Mppt 3210A 30A 780 watt charge regulator

119.30 
97.00  Excluding VAT
120.28  Includes VAT

Charging regulator MPPT 30A tracer 3215A with Digital Display model 2016. Maximum power 780 WATT in 24v PV panel

Tracer-A series is based on common positive design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical.

  With MPPT control algorithm, in any situation, products of this series can quickly and accurately track out the best maximum power point (MPP) of photovoltaic array, in order to obtain the maximum solar energy in time, which remarkably improves energy efficiency. There is dual display function: local LCD panel or remote meter (needs extra MT50). With Modbus communication protocol interface, it is convenient for customers to expand applications and monitor in various fields like telecommunication base station, household system, street lighting system, wilderness monitoring system, etc.

  All-round electronic fault self-test function and enhanced electronic protection function could further avoid damages on system components resulting from installation errors or system failures.

 Price without VAT

In stock

  ... people are viewing this right now

  Share

MPPT 30A tracer 3215A charge controller with digital Display. Maximum power 780 WATT in 24v PV panel

Tracer-A series is based on common positive design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical.

  With MPPT control algorithm, in any situation, products of this series can quickly and accurately track out the best maximum power point (MPP) of photovoltaic array, in order to obtain the maximum solar energy in time, which remarkably improves energy efficiency. There is dual display function: local LCD panel or remote meter (needs extra MT50). With Modbus communication protocol interface, it is convenient for customers to expand applications and monitor in various fields like telecommunication base station, household system, street lighting system, wilderness monitoring system, etc.

  All-round electronic fault self-test function and enhanced electronic protection function could further avoid damages on system components resulting from installation errors or system failures.

Model

Tracer1210A

Tracer2210A

Tracer3210A

Tracer4210A

Nominal system voltage

12 / 24V auto work

Rated battery current

10A

20A

30A

40A

Rated load current

10A

20A

30A

40A

Max. PV open circuit voltage

100V

Max. battery voltage

32V

Max. PV input power

130W (12V)

260W (12V)

390W (12V)

520W (12V)

260W (24V)

520W (24V)

780W (24V)

1040W (24V)

Equalize charging voltage

Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V

Boost charging voltage

Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V

Float charging voltage

Gel / Sealed / Flooded: 13.8V

Low voltage reconnect voltage

Gel / Sealed / Flooded: 12.6V

Low voltage disconnect voltage

Gel / Sealed / Flooded: 11.1V

Self-consumption

≤20mA (12V) ≤16mA (24V)

Grounding

Common positive 

temp. compensation

-3mV / ℃ / 2V

Communication Port

RS485 / RJ45 interface

Working temperature

-25℃ to +45 ℃

Storage temperature

-35℃ to +80 ℃

Humidity

≤95% NC

Enclosure

IP30

Overall dimensions

172x139x44mm

172x139x44mm

228x164x55mm

252x180x63mm

Port

4 mm2

10 mm2

10 mm2

10 mm2

Net weight

0.6kg

1.1kg

1.2kg

1.9kg


 Technical data at the following link https://www.epsolarpv.com/en/uploads/news/201512/1449040602756322.pdf 
 
Price without VAT

Features:

Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%

* High quality components, perfecting system performance, with maximum conversion efficiency of 98%.

* Ultra-fast tracking speed and guaranteed tracking efficiency.

* Accurately recognizing and tracking of multiple power points.

* Reliable automatic limit function of maximun PV input power, ensuring no overload under any circumstance.

* Wide MPP operating voltage range.

* 12 / 24VDC automatically identifying system voltage.

* LCD panel display design, dynamically displaying tool's operating data and working condition.

* Multiple load control modes: manual control, light ON / OFF, light On + Timer and test mode.

* Support 3 charging preprogram options: Sealed, Gel, Flooded. 

* Battery temperature compensation function.

* Real-time energy statistics function.

* With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.

* Availble for network module (eBox – 01) with protocol TCP / UDP / SNMP, to realize connection to internet.

* Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.

