Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
MPPT 30A-100V charge regulator-Tracer 3210CN Epsolar / EPEVER
88.00 € Excluding VAT
109.12 € Includes VAT
MPPT charge regulator 30A-100V Tracer 3210CN Epsolar
MPPT charge regulator 30A-100V Tracer 3210CN Epsolar / EPEVER for autonomous photovoltaic systems.
Operates 390watt / 12v & 780 watt / 24v
Price without VAT
Out of stock
... people are viewing this right now
MPPT charge regulator 30A-100V Tracer 3210CN Epsolar
MPPT charge regulator 30A-100V Tracer 3210CN Epsolar / EPEVER for autonomous photovoltaic systems.
Operates 390watt / 12v & 780 watt / 24v
Character:
• Initial dry contact design, switching of external equipment is achieved
• Multiple dry contact control function, local, remote and crossover
• Multiple dry contact functions: manual control, ON / OFF lighting, ON + timer lighting and time control
• High monitoring efficiency not less than 99,5%
• Maximum conversion efficiency 97,5%, full load efficiency 96%
• Accurate identification and monitoring of multiple power points.
• Battery temperature compensation function
• Real-time operation of energy statistics
• RS485 port with industrial open MODBUS architecture
• Fully programmable operation via computer software
• Support software upgrade
Electronic protections:
• Photovoltaic systems above current protection
• Photocell protection
• Photovoltaic protection with reverse polarity
• Battery voltage protection
• Battery discharge protection
• Battery reverse polarity protection
• Battery overheating protection
• Controller overheating protection
Tracer-CN series
Tracer-CN series adopts common negative, design and advanced MPPT control algorithm, and introduces original dry contact design to
achieve the switch of external equipment. The integration design not only replaces traditional electrical design using external relay, what is
more can achieve multiple control modes and working modes, it can be widely used in household system, field monitoring and communication station etc.
Model fee :
• Tracer3210A 30A, 12 / 24V auto work
:
- Original dry contact design, achieve the switch of external equipment
- Multiple dry contact control mode, local, remote and cross-network
- Multiple dry contact working modes: manual control, light ON / OFF, light ON + timer and time control
- High tracking efficiency no less than 99.5%
- Peak conversion efficiency of 97.5%, full-load efficiency of 96%
- Accurately recognizing and tracking multiple power points.
- Battery temperature compensation function
- Real-time energy statistics function
- RS485 port with industrial standard MODBUS open architecture
- Fully programmable function via PC software
- Support software upgrade
Electronic protection:
• PV over current protection • PV short circuit protection
• PV reverse polarity protection • Battery over voltage protection
• Battery over discharge protection • Battery reverse polarity protection
• Battery overheating protection • Controller overheating protection
Optional accessories :
|
|
RTS300R47K3.81A |
CC-USB-RS485-150U-3.81 |
|
|
|
Remote temperature sensor (3m) |
PC communication cable (1.5m) |
|
|
|
|
|
|
Technical Specifications :
|
Model |
Tracer2210CN |
|
Tracer3210CN |
|
|
|
|
|
||
|
Nominal system voltage |
12 / 24VDC auto work |
|||
|
|
|
|
|
|
|
Rated charging current |
20A |
|
30A |
|
|
|
|
|
|
|
|
Battery input voltage |
9V-32V |
|
||
|
range |
|
|||
|
|
|
|
||
|
Max. PV open circuit |
100V (at minimum operating environment temperature) |
|||
|
voltage |
92V (at 25 ℃ environment temperature) |
|||
|
MPP voltage range |
(Battery voltage + 2V) ～ 72V |
|||
|
|
|
|
|
|
|
Max. PV input power |
260W (12V); 520W (24V) |
|
390W (12V); 780W (24V) |
|
|
|
|
|
|
|
|
Dry contact control range |
30VDC / 1A |
|
||
|
|
|
|
||
|
Communication voltage |
12VDC |
|
||
|
|
|
|||
|
Battery Type |
Sealed (Default) / Gel / Flooded / User |
|||
|
|
|
|
|
|
|
Equalize charging |
Sealed: 14.6V, Flooded: 14.8V, User: 9 ~ 17V |
|||
|
voltage * |
||||
|
|
|
|
||
|
Boost charging voltage * |
Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, User: 9 ~ 17V |
|||
|
|
|
|
|
|
|
Float charging voltage * |
