Set of 12 pieces (24V) Batteries 7 OPzS 700 2V

3,961.00 
3,047.00  Excluding VAT
3,778.28  Includes VAT

Set of 12 pieces (24V) Batteries 7 OPzS 700 2V

811AH - 1153AH in C10 hour and C120 hour charge cycle, 2V deep discharge batteries

OPzS - Solar series

Unique Reliability and Lifespan

OPzS - Solar permanent accumulators are TUBE low maintenance type, specially designed for

Charging - discharging cycles of high autonomy and safety.

 

Special prices for more than 10 pieces

The price does not include VAT + shipping

Only 2 pieces left in stock.
  ... people are viewing this right now

  Share

811AH - 1153AH in C10 hour and C120 hour charge cycle, 2V deep discharge batteries

Shelf life 13-15 years expectations

Dimensions of 2V Batteries 7 OPzS 700
Length 191 mm
Width 210.00 mm
Height 671.00 mm
Weight 60.00 kg.

Technical Features

OPzS - Solar series

Unique Reliability and Lifespan

OPzS - Solar permanent accumulators are TUBE low maintenance type, specially designed for

Charging - discharging cycles of high autonomy and safety.

These batteries are used as energy storage in renewable energy systems

energy (RES) ie Photovoltaic systems, Wind turbines, Hydroelectric, etc.

They are distinguished for their great endurance in cycles and their long life, even in adverse conditions, such as

those found in Autonomous Photovoltaic and Hybrid RES systems.

OPzS - Solar batteries are manufactured according to international DIN specifications for permanent

"low antimony" OPzS type batteries.

The positive tubular plates have a frame made of a special "low antimony" type lead alloy according to DIN

(Sb <3% is specified). This minimizes the maintenance of the batteries as well

implies low maintenance current and low water consumption, something particularly useful in standalone non-monitored

RES systems.

At the same time the very sturdy tubular plates ensure that, even in cases where autonomy is required

many days, the recovery of capacity with charging is complete.

The OPzS - Solar series meets the requirements of the specifications IEC 60896-11 and IEC 61427 for RES systems.

Construction - Specifications Facilities - Features

Positive tubular type plates (OPzS - DIN), frame All types of installation according to EN 50272-2 are applicable.

low antimony alloy (Sb <3% -Se). Special sharp pedestals are available on request.

Polyester Tubes ● Charging - Unloading

Negative plates Flat type (grid) Charging current can range from 0,1 A to 50 A per 100Ah

Microporous capacitors C120 capacity and maximum charging voltage must be limited

Completely TRANSPARENT container, Styrene-Acryl-Nitrile from 2,35 - 2,40V / item, using a special charging regulator type IU.

(SAN), a very shock-resistant material. Maximum predicted daily discharge not to exceed 25%

SAN cap, gray color capacity C120 (electrolyte stratification limit) or

Electrolyte Sulfuric acid solution, purity by use of the ECS electrolyte agitation system.

DIN 43530 / p.2 ● Resistance to load-discharge CYCLES Poles / Seal Screw pole with copper implant M10 Discharge Depth 80% - cycles> 1500

and special elastic sealing washer. Discharge Depth 60% - cycles> 2000

Tightness is controlled 100% with +0,1 bar Discharge Depth 30% - cycles> 3600

Screw type connections, cast lead bars Discharge Depth 20% - cycles> 4500

insulated from above with plastic or special Maximum recommended allowable discharge: 80% of the nominal.

insulated cables. Screws etc. stainless steel Discharges over 80% do not damage the battery (this

Caps Regular obstructive breathing caps are a key feature of tubular technology (gradual)

the exhaust. Optional: Explosives, however, reduce the capacity if no equalizing charge follows.

Operating temperature Permissible limits: -20 ° C… + 55 ° C

Product standardization DIN 40736 / p1 - 2V elements monitoring and addition of deionized water.

DIN 40737 / p3 - Batteries 6 & 12V ● Self-discharge

IEC 60896-11 test standardization If the battery is not charging, its self-discharging

IEC 61427 especially for RES systems is less than 3% / month at 20ºC, without humidity.

OPzS Batteries are powerful energy storage solutions, with proven technology that has
have been used for decades in applications that require a safe and reliable long-lasting battery
of life. OPzS batteries are distinguished by their high tolerance
cycling and long life in parallel mode. They have been designed and built
according to the Standards DIN.

Specifications

Compliance with DIN 40736 -1 & 2, DIN 40737-3 and EN 50272-2
Optimized slab design delivers capabilities in excess of DIN rated values
Minimal maintenance due to reduced antimony content and large electrolyte
reserve volume

Excellent circular and deep discharge performance
Available in 2V, 6V and 12V monoblock components
Delivery on dry charged or wet conditions
Protected pole with PP
Special design pole for high current applications
"Long life" EUROBAT classification
Applications
Telecommunications
Control and monitoring systems in power stations and distribution stations
Railway, airport and port signaling
Emergency lighting
Data processing systems
UPS
Renewable energy systems (solar, wind, hydroelectric)

Positive plates
OPzS cells are made with tubular positive plates. The tubular
Slate design is well proven and known for its high reliability and long service life
floating charging function. The dish composition of a special low antimony (≤ 1,65%
Sb) and aluminum selenium, the results in a fine-grained structure and low corrosion rate, a
key property for obtaining a long cell life and high reliability.

