Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
Available on backorder
SUNG SG33CX: Three Phase Converter Without Transformer
The three-phase interconnector /network inverter SUNGROW SG33CX is ideal for photovoltaic net metering package.
String inverters convert direct current (DC) from your photovoltaic panels to alternating current (AC) that can be supplied to the mains.
String converters are mostly used in domestic and commercial solar projects, such as roof installations, car parks, ground bases and monitoring facilities. Sungrow string inverters are available in the power range between 2,5 kW and 250 kW.
The new SUNGROW SG33CX 33kW solar inverter, a world leader in inverters, is designed exclusively for the commercial market and impresses with its easy installation as well as its high efficiency and reliability.
high performance
Up to 5 MPPT with max. yield 98,7%
Compatible with two-person units
Optional built-in PID recovery function
SMART MANAGEMENT
Easy local and web monitoring via app or web
Exhaust power control with Sungrow energy meter
LOW COST
Compatible with AC Al and Cu cables
The DC 2 in 1 connection is enabled
Q in night mode
SUNGROW SG33CX 33 KW SOLAR PHOTOVOLTAIC INverter IS SMART
Launch without touch and remote firmware upgrade
Online IV curve scan and diagnosis
Safety design with intelligent string current monitoring
Input (DC) | ||
Max. PV input voltage | 1100 V | |
Min. PV input voltage / Start-up input voltage | 200 V / V 250 | |
Nominal PV input voltage | 585 V | |
MPP voltage range | 200 - 1000 V | |
MPP voltage range for nominal power | 550 - 850V | |
No. of independent MPP inputs | 3 4 5 |
|
Max. number of PV strings per MPPT | 2 | |
Max. PV input current | 78A 104A 130A |
|
Max. current for input connector | 30A | |
Max. DC short-circuit current | 120A 160A 200A |
Output (AC) | ||
AC output power | 36.3 kVA @ 40 ℃ / 33 kVA @ 45 ℃ 44 kVA @ 40 ℃ / 40 kVA @ 45 ℃ 55 kVA @ 40 ℃ / 50 kVA @ 45 ℃ |
|
Max. AC output current | A 55.2 A 66.9 83.6A |
|
Nominal AC voltage | 3 / N / PE, 230/400 V | |
AC voltage range | 312 - 528 V | |
Nominal frequency grid / Grid frequency range | 50 Hz / 45 - 55 Hz, 60 Hz / 55 - 65 Hz | |
THD | <3% (at nominal power) | |
DC current injection | <0.5% In | |
Power factor at nominal power / Ajustable power factor | > 0.99 / 0.8 leading - 0.8 lagging | |
Feed-in phases / connection phases | 3 / 3 |
Efficiency | ||
Max. efficiency / European efficiency | 98.6% / 98.3% 98.6% / 98.3% 98.7% / 98.4% |
Protection | ||
DC reverse connection protection | Yes | |
AC short-circuit protection | Yes | |
Leakage current protection | Yes | |
Grid monitoring | Yes | |
DC switch / AC switch | Yes / No | |
PV string current monitoring | Yes | |
Q at night | Yes | |
PID recovery function | Optional | |
Overvoltage protection | DC Type II / AC Type II |
General Data | ||
Dimensions (W * H * D) | 702 * 595 * 310mm 782 * 645 * 310mm 782 * 645 * 310mm |
|
Weight | 50kg 58kg 62kg |
|
Isolation method | Transformerless | |
Degree of protection | IP66 | |
Night power consumption | 2 W | |
Operating ambient temperature range | -30 to 60 ℃ (> 45 ℃ derating) | |
Allowable relative humidity range (non-condensing) | 0 - 100% | |
Cooling method | Smart forced air cooling | |
Max. operating altitude | 4000 m (> 3000 m derating) | |
Display | LED, Bluetooth + APP | |
Communication | RS485 / Optional: Wi-Fi, Ethernet | |
DC connection type | MC4 (Max. 6 mm²) | |
AC connection type | OT or DT terminal (Max.70 mm²) | |
Compliance | IEC 62109, IEC 61727, IEC 62116, IEC 60068, IEC 61683, VDE-AR-N 4105: 2018, VDE-AR-N 4110: 2018, IEC 61000-6-3, EN 50438, AS / NZS 4777.2: 2015, CEI 0-21, VDE 0126-1-1 / A1 VFR 2014, UTE C15-712-1: 2013, DEWA |
|
Grid Support | Q at night function, LVRT, HVRT, active & reactive power control and power ramp rate control |
Made in PRC