Gel / Sealed / Flooded: 13.8V, |
User: 9 ~ 17V |
||
|
|
|
|
|
|
|
Low voltage reconnect |
Gel / Sealed / Flooded: 12.6V, |
User: 9 ~ 17V |
||
|
voltage * |
||||
|
|
|
|
||
|
Low voltage disconnect |
Gel / Sealed / Flooded: 11.1V, |
User: 9 ~ 17V |
||
|
voltage * |
||||
|
|
|
|
||
|
Self-consumption |
≤20mA (12V); ≤23mA (24V) |
|||
|
|
|
|
|
|
|
Temperature |
-3mV / ºC / 2V |
|
||
|
compensation coefficient |
|
|||
|
|
|
|
||
|
|
|
|||
|
Grounding |
Common negative |
|||
|
|
|
|
|
|
|
Overall dimensions |
173x150x79.9mm |
|
173x163x86mm |
|
|
|
|
|
|
|
|
Power terminals |
8AWG (10mm2) |
|
6AWG (16mm2) |
|
|
Net weight |
1.21kg |
|
1.46kg |
|
|
Enclosure |
IP20 |
|
||
|
|
|
|
|
|
|
Working environment |
-35 ºC ～ + 35 ºC |
|||
|
temperature |
||||
|
|
|
|
||
|
Relative humidity |
≤95% (NC) |
|
||
|
|
|
|
|
|
* Technical data for 12V system at 25 ℃, twice in 24V system.
* Programmable voltage value by PC.
Price without VAT
Related products
Cotek CX2440 Battery Charger - 24V - 40A - 230VAC
495.00 €
379.00 € Excluding VAT
469.96 € Includes VAT
379.00 € Excluding VAT
469.96 € Includes VAT
Cotek CX2440 Battery Charger - 24V - 40A - 230VAC
Price without VAT
In stock
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
22.00 €
19.00 € Excluding VAT
23.56 € Includes VAT
19.00 € Excluding VAT
23.56 € Includes VAT
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-10A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
Specifications
| Charge Controller Type | PWM |
|---|---|
| System Voltage | 12V, 24V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
10A PWM charge regulator LS1024
19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT
11.50 € Excluding VAT
14.26 € Includes VAT
10A, programmable charge regulator with night mode.
Technical data - programming
| QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
| This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
| 4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
| 3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
| LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
| 1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Price without VAT
Out of stock
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
57.00 €
48.00 € Excluding VAT
59.52 € Includes VAT
48.00 € Excluding VAT
59.52 € Includes VAT
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Charging regulator LS1024EU 10A PWM-USB
18.00 €
12.40 € Excluding VAT
15.38 € Includes VAT
12.40 € Excluding VAT
15.38 € Includes VAT
Ο charge regulator LS1024EU 10 provides efficient charging by applying the new PWM technology increasing the battery life and improving the performance of the photovoltaic panels of a system · Has MOSFET as electronic switch, without mechanical switch · Provides LED indicators that inform about the voltage status of the battery · Provides control Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT
43.00 € Excluding VAT
53.32 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
LS2024EU 20A PWM-USB Charging regulator
28.00 €
14.50 € Excluding VAT
17.98 € Includes VAT
14.50 € Excluding VAT
17.98 € Includes VAT
LS2024EU 20A PWM charge controller with USB
Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT
69.00 € Excluding VAT
85.56 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
| Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
Charging Regulator Victron Bluesolar PWM Duo 12 / 24-20A
91.00 €
76.00 € Excluding VAT
94.24 € Includes VAT
76.00 € Excluding VAT
94.24 € Includes VAT
Charging regulator of Victron BlueSolar PWM DUO 12 / 24V-20A includes internal temperature sensor for smooth operation of the regulator. Also with its two outputs it allows the simultaneous charging of batteries. In addition, it includes three stages of battery charging (Bulk, absortion, float), which ensure the maximum charge of the battery, which in turn ensures the smooth operation of your photovoltaic system. The BlueSolar PWM DUO 12 / 24V-20A charge regulator also includes an advanced protection system against short circuits and overvoltages as well as from reverse polarity effects of the solar panels or the battery itself.