Negative plaques
The negative plates are made with the design of the network. In this case a lead alloy
with 5% antimony content is used. In order for the plates to retain porosity
the active mass, some special ingredients are added to the paste, allowing the plates
to maintain their "spongy" consistency.
Separators
The separators are made of microporous PVC, a high porosity material,
low electrical resistance and high acid resistance. The separators are permeable and
allows ions to migrate during the charging and discharging process of the battery.
Thus, the migration of solid particle between the plates is prevented and any small one
circuit is avoided. The design of the separators also allows the presence of more acid
in the wider area of ​​the plates.

Connections
A wide variety of flexible and solid copper fasteners used to connect the
the cells. Voltage measurements are permissible due to bolt-on type design.
Caps
The plugs are flame retardants made of ceramic material, improving safety
of the cell.

The electrolyte
The specific gravity of the electrolyte from a fully charged cell is 1.240 (·} 0.010 kg / l) at 20 · · C
at maximum and 1,260 (·} 0.010 kg / l) at 20 · · C at minimum. At different temperatures,
outside the range +10 · · C to +30 C · · the temperature compensation set
to be entered are · ,0,0007 XNUMX kg / l for each · · variation C.
The freezing point of the electrolyte:
A fully charged cell is -45 · · C (reference acid specific gravity 1.240 kg / l).
A fully discharged cell is -5 · · C to -10 · · C (reference acid specific gravity 1.100 kg / l).

Containers telephones and covers
Styrene acrylonitrile (SAN) is used in container OPzS cells. SAN
is transparent allowing the user an easy reading of the electrolyte level and optics
cell inspection. Acrylonitrile cell covers
copolymer (ABS).

Many
Specially designed safety poles, effectively prevent acid leakage and pillar corrosion
thus increasing battery life.
Mechanical Constructions
1. negative plate
2. Tubular positive plate
3. Set of positive plate tubes with bridge terminal
4. Definition of negative grid plates with bridge terminal
5. Assembly plate set
6. cell container
7. cell lid
8. Pole security

Special prices for more than 10 pieces

The price does not include VAT + shipping

Weight 1 kg.
Brand

SKU: Set of 12 pieces (24V) Batteries 7 OPzS 700 2V Category: 

Most viewed products

Recently viewed products

  • -15%Limited
    For Photovoltaic 60A charge regulator with digital display. Covers 1520 watts / 24v in 24V photovoltaic panels and 760 Watts in 12v PV panels
    For Photovoltaic 60A charge regulator with digital display. Covers 1520 watts / 24v in 24V photovoltaic panels and 760 Watts in 12v PV panels
    60A digital charging regulator with LCD & usb screen 110.00 
    94.00  Excluding VAT
    116.56  Includes VAT

    New Series 60A Digital Solar Charger with Liquid Crystal Display for photovoltaic panels up to 760 watt / 12v or up to 1520watt / 24v Polycrystalline

    In stock

  • -29%LimitedSOLD OUT
    5kw Photovoltaic BP Solar 230wp 6,790.00 
    4,850.00  Excluding VAT
    6,014.00  Includes VAT

    5kw with photovoltaics with BP Solar 230 watts polycrystalline silicon

    It produces an average of 6500kw per year (for areas of Attica and south) while it covers an area of ​​35-40 square meters on a pergola or 60-80 square meters on a roof. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.

    Price without VAT

    Out of stock

  • -20%Limited
    Photovoltaic Victron Energy 175W-12V Mono 1485x668 × 30mm series 4a
    Photovoltaic Victron Energy 175W-12V Mono 1485 × 668 × 30mm series 4a 165.00 
    132.00  Excluding VAT
    163.68  Includes VAT

    Photovoltaic VictronEnergy
    175W-12V Mono 1485 × 668 × 30mm series 4a

    Available upon order from Victron Netherlands within 7-9 working days

    In stock

  • -22%Limited
    Lorentz PS600 BADU 1,277.00 
    999.00  Excluding VAT
    1,238.76  Includes VAT

    Pump with controller

    survey

    centrifugal pump surface for solar operation

     

    flow rate up to 15 m3 / h

     

    simple installation

     

    maintenance-free thanks to the brushless DC motor

     

    high reliability and life expectancy

     

    cost-effective pumping

     

    2-year manufacturer's warranty against defects in material and workmanship

     

     

    Applications

    pool water circulation through a filter system and thermal collectors

     

    management pond

     

    irrigation

     

    aquariums

     

    etc.