* Support software upgrade.

Electronic protections:

• PV reverse polarity protection               

• PV short circuit protection

• PV over current alarm protection           

• Battery overcharge protection                

• Battery over discharge protection          

• Battery reverse polarity protection             

• Load short circuit protection                   

• Load overload protection

Figure 1-1 Tracer-A Series Characteristics

1 –Mounting hole sizeΦ5

2 –Select Button

3 –Connection for a RTS (Remote Temperature Sensor) to remotely detect battery temperature.

4 –Solar Module Terminals: Connect solar modules.

5 –Battery Terminals: Connect batteries.

6 –Load Terminals: Connect loads.

7 –RS-485 Port (RJ45 interface): Connect with PC or MT50 to monitor or update firmware.

8 –Product shell

9 –Enter Button

10 - LCD

Technical Specifications

• Electrical Parameters

Description

Parameter

Nominal system voltage

12VDC / 24VDC Auto work

Rated charge current

Tracer4210A 40A

Rated discharge current

Tracer4210A 40A

Battery voltage range

9V to 32V

Max. solar input voltage

100VDC

MPPT voltage range

          VBAT + 2V ~ 90V (Voc. Less than 100V)          

Max. PV input power

Tracer4210A 520W(12V)  1040W(24V)

Self-consumption *

≤20mA (12V) ≤16mA (24V)

Temperature compensate coefficient

-3mV / C / 2V (default)

Communication

RS485 (RJ45 interface)

• Environmental Parameters

                    Environmental               

                               Parameter                                 

LCD temperature range 

-20Cto + 70C

Ambient temperature range

-25Cto + 45C

Storage temperature range

-35C to + 80C

Humidity range

≤95% (NC)

Enclosure

IP30

 

• Mechanical Parameters (Tracer4210A)

                    Mechanical                    

Parameter

Size

                  252mm x 180mm x 63mm                      

Mounting dimension

210mm * 171mm

Mounting hole size

F5

Power cable

10mm2

Weight

2.4kg

Annex I Conversion Efficiency Curves

 Illumination Intensity: 1000W / m2 Temp: 25ºC

  Model: Tracer4210A

    Solar Module MPP Voltage (17V, 34V, 68V) / Nominal System Voltage (12V)

Solar Module MPP Voltage (34V, 68V) / Nominal System Voltage (24V)

Maximum Power Point Tracking Technology

Due to the nonlinear characteristics of solar array, there is a maximum energy output point (Max Power Point) on its curve. Traditional controllers, with switch charging technology and PWM charging technology, can not charge to battery at the maximum power point, so can not harvest the maximum energy available from PV array, but the solar charge controller with Maximum Power Point Tracking (MPPT) Technology can lock on the point to harvest the maximum energy and deliver it to the battery.

The MPPT algorithm of our company continuously compares and adjusts the operating points to attempt to locate the maximum power point of the array. The tracking process is fully automatic and does not require user adjustment.

As the Figure 1-2, the curve is also the characteristic curve of the array, the MPPT technology will 'boost' the battery charge current through tracking the MPP. Assuming 100% conversion efficiency of the solar system, in that way, the following formula is established:

  Normally, the VMp is always higher than VBat. Due to the principle of energy conservation, the IBat is always higher than IPV. The greater the discrepancy between VMp & VBat, the greater the discrepancy between IPV & IBat. The greater the discrepancy between array and battery, the greater the reduction of the conversion efficiency of the system, thus the controller's conversion efficiency is particularly important in the PV system.

  Figure 1-2 is the maximum power point curve, the shaded area is charging range of traditional solar charge controller (PWM Charging Mode), it can obviously diagnose that the MPPT mode can improve the usage of the solar energy resouce. According to our test, the MPPT controller can raise 20% -30% efficiency compared to the PWM controller. (Value may be fluctuating due to the influence of the ambient circumstance and energy loss.)

