Lorentz PS150 Boost

1,270.00 
1,089.00  Excluding VAT
1,350.36  Includes VAT

Pump with controler 

Construction & features

Rotary blade mechanism (positive displacement) from forged

brass, carbon-graphite and stainless steel

Tighten the assembly to prevent alignment problems

Handles seawater, dissolved metals

Withstands a lot of freezes

Brushless DC motor (maintenance free) is the same for 12 and 24V

application with the same flow rates

MPP tracking, the existing amplifier for direct solar applications,

Speed ​​control pump, low voltage for the battery Disconnect

protection, Float terminal / remote control switch and low tide

catheter

Installation and Service Manual is extremely detailed and

is displayed

 

Suction capacity

5 meters vertically (20 ft), at sea level. Subtract 1 m for each

1.000 m altitude. Pump should be placed as low as possible and as close as possible

as much as possible in the water source. Absorbent capacity to me

less than intake pipe friction (or clogged filter) Intake

piping should be 1 inch or larger

 

Filter requirement

This pump can not tolerate dirt. The water must be purified.

If the water is very dirty, improve the source or consider a different one

pump

 

PV-Direct (without battery) Requirements

The rated power of the photovoltaic generator must exceed the pump watts

20% or more

A linear current MPPT incl (maximum power point)

monitoring) has already been included

Solar Tracker (optional) will increase daily output (40-55% on

the summer)

 

installation

The pump can be mounted horizontally or vertically.

The pump must not be submerged

Can be mounted inside 120 cm or larger housing,

suspended by a rope

accessory

 

Inline Filter: (10 “) Uses standard filter parts

Installation kit includes: pressure switch, pressure gauge,

control, drain and shut-off valves and TEE tank

Float switch for tank closed if full

Well Drought protection sensor of the pump

 

Dimensions

Pump unit length 33 cm

Βάρος: 7 kg

Controller 260 x 175 x 100 mm

Βάρος: 1,5 kg

 

warranty

1 year from defects in materials and construction

 

Price without VAT

Available on backorder

  ... people are viewing this right now

  Share

Pump with controler 

Construction & features

Rotary blade mechanism (positive displacement) from forged

brass, carbon-graphite and stainless steel

Tighten the assembly to prevent alignment problems

Handles seawater, dissolved metals

Withstands a lot of freezes

Brushless DC motor (maintenance free) is the same for 12 and 24V

application with the same flow rates

MPP tracking, the existing amplifier for direct solar applications,

Speed ​​control pump, low voltage for the battery Disconnect

protection, Float terminal / remote control switch and low tide

catheter

Installation and Service Manual is extremely detailed and

is displayed

 

Suction capacity

5 meters vertically (20 ft), at sea level. Subtract 1 m for each

1.000 m altitude. Pump should be placed as low as possible and as close as possible

as much as possible in the water source. Absorbent capacity to me

less than intake pipe friction (or clogged filter) Intake

piping should be 1 inch or larger

 

Filter requirement

This pump can not tolerate dirt. The water must be purified.

If the water is very dirty, improve the source or consider a different one

pump

 

PV-Direct (without battery) Requirements

The rated power of the photovoltaic generator must exceed the pump watts

20% or more

A linear current MPPT incl (maximum power point)

monitoring) has already been included

Solar Tracker (optional) will increase daily output (40-55% on

the summer)

 

installation

The pump can be mounted horizontally or vertically.

The pump must not be submerged

Can be mounted inside 120 cm or larger housing,

suspended by a rope

accessory

 

Inline Filter: (10 “) Uses standard filter parts

Installation kit includes: pressure switch, pressure gauge,

control, drain and shut-off valves and TEE tank

Float switch for tank closed if full

Well Drought protection sensor of the pump

 

Dimensions

Pump unit length 33 cm

Βάρος: 7 kg

Controller 260 x 175 x 100 mm

Βάρος: 1,5 kg

 

warranty

1 year from defects in materials and construction

 

Price without VAT

Weight 1 kg
Brand

SKU: Lorentz PS150 Boost Categories: ,

Most viewed products

Recently viewed products

Lorentz PS 150 Boost, pump, PUMP, PUMP, pumps,

Lorentz PS 150 Boost, pump, PUMP, PUMP, pumps,

Pump with controller Lorentz PS 150 Boost, with simple installation, without maintenance with high reliability, prices, offers

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category