, or your battery manufacturer may have. Of course, in most cases, you can choose from one of our default programs, which cover most types of batteries and systems extremely well.
PL has many other tricks up its sleeves as well. It can control generators, night lights, back-up battery charging, many timer applications and much more!
An integrated LCD display shows battery voltage, charging current Ah, inside and out, charge current, battery temperature (with optional sensor) and more. System performance data is available for the previous 30 days. The controller remembers what happened, even if the user can not.
With the optional PLI interface and PLCom software, the user can access all PL funtions from a remote computer. All data can be read and all settings adjusted.
Because PL can operate 12, 24, 32, 36 and 48V systems and can be adjusted to any battery requirements, you can use PL in almost any battery charging job. It may be the only regulator you will ever need to order. (Higher trends Available on special order).
Character:
• Adjustable: All settings are adjustable and are stored in non-volatile memory, so you do not lose your custom set-up if the unit needs to be disconnected from the battery.
Screen: User-friendly LCD screen. Each number has a label.
• Energy Measurement: Daily load and Ah charge plus member of the charge, all recorded for 30 days
• Four Stage regulations: Boost, Absorption, Float and the equation available depending on the type of battery.
• History: Records Charge and Ah Load, Max / Min .. Battery Trends, SOC, and Float Times for the Last 30 Days. You can tell how much energy was actually collected and used. History can be very helpful in diagnosing a system problem.
• Generator Control: An advanced generator controller is included with four different control modes and a quiet time selection.
• Event Control: A powerful event / timer controller allows the load and / or terminal to be general Purpose to turn on / off a wide range of loads (eg pumps, lights, motors, etc.) according to the user a set of conditions is determined.
• Alarm: There is an adjustable high or low alarm output battery which can drive an external alarm device.
• Secondary battery charge: When the main battery bank is full, PL can provide a signal to change a relay so that all or part of the PV input can charge a secondary battery. Secondary battery charge is also controlled.
• Remote control: With the optional PLM remote control display, all functions can access PL from up to 100 meters away. PLM fits into a standard plate light switch.
• Data Comms: Communication with a computer is possible through the optional PLI RS232 port. This allows all data to be downloaded quickly and settings adjusted. Can be used via modem for remote areas etc.
• Protection: Protection against short circuit, reverse flow and lightning. Low battery disconnect load function built in Current limitation in case of overheating or above current. Complete compliant coating protects against corrosion.
External anastomoses: Up to two external branches can be added using optional DC isolated PLS2 shunt adapters. Converter and / or battery charger and other external currents may be included in the Ah and SOC readings.
• Hybrid Systems: If PL is primarily a device for controlling the charge of batteries with photovoltaic panels, it can also be used with other energy sources, such as wind, hydroelectric power and fuel-generators. PL supports series and bypass control. This allows PL to be used in a number of Solar Hybrid system designs. In hybrid systems, the solar cell can be controlled via the solar input terminal, while the secondary power source (wind, hydroelectric) is controlled by the control parallel to the load or general purpose station.
• Available in 20, 40 and 60A Versions: Using the optional PLA multi-control unit, the user can use up to three PL charge regulators together to work on photovoltaic systems up to 180 Amps. PLA provides a common communication interface, four alarms or control channel outputs, as well as control in a separate load control unit (LS1).
Price without VAT
Out of stock
Waterproof / watertight charge regulator IP 67 LS1024EPD 10A PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.
Price without VAT
Out of stock
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
10A Dual Battery PWM charge regulator for 2 batteries.
Feature:
· Two battery charging eliminates the extra cost of two separate solar charging systems
· Intelligent System Optimum Control
· 12 / 24V auto work
· Battery type selection
· Charging frequency optional
· High efficient Series PWM charging
· Local external temperature compensation
· Remote temperature sensor optional
· Use MOSFET as electronic switch, without any mechanical switch
· Remote meter MT-1 optional
· Electronic protection: over charging, short circuit, battery reverse polarity protection
Specification:
Electrical parameters | |
System voltage | 12 / 24VDC Auto work |
Nominal battery current | 10A |
Charge circuit voltage drop | .0.26V |
Discharge circuit voltage drop | .0.15V |
Self consumption | ≤ 6mA |
Working temperature | -35 ℃ to + 55 ℃ |
Humidity | 10% -90% NC |
Enclosure | IP30 |
Port | 4mm2 |
Net weight | 0.15KG |
Price without VAT
Hybrid controller SAC SSWC-06-1224 with Digital Display
PMW technology,
Reinforced circuit.