Figure 1-2 Maximum Power Point Curve

  In actual application, as shading from cloud, tree and snow, the panel maybe appear Multi-MPP, but in actually there is only one real Maximum Power Point. As the following Figure 1-3 shows:

Figure 1-3 Multi-MPPT Curves

  If the program works improperly after appearing Multi-MPPT, the system will not work on the real max power point, which may waste most solar energy resources and seriously affect the normal operation of the system. The typical MPPT algorithm, designed by our company, can track the real MPP quickly and accurately, improve the utilization rate of the array and avoid the waste of resources.

Battery Charging Stage

The controller has a 3 stages battery charging algorithm (Bulk Charging, Constant Charging and Float Charging) for rapid, efficient, and safe battery charging.

 

A) Bulk Charging

In this stage, the battery voltage has not yet reached constant voltage (Equalize or Boost Voltage), the controller operates in constant current mode, delivering its maximum current to the batteries (MPPT Charging). 

 

B) Constant Charging

When the battery voltage reaches the constant voltage setpoint, the controller will start to operate in constant charging mode, this process is no longer MPPT charging, and in the meantime the charging current will drop gradually, the process is not the MPPT charging. The Constant Charging has 2 stages, equalize and boost. These two stages are not carried out constantly in a full charge process to avoid too much gas precipitation or overheating of battery.

C) Boost Charging

The Boost stage maintain 2 hours in default, user can adjust the constant time and preset value of boost voltage according to demand.

The stage is used to prevent heating and excessive battery gassing.

Attention:

1. If your address is remote area by DHL or FedEx, then we will send by other express

2. We can low down some price for less customs duty when shipping, please leave the value of product you want us to declare, otherwise, we will declare by our experience; and we will not bear the high tariff cost, buyer must bear the reponsibility by themselves.

3. The Customers from Brazil please must leave CPF number or CNPJ number, otherwise, the shipping company will refuse the transport;

Connection:

Remote Meter (Model: MT50)

The digital remote meter displays system operating information, error indications, and self-diagnostics. Information displayed on a backlit LCD display is easy to read and large buttons make navigating the meter menus easy. The meter can be flush mounted in a wall or frame. The MT50 (standard edition) is supplied with one 2 meter long cable. The MT50 connects the Tracer-A series with the RJ45 interface.

 

USB Communication Cable and Temperature Sensor Cable:

 
Price without VAT
Weight 1 kg.
Brand

Most viewed products

Recently viewed products

  • -25%Limited
    125AH C20 Semi Traction 186.00 
    139.00  Excluding VAT
    172.36  Includes VAT

    125AH Semi Traction semi-deep discharge batteries for limited use of small autonomous photovoltaic systems. Lifespan in standby (Floating service) 8-10 years and in discharge up to 35% 4-6 years.

    Price without VAT

     

  • -29%LimitedSOLD OUT
    5KW Rec Solar 250wp 6,790.00 
    4,850.00  Excluding VAT
    6,014.00  Includes VAT

    5kw with photovoltaics with REC Solar 250 watt AE Series polycrystalline silicon

    It produces an average of 6500kw per year (for areas of Attica and south) εcovers an area of ​​35-40 square meters on a pergola or 60-80 square meters on a roof. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.


    Price without VAT

     

    Out of stock

  • -32%Limited
    2V ECOPVSM 1400 Deep Discharge Battery, Open type
    2V ECOPVSM 1400 Deep Discharge Battery, Open type 501.00 
    339.00  Excluding VAT
    420.36  Includes VAT

    2V ECOPVSM 1400 Deep Discharge Battery, Open type

    The 2V ECOPVSM 1400 Open Type Deep Charging Battery is an economical and reliable solution for energy storage from small and medium autonomous PV systems. The maximum life time according to the specifications of the manufacturer is 15 years (Design Life under Float Conditions) while it has very high quality characteristics in relation to the most expensive corresponding type and capacity batteries on the market.

    Capacity: 1392Ah / C-100

    Dimensions: 198mm x 174mm x 613mm

    Weight: 58,4 Kgr

    Price without VAT.

