Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 40A / 40A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
Out of stock
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 40A / 40A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
Weight | 1 kg |
---|---|
Brand |
Use in small autonomous and large photovoltaic installations. Main Features The charge regulator for photovoltaics CX40-48 has an LCD graphic display, which displays the charge status of the battery and the charge.
Price without VAT
In stock
Use in small autonomous and large photovoltaic installations. The charge regulator for photovoltaics CX20-48 has an LCD graphic display, which displays the charge status of the battery and the charge, as well as the operation of the photovoltaics.
Price without VAT
In stock
10A, programmable charge regulator with night mode.
Technical data - programming
QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
Price without VAT
Out of stock
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
LS2024EU 20A PWM charge controller with USB
Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 20A / 20A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
In stock
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type | MPPT |
Power (W) | 145 (12V) / 290 (24V) |
Manufacturer | VictronEnergy |
Input voltage (V) | 75 |
Output Voltage (V) | 12/24 |
IP Protection | IP43 (electronic components), IP22 (connection area) |
Weight (kg) | 0.5 |
Warranty (years) | 5 years |
Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
Price without VAT
Out of stock
Specifications
Charge Controller Type | PWM |
---|---|
System Voltage | 12V, 24V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, abortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. In this way your battery is charged in the best way resulting in its much longer life while ensuring the smooth operation of your photovoltaic system. Also the charge regulator BlueSolar PWM-Pro 12 / 24V-5A Victron can be programmed with the help of the integrated BlueSolar Pro remote control panel making it one of the best choices on the market.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Hybrid controller SAC SSWC-06-1224 with Digital Display
PMW technology,
Reinforced circuit.
12V / 24V operation. Automatic Identification System.
Price without VAT
Out of stock
30A continuous operation and programmable charge regulator.
Price without VAT
Out of stock
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Ο charge regulator LS1024EU 10 provides efficient charging by applying the new PWM technology increasing the battery life and improving the performance of the photovoltaic panels of a system · Has MOSFET as electronic switch, without mechanical switch · Provides LED indicators that inform about the voltage status of the battery · Provides control Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
Available on backorder
Out of stock
ECO MPPT ES 150V / 40A charge regulator with the possibility of increasing the efficiency up to 30%
Charging regulators ECO MPPT ES 150 / 40A for autonomous photovoltaic systems have a smart algorithm for detecting the maximum power point of the photovoltaic depending on the sunshine and the temperature, thus maximizing the efficiency of the system up to 30%. Suitable for all types of polycrystalline and monocrystalline silicon panels.
They are real MPPT charging regulators with 150V open circuit input voltage at 40A and not false MPPT-PWM low voltage
They have a digital operating screen and a built-in datalogger
Circuit protections:
· Short circuit protection on the photovoltaic side.
· Discharge protection.
· Overload protection.
· Overload protection.
· Short circuit protection in loads.
· Protection against reverse polarity of photovoltaics.
· Protection against incorrect battery polarity connection.
Character:
MPPT photovoltaic charge regulator power 600W - 12V, 1200W - 24V.
Battery voltage 12V / 24V - 40A, photovoltaic voltage 150V, choice of night mode.
Maximum charging current: 40 A.
System voltage: 12/24 V
Price without VAT
Out of stock
MC4 Female MC4 Solar Connector Female for secure data protection.
Price without VAT
Wind turbine 1000 watt - 1100 watt 24v with maximum power / 1500 watt * max / 24v high quality aluminum and Marine type durability for use near the sea.
Price without VAT
Out of stock
5 PzS 700PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 700Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.
Specifications
Electrical voltage | 2 | |
Capacity (C5) | 700 [AH] | |
Length | 198 [mm] | |
Width | 101 [mm] | |
Height | 688 [mm] | |
Weight | 39.300 [kg] | |
Ind | NO |
Applications
In stock
Provides immediacy and ease of adjustment, suitable for small home autonomous photovoltaic systems up to 160 watts / 12v
Increases battery life and installation performance.
Voltage: 12V
Rated Current: 10A
Maximum battery voltage: 16V
Maximum open circuit voltage of PV panel 30V
Price without VAT
Out of stock
5000W mains converter
Special prices for the purchase of more than 3 pieces
With the Sunny Boy Multi-String Converters you can implement photovoltaic installations in the Middle and Upper Power Range with maximum efficiency.
Price without VAT
Available on backorder
WIND GENERATOR ECO Obm 500final match. WATT MAX
The wind turbine ECO Obm 500 with a maximum power of 550W is a very reliable solution able to ensure you a low bill from the electricity provider or autonomy in cases where the electricity grid is not available. The wind turbine with high quality construction materials and state-of-the-art technologies ECO Obm 500 It can generate electricity even in low wind levels while the 20-month warranty that accompanies it ensures its long-term operation without problems and unwanted interruptions.
General characteristics
State-of-the-art materials for reliable and high quality energy production.
Body made of high quality aluminum lining.
Long service life.
High quality materials.
Tested in extreme weather conditions.
Silent mode.
Low construction weight.
Easy installation and operating instructions.
Out of stock
Wind turbine 450 watt / 12v (16m / sec) or 350 watt / 12v (11m / sec) German Technology, low noise, low start 1.8 M / S and high efficiency.
Includes cotroller.
Price without VAT
Out of stock
Net-metering & Autonomous 10kw with lithium battery – Consists of
24 PV panels 410 watts / Mono half cells SKU: 11550 x 2 sets V-TAC
Three Phase Hybrid On/Off-Grid Inverter 10KW with LCD Display IP65 V-TAC SKU: 11542 V-TAC
LiFePO4 Rack 9.6KWh 48V 200Ah Lithium Battery for Solar Inverter SKU: 11523 V-TAC
Available on backorder
Not a member? Create an account
Already got an account? sign in here