12V / 24V operation. Automatic Identification System.
Price without VAT
Out of stock
10A, programmable charge regulator with night mode.
Technical data - programming
QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
Price without VAT
Out of stock
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
Price without VAT
Out of stock
Cotek CX1280 Battery Charger - 12V - 80A - 230VAC
Price without VAT
In stock
30A continuous operation and programmable charge regulator.
Price without VAT
Out of stock
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Price without VAT
Out of stock
Charging regulator VS6024BN 60A PWM with programmable screen
Suitable for charging the batteries with current up to 60A (ie with photovoltaic panels with a total power of 1.500Wp at 24V or 750Wp at 12V). It also has a socket for connecting devices, with their automatic shutdown before the battery is completely discharged, thus protecting it from premature wear. The regulator stops charging automatically when the batteries charge.
It has digital screen with indications of the charging status and voltage of the batteries or the output of the panels in Ampere and the possibility of adjusting the charging voltage of the batteries. Shows the battery charge rate, what is the operating voltage while fully programmed.
Price without VAT
Out of stock
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
Available on backorder
10kw with photovoltaics with Canadian Solar 250 watts polycrystalline silicon
It produces an average of 13000kw per year (for areas of Attica and further south) while covering an area of 140 - 160 square meters and 80-100 square meters in tiled roof. It saves 3500-4000 euros per year and depreciates the installation cost in 4.5-5 years.
Out of stock
Out of stock
Photovoltaic panel ECO 200M power 200-205 watts Monocrystalline silicon. Suitable for autonomous PV systems only with the use of high voltage MPPT charging regulators (above 90V D open circuit) .
They have a positive tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency up to + 3% higher efficiency.
Available with 12 years factory warranty and 25 years 80% performance guarantee
Price without VAT
In stock
10kw with photovoltaic Mitsubishi PV-UJ250GA6 (250W) 250 watts polycrystalline silicon
It produces an average of 13000kw per year (for areas of Attica and further south) while it covers an area of 140-160 square meters and 80-100 square meters on a tiled roof. It saves 3500-4000 euros per year and depreciates the installation cost in 4.5-5 years.
Out of stock
Price without VAT
Out of stock
Code: 6261
Handmade necklace made of Swarovski pearls, decorative metal elements and glass beads in white and blue.
Handmade jewelry made of silver and semi-precious stones. Inspired by Angelina. No woman is indifferent in front of a handmade necklace, which sensually frames the neck. Choose handmade necklaces, made of crystals, rings with pearls or stones, from our collection and feel the beauty offered by the highly aesthetic handmade jewelry Angelina's Unique Jewelries.
In stock
Huawei SUN2000 215KTL H3-215k W Three Phase Photovoltaic Inverter. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Out of stock
1100AH (C100) 2V element with an expected life of 12 years
Type | C10 h | C20 h | C72 h | C100 h | C120 h | C240 h | Length | Width | Height | Weight |
10 PVSM 1100 | 810AH | 924AH | 1086AH | 1118AH | 1131AH | 1172AH | 119 mm | 198 mm | 486 mm | 43.8kg |
Price without VAT
Out of stock
225 wp / 24V polycrystalline frames made in Germany. Availability is given for a quantity of more than 10 pieces
Price without VAT
In stock
6.5kwh-7.5kwh / 24v / 220AC - 24V Europe Premium Photovoltaic System (5 year warranty *)
24V Photovoltaics Europe Premium with deep discharge batteries and life expectancy of 10-12 years
System analysis 6.5kwh-7.5kwh (24 hours a day during the summer months).
For a similar performance in Winter, double panels or a 450-500 wind turbine are required. watt
Appliances: Energy class A refrigerator Medium, ECO Medium Washing Machine (up to 1200watt) + Lighting + 8 lamps + TV + small appliances 550wh
4 pcs. Φ/Β panel Solar Energy SE 330 / 330-335 watts Poly / European.
4 pcs. Batteries S. Energy ECOGEL 250 (250AH C20 / 280AH C100) type GEL batteries. (1250 cycles DOD 50%)
1 pc. pure sine wave inverter Phoenix Inverter C 24/2000
2 pcs. Charging regulator ECO ES 150 / 30A programmable 150V with digital display (2 year warranty).
Photovoltaic support bases
Price without VAT
Out of stock
Not a member? Create an account
Already got an account? sign in here