Charger Blue Power IP 67 fully protected: waterproof, with protection against vibration and ignition
The Blue Power IP67 charger is not at risk from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.
Stop start
Models with suffix (1 + Si) have a limited second current output which is always supplied if there is a voltage of 180 - 265 VAC at the input. This output can, for example, be used to prevent the vehicle from starting before the battery charger is disconnected (start stop function).
The highest performance ever achieved!
Creating a new standard in the industry: with an efficiency of at least 92%, these chargers have three to four times less heat loss. And once the battery is fully charged, power consumption is reduced to less than 1W, which is about five to ten times better than the industry standard.
Charger Blue Power IP65 fully protected: waterproof, with protection against vibration and ignition. The Blue Power charger is safe from water, oil or dirt. The housing is made of cast aluminum and the electronic components are made of resin molds.
Specifications
Battery System Voltage
12Volt
Battery Charging Current
17A
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Power IP67 Charger. The casing is made of cast aluminum and the electronics are molded in resin.
Start interrupt
The models with suffix (1 + Si) feature a second current limited output which is always powered as long as 180 - 265 VAC is present on the input. This output can for example be used to prevent starting of a vehicle before unplugging the battery charger (start interrupt function).
The highest efficiency ever!
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 4-stage charge algorithm: bulk - absorption - float - storage
The Blue Power Charger features a microprocessor controlled 'adaptive' battery management. The 'adaptive' feature will automatically optimize the charging process relative to the way the battery is being used.
Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V / cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to 'equalize' the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Price without VAT
