Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
In stock
Weight | 2.3 kg |
---|---|
Brand |
40A - MPPT 1150 Watt 12 / 24V - With aluminum body for better cooling. New generation digital MPPT charge regulator of exceptional specifications of high input voltage up to 150V
Price without VAT
In stock
Price without VAT
In stock
Charging Regulator Victron Blue Solar MPPT 75/50 12V / 24V
Price without VAT
Available on backorder
30A - MPPT 780 Watt 12 / 24V - Digital MPPT charge regulator of exceptional specifications of high input voltage up to 150V DC. Suitable for all types of polycrystalline and monocrystalline silicon panels with total open circuit voltage (Voc) up to 150 VOLT. Reduces losses from 20% -30% by increasing the efficiency of the autonomous photovoltaic system in relation to the simple charge regulators. Ideal controller for use in photovoltaic panels used for interconnected to its network (PPC) systems. The panels are connected in series for maximum efficiency.
Price without VAT
Out of stock
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
Type | MPPT |
Power (W) | 145 (12V) / 290 (24V) |
Manufacturer | VictronEnergy |
Input voltage (V) | 75 |
Output Voltage (V) | 12/24 |
IP Protection | IP43 (electronic components), IP22 (connection area) |
Weight (kg) | 0.5 |
Warranty (years) | 5 years |
Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
10A Dual Battery PWM charge regulator for 2 batteries.
Feature:
· Two battery charging eliminates the extra cost of two separate solar charging systems
· Intelligent System Optimum Control
· 12 / 24V auto work
· Battery type selection
· Charging frequency optional
· High efficient Series PWM charging
· Local external temperature compensation
· Remote temperature sensor optional
· Use MOSFET as electronic switch, without any mechanical switch
· Remote meter MT-1 optional
· Electronic protection: over charging, short circuit, battery reverse polarity protection
Specification:
Electrical parameters | |
System voltage | 12 / 24VDC Auto work |
Nominal battery current | 10A |
Charge circuit voltage drop | .0.26V |
Discharge circuit voltage drop | .0.15V |
Self consumption | ≤ 6mA |
Working temperature | -35 ℃ to + 55 ℃ |
Humidity | 10% -90% NC |
Enclosure | IP30 |
Port | 4mm2 |
Net weight | 0.15KG |
Price without VAT
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 30A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 30A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Cotek CX2425 Battery Charger - 24V - 25A - 230VAC
Price without VAT
In stock
30A continuous operation and programmable charge regulator.
Price without VAT
Out of stock
Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.
Specifications :
Available on backorder
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
Permitted Humidity | max. 98% (not condensing) |
IP Protection | IP30 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 40A / 40A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
Out of stock
10A, programmable charge regulator with night mode.
Technical data - programming
QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
Price without VAT
Out of stock
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
Price without VAT
Out of stock
Its charge regulator Victron Bluesolar PWM Light 48V-10A is compatible with European standards EN60335-1, EMC EN61000-6-1, EN61000-6-3. You do not want to be frustrated if you cannot get the right pitch so invest in a good capo that will extend your life for a while.
Specifications
Manufacturer | VictronEnergy |
---|---|
Charge Controller Type | PWM |
System Voltage | 48V |
Permitted Humidity | max. 95% RF (not condensing) |
IP Protection | IP20 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 100V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Cotek CX1250 Battery Charger - 12V - 50A - 230VAC
Price without VAT
In stock
10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
See all offers here
Available on backorder
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
Net metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
Available on backorder
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
Available on backorder
Net-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Victron MultiPlus 24 / 1600-40-16
The Victron MultiPlus 24/1600-40-16 new type is intended to replace the previous MultiPlus Compact series. It is a powerful true sine wave inverter, a sophisticated battery charger with adaptive charging technology and a high-speed AC transfer switch, all in a single compact housing.
Price without VAT
Available on backorder
Photovoltaic Luxor LX-430M/108 N-Type TopCon MBB (Mono) - German Certification
Suitable for net billing, net-metering, home PV, parks and PV plants
Minimum quantity 12 pieces
In stock
Suitable for photovoltaic roof / net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
Available on backorder
EXTRA-Economic Autonomous Photovoltaic System 1.55KWH - 1.75 kwh
Available on backorder
453AH - 645AH in C10 hour and C120 hour charge cycle, 2V deep discharge batteries
The OPzV series consists of closed-type lead elements that combine proven gel and tubular plate technologies to offer high levels of reliability and performance.
Price without VAT
Available on backorder
Available on backorder
Closed type photovoltaic batteries GEL 2V RES 7 SOPzV 1190Ah / C120 of the Greek company Sunlight is a new economical solution suitable and efficient for energy storage in medium and large autonomous photovoltaic systems.
Capacity:
1190Ah / C120
Dimensions: 198mm x 155mm x 713mm (Height 740mm with poles). Weight 60Kg
Price without VAT.
Available on backorder
Available on backorder
In stock
Not a member? Create an account
Already got an account? sign in here