Charging Regulator, with 2 outputs for charging Batteries
- PWM controller
- Charges two separate batteries. E.g. the starter battery or the operating battery of the boat or caravan
- Programmable charging current ratio (normal setting: equal current for both batteries)
- Charging voltage regulation of three types of batteries (Gel, AGM and Flooded)
- Internal heat sensor and optional remote control heat sensor
- It is protected from overvoltage
- It is protected against short circuits
- It is protected from reverse polarity of photovoltaic panels and / or batteries.
Price without VAT
Out of stock
Cotek CX1280 Battery Charger - 12V - 80A - 230VAC
679.00 €
499.00 € Excluding VAT
618.76 € Includes VAT
499.00 € Excluding VAT
618.76 € Includes VAT
Cotek CX1280 Battery Charger - 12V - 80A - 230VAC
Price without VAT
In stock
CHARGING REGULATOR PHOCOS CX-4048 24 / 48V - 40A
139.00 €
113.00 € Excluding VAT
140.12 € Includes VAT
113.00 € Excluding VAT
140.12 € Includes VAT
Use in small autonomous and large photovoltaic installations. Main Features The charge regulator for photovoltaics CX40-48 has an LCD graphic display, which displays the charge status of the battery and the charge.
Price without VAT
In stock
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT
25.00 € Excluding VAT
31.00 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
Most viewed products
-
10kW PPC Photovoltaic ECO 545 Solar on roofs
6,800.00 €
5,300.00 € Excluding VAT
6,572.00 € Includes VAT10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
Photovoltaic Eco 545
See all offers here
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT
410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
Net metering 5kW photovoltaic package with 450 watt panels
3,650.00 €
2,750.00 € Excluding VAT
3,410.00 € Includes VATNet metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
-
Net metering 10kW energy offset with PPC
6,700.00 €
5,590.00 € Excluding VAT
6,931.60 € Includes VATNet metering 10kW for energy offset and savings with PPC with production up to 16.600kWh per year
Available on backorder
-
Autonomous photovoltaic package 1.2kWh/24 hours-12v
599.00 €
465.00 € Excluding VAT
576.60 € Includes VATAvailable on backorder
-
Autonomous PV for a holiday home 4,5kWh with air conditioner
2,600.00 €
1,780.00 € Excluding VAT
2,207.20 € Includes VATAutonomous photovoltaic for a 4,5kWh cottage with air conditioning
Available on backorder
-
Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package
17,800.00 €
14,100.00 € Excluding VAT
17,484.00 € Includes VATNet-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Photovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
329.00 €
159.00 € Excluding VAT
197.16 € Includes VATPhotovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
-
5 kwh- 7kwh/24v/220AC – 24V Premium Photovoltaic System
3,750.00 €
2,950.00 € Excluding VAT
3,658.00 € Includes VAT4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
-
Autonomous photovoltaic for caravans or cottages 0,5kWh
630.00 €
495.00 € Excluding VAT
613.80 € Includes VATAvailable on backorder
Recently viewed products
-
Kaco KA BLUEPLANET 15.0 TL3 network inverter for photovoltaics
2,549.00 €
2,035.08 € Excluding VAT
2,523.50 € Includes VATKaco KA BLUEPLANET 15.0 mains inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
-
Photovoltaic 12v Victron Energy Solar Panel 115W-12V Poly
99.00 €
83.00 € Excluding VAT
102.92 € Includes VATPhotovoltaic 12v VictronEnergy Solar Panel 115W-12V Poly
Available upon order from Victron Netherlands within 7-9 working days
In stock
-
Victron Energy Phoenix Smart IP43 Charger 24/25 (3) Battery Charger
585.71 €
450.00 € Excluding VAT
558.00 € Includes VATVictron Energy Phoenix Smart IP43 Charger 24/25 (3)
Victron Phoenix Smart 24/25 IP43 automatic charger-maintainer (3), with 5-year warranty. Suitable for any type of battery (Wet, Mf, Vrla, Agm, Gel, Li-Ion). It has a smart 5-stage algorithm that is designed according to the needs of the ships properties and improves the battery life. It has bluetooth for connection with Victron Connect. It is a modern automatic charger for marine, automotive and industrial applications.