  • -26%Limited
    μπαταρία-λιθίου lifepo4-200ah-_EPEVER_LFP12200_256KWH_12V_BATTERY-fotovoltaika
    200Ah-Lithium Battery EPEVER EP-LFP12200 2,56KWH 12V LiFePO4 12,8V with BMS and display 880.00 
    649.00  Excluding VAT
    804.76  Includes VAT

    100Ah-Lithium Battery EcoWatt LiFePO4 12,8V 100Ah 1280Wh with BMS and display for autonomous photovoltaics

    Minimum order 2 pieces. Delivery 5-7 days from France

    Available on backorder

  • -22%Limited
    CLEAN HALF INVERTER 2000Watt 24V DC-Economical 499.00 
    389.00  Excluding VAT
    482.36  Includes VAT

    Pure sine wave INVERTER 2000Watt 24V DCHIP-2000-24v / Economic inverter / DC-AC sine wave output converter 2000W / 24V. Instantaneous load starting current 4000W. Yield> 90%. Low current of the same consumption

    Use in:
    Small Cottages, Caravans, Cars, Boats, Tractors, Trucks, Laptops, Televisions, Power Tools, Office Equipment, & Home Appliances

    1 YEAR WARRANTY

    Price without VAT

    In stock

  • -25%Limited
    Sunlight open type battery
    2 SOPzS 215Ah / C120 2V RES Sunlight battery open type 105.00 
    79.00  Excluding VAT
    97.96  Includes VAT

    The 2v batteries RES 2-SOPzS 215AH / C120   of the company Sunlight, made in Greece, are an economical and reliable solution for energy storage in small and medium autonomous PV systems. The maximum life time according to the specifications of the conveyor1 is 15 years (Design Life under Float Conditions)

    Capacity:

    215Ah / C120

    Dimensions: 198mm x 65mm x 408mm (Height 435 mm with poles

    Price without VAT.

    In stock

  • -24%Limited
    Victron Energy Blue Smart IP67 Charger 12/25 (1+Si) Battery Charger
    Victron Energy Blue Smart IP67 Charger 12/25 (1+Si) Battery Charger 254.43 
    194.16  Excluding VAT
    240.76  Includes VAT

    Victron Energy Blue Smart IP67 Charger 12/25 (1+Si) Battery Charger

    Suitable for any type of battery (Wet, Mf, Vrla, Agm, Gel, Li-Ion). It has Bluetooth functionality to connect to the Victron Connect smartphone app.

    • Input voltage 180 ~ 265VAC
    • Charging voltage 14,2V /14,4V / 14,7V (15,8V Reconditioning)
    • Charging current: 25A

    Available on backorder

  • -25%Limited
    IPG 3000 Vision 2,830.00 
    2,122.00  Excluding VAT
    2,631.28  Includes VAT

    3000 watt mains converter

    Its new network converter Conergyof the series IPGseries sets new data for single-phase network converters. It is the result of many years of experience and know-how Conergy in the development and manufacture of inverters for interconnected photovoltaic systems and meet the highest requirements of efficiency, functionality and design.

     Price without VAT

    In stock

  • -19%Limited
    sung-sg4.0rs-inverter-grid-photovoltaic, prices, specifications, purchase, cost
    SUNGROW SG4.0RS Network Inverter 950.00 
    765.00  Excluding VAT
    948.60  Includes VAT

    Network Inverter SUNG SG4.0RS Single phase converter

    Available on backorder

  • Hematite bead bracelet in silver blue shade 72.00 
    71.28  Excluding VAT
    88.39  Includes VAT

    Code: 7611

    Bracelet made of hematite beads, glass beads and rhinestone beads, in silver blue shade.

    Handmade jewelry made of silver and semi-precious stones. Inspired by Angelina.

    In stock

MPPT CHARGE REGULATOR 30A 3210A EPSOLAR,

MPPT CHARGE REGULATOR 30A 3210A EPSOLAR,

KOSTOS MPPT CHARGING REGULATOR 30A 3210A EPSOLAR

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category