     

    Pump end (PE) Top BADU 12

    monoblock type pump with integrated strainer tank

     

    under mechanical seal is mounted on a plastic shaft protected sleeve

     

    motor / shaft pump has no contact with the fluid

     

    total electrical separation

     

    strainer about capacity. 3 L

     

    strainer basket size approx. 3,2 x 2,6 mm

     

     

    The material used for the end of the pump

    pump housing, strainer basket: PP

     

    flange, housing gland: PP TV 40

     

    diffuser: PP TV 40

     

    impeller: PA 66 GF 30 / PC

     

    lid: PC, transparent

     

    mechanical seal: carbon / ceramic / NBR

     

    screws: steel, galvanized

     

     

    Engine ECdrive 600 BADU Top

    brushless, DC motor maintenance

     

     

    Controller PS600

    control of the pump system and monitoring of operating conditions

     

    mounted on the surface (not immersed electronics)

     

    two control inputs for better pumping (protection against dry operation), float or pressure switches, remote control, etc.

     

    automatic reset 20 minutes later and catheter turns pump

     

    are protected from reverse polarity, overload and high temperature

     

    speed control, max. pump speed adjustable to reduce the flow rate approx. 30%

     

    Solar Power: Integrated MPPT (Maximum Power Point Tracking)

     

    Battery operation: low voltage disconnect and restart when the battery recovers

     

    max. 92% efficiency (engine + controller)

    Price without VAT

    Available on backorder

  • -32%Limited
    SET Photovoltaic Panel Mono 410W 12 pieces V-TAC 11549
    SET Photovoltaic Panel Mono 410W 12 pieces V-TAC 11549 1,819.00 
    1,236.00  Excluding VAT
    1,532.64  Includes VAT

    SET Photovoltaic Panel Mono 410W 12 pieces V-TAC 11549

    Output 410W

    Dimensions 1722 x 1134 x 35mm

    Minimum SET purchase quantity 

    In stock

  • -33%Limited
    SET Photovoltaic Panel Mono 450W 31 pieces V-TAC 1135331
    SET Photovoltaic Panel Mono 450W 31 pieces V-TAC 1135331 5,355.00 
    3,565.00  Excluding VAT
    4,420.60  Includes VAT

    SET Photovoltaic Panel Mono 450W 31 pieces V-TAC 1135331

    Output 450W

    Dimensions 2094 x 1038 x 35mm

    Minimum SET purchase quantity 

    In stock

  • -34%Limited
    SET Photovoltaic Panel Mono 410W black 31 pieces 12.71kW V-TAC 1151931 half-cells
    SET Photovoltaic Panel Mono 550W 31 pieces V-TAC 1183131 6,500.00 
    4,309.00  Excluding VAT
    5,343.16  Includes VAT

    17kw / (17.050 watts) SET Photovoltaic Panel Mono 550W 31 pieces V-TAC 1183131

    Minimum SET purchase quantity 

    In stock

  • -49%Limited
    Photovoltaic Panel V-TAC 11519 410W Monocrystalline
    410W Photovoltaic Panel V-TAC 11519 Monocrystalline half-cells-Black frame 233.00 
    119.00  Excluding VAT
    147.56  Includes VAT

    Photovoltaic Panel V-TAC 11519 410W Monocrystalline half-cells

    Output 410W

    Dimensions 1722mm x 1134mm x 30mm

    Minimum purchase quantity 12 pieces

    In stock

  • -17%Limited
    European Autonomous photovoltaic 17kwh/24v
    European Autonomous photovoltaic 17kwh / 24v + 2V 740AH batteries and Victron Multiplus 5000VA for permanent homes 6,800.00 
    5,650.00  Excluding VAT
    7,006.00  Includes VAT

    European Autonomous photovoltaic 17kwh/24v + 2V 740AH batteries and Victron Multiplus 5000VA for permanent residences (per 24 hours in the summer months) – Indicative system for small permanent residences

    Available on backorder

  • 3 PzS 465PB 2V Deep discharge SUNLIGHT battery 206.00  Excluding VAT
    255.44  Includes VAT

    3 PzS 465PB 2V Deep discharge SUNLIGHT battery. Traction battery - open type with liquids, 465Ah (C5), with 2500 cycles at 50% DOD and with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily energy to your industrial or commercial vehicles.

     

    Specifications  

    Electrical voltage 2
    Capacity (C5) 465 [AH]
    Length 198 [mm]
    Width 65 [mm]
    Height 713 [mm]
    Height with poles 740 [mm]
    Weight 26.000 [kg]
    Ind NO

    In stock

Set of 12 pieces (24V) Batteries 7 OPzS 700 2V,

Set of 12 pieces (24V) Batteries 7 OPzS 700 2V,

Set of 12 pieces (24V) Batteries 7 OPzS 700 2V at the lowest cheapest price on the market

My cart
Close Wishlist
Close Recently Viewed
Compare Products (0 Products)
Compare Products
Compare Products
Compare Products
Compare Products
Category