Available on backorder
-
Fronius FR SYMO 12.5-3-M network inverter for photovoltaics
2,850.00 €
2,270.00 € Excluding VAT
2,814.80 € Includes VATFronius FR SYMO 12.5-3-M network inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
-
MPPT Tracer 2215BN 20A 12V-24V Epsolar charge regulator
120.00 €
74.00 € Excluding VAT
91.76 € Includes VATThe Ep Solar MPPT series of charge regulators for autonomous photovoltaic systems has a smart algorithm for detecting the maximum power point of the photovoltaic depending on the sunshine and the temperature, thus maximizing the efficiency of the system by 30%. Suitable for all types of polycrystalline and monocrystalline silicon panels.
Available on backorder
-
Inverter 3000w-Inverter-Charger 3000VA 24v with 50A Charging Regulator
499.00 €
359.00 € Excluding VAT
445.16 € Includes VATInverter 3000w-Inverter-Charger 3000VA 24v with 50A Charging Regulator
The Inverter 3000w-Inverter-Charger 3000VA 24v with 50A Charging Regulator is a cost competitive 3KVA 2400w 24Vdc Off Grid Solar Power Inverter with 50A Solar Charger (charge regulator) and 30A AC Charger-battery charger -
Fronius 900 RI
736.00 €
525.00 € Excluding VAT
651.00 € Includes VATPower: 900W, 2250 / 3sec and Built-in charge regulator 25A LED display
Input voltage (DC): 24V Output voltage (AC): 230V 50Hz
Dimensions: 320x244x120
Weight: 7,5kgprice without VAT
Out of stock
-
Huawei SUN2000 100KTL M1-100k W Three Phase Photovoltaic Inverter
6,700.00 €
5,349.19 € Excluding VAT
6,633.00 € Includes VATHuawei SUN2000 100KTL M1-100k W Three Phase Photovoltaic Inverter. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
-
Photovoltaic EUROPEAN 150 watt -155 watt 12v poly
139.00 €
104.00 € Excluding VAT
128.96 € Includes VATHigh efficiency photovoltaic EUROPEAN 150 watt -155 watt 12v polycrystalline silicon with 12 years factory hardware warranty & 25 years power efficiency guarantee at 80%.
High efficiency
12V DC standard output
CE, TUV junction box
Lifetime: 35 years
Warranty 12 years
90% power 12 years
80% power 25 yearsPrice without VAT
In stock
-
20kw Photovoltaic parks with BP Solar 160 watt '
17,500.00 €
16,000.00 € Excluding VAT
19,840.00 € Includes VAT20 kw (19.800wp) photovoltaic Station with photovoltaic panels of BP solar. Interconnected photovoltaic with PPC.
20kw with PV panels BP 3160N watt polycrystalline silicon.
Provided through European Union certifications, a factory guarantee for the efficiency of the photovoltaic panels (panels) for 25 years for 80%. Shelf life of photovoltaic panels 45-50 years.
Price without VAT
Out of stock
