Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
20A Solar Charger PWM LS2024
13.50 € Excluding VAT
16.74 € Includes VAT
20A continuous operation and max 25A charge regulator programmable for use even in lighting columns, garden lights with night operation capability.
Technical analysis
Solar charge controller for street light
Dual timer function
Battery type selection
Full electronic protection
Solar charge controller
1. Intelligent system optimum controller
2. High efficient series PWM charging with temperature compensation
3. Compact size
4. Use mosfet as electronic switch, without any mechanical switch
5. Digital LED menu, only one key solve all setting simple
6. Widely used, automatically recognize day / night
7. Intelligent timer function with 1-15 hours option
8. Unique dual timer function, enhance the flexibility of street light system.
9. Gel, sealed and flooded battery type option
10. Load status display
11. Big terminals and big distance between terminals
12. Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
13. Reverse polarity protection: Any combination of solar module and battery
14. Load work mode: Light on + dual timer, dusk to dawn, test, on / off
Model LS2024R
Rated Current 20A
System Voltage 12 / 24V auto work
Over Load Protection 1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds
Short Circuit Protection 3.5 times of rated current
Self-consumption Max. 6mA
Working Temperature -35'C to + 55'Cindustrial
Equalize Charging Voltage 14.6V; X2 / 24V
Boost Charging Voltage 14.4V; X2 / 24V
Float Charging Voltage 13.8V; X2 / 24V
Boost Reconnect Charging Voltage 13.2V; X2 / 24V
Temperature Compensation -30mV / 'C / 12V
Under Voltage Warning Voltage 12.0V; X2 / 24V
Low Voltage Disconnect Voltage 11.1V; X2 / 24V
Low Voltage Reconnect Voltage 12.6V; X2 / 24V
Terminals 10mm2
Enclosure IP30
| Model | LS2024R | ||
Rated Current |
20A | ||
System Voltage |
12 / 24V auto work | ||
Over Load Protection |
1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds |
||
Short Circuit Protection |
3.5 times of rated current |
||
Self-consumption |
Max. 6mA |
||
Working Temperature |
-35 ° C to + 55 ° C industrial |
||
Equalize Charging Voltage |
14.6V; x2 / 24V | ||
Boost Charging Voltage |
14.4V; x2 / 24V | ||
Float Charging Voltage |
13.8V; x2 / 24V | ||
Boost Reconnect Charging Voltage |
13.2V; x2 / 24V | ||
Temperature Compensation |
-30mV / ° C / 12V | ||
Under Voltage Warning Voltage |
12.0V; x2 / 24V | ||
Low Voltage Disconnect Voltage |
11.1V; x2 / 24V | ||
Low Voltage Reconnect Voltage |
12.6V; x2 / 24V | ||
terminals |
10 mm 2 | ||
Price without VAT |
IP30 | ||
Out of stock
... people are viewing this right now
20A continuous operation and max 25A charge regulator programmed in black or white for use even in lighting columns, garden lights with night operation. It has a PWM microprocessor for more efficient and smoother charging. It has a light sensor and a timer. It includes connectors for devices that are programmed to operate at night while at the same time they are switched off according to the respective programming.
Technical analysis
Solar charge controller for street light
Dual timer function
Battery type selection
Full electronic protection
Solar charge controller
1. Intelligent system optimum controller
2. High efficient series PWM charging with temperature compensation
3. Compact size
4. Use mosfet as electronic switch, without any mechanical switch
5. Digital LED menu, only one key solve all setting simple
6. Widely used, automatically recognize day / night
7. Intelligent timer function with 1-15 hours option
8. Unique dual timer function, enhance the flexibility of street light system.
9. Gel, sealed and flooded battery type option
10. Load status display
11. Big terminals and big distance between terminals
12. Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
13. Reverse polarity protection: Any combination of solar module and battery
14. Load work mode: Light on + dual timer, dusk to dawn, test, on / off
Model LS2024R
Rated Current 20A
System Voltage 12 / 24V auto work
Over Load Protection 1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds
Short Circuit Protection 3.5 times of rated current
Self-consumption Max. 6mA
Working Temperature -35'C to + 55'Cindustrial
Equalize Charging Voltage 14.6V; X2 / 24V
Boost Charging Voltage 14.4V; X2 / 24V
Float Charging Voltage 13.8V; X2 / 24V
Boost Reconnect Charging Voltage 13.2V; X2 / 24V
Temperature Compensation -30mV / 'C / 12V
Under Voltage Warning Voltage 12.0V; X2 / 24V
Low Voltage Disconnect Voltage 11.1V; X2 / 24V
Low Voltage Reconnect Voltage 12.6V; X2 / 24V
Terminals 10mm2
Enclosure IP30
| Model | LS2024R | ||
Rated Current |
20A | ||
System Voltage |
12 / 24V auto work | ||
Over Load Protection |
1.25 times of rated current for 60 seconds, or 1.5 times for 5 seconds |
||
Short Circuit Protection |
3.5 times of rated current |
||
Self-consumption |
Max. 6mA |
||
Working Temperature |
-35 ° C to + 55 ° C industrial |
||
Equalize Charging Voltage |
14.6V; x2 / 24V | ||
Boost Charging Voltage |
14.4V; x2 / 24V | ||
Float Charging Voltage |
13.8V; x2 / 24V | ||
Boost Reconnect Charging Voltage |
13.2V; x2 / 24V | ||
Temperature Compensation |
-30mV / ° C / 12V | ||
Under Voltage Warning Voltage |
12.0V; x2 / 24V | ||
Low Voltage Disconnect Voltage |
11.1V; x2 / 24V | ||
Low Voltage Reconnect Voltage |
12.6V; x2 / 24V | ||
terminals |
10 mm 2 | ||
Price without VAT |
IP30 | ||
| Weight | 1 kg |
|---|---|
| Brand |
you may also like...
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
57.00 €
48.00 € Excluding VAT
59.52 € Includes VAT
48.00 € Excluding VAT
59.52 € Includes VAT
Victron BlueSolar PWM Light 48V / 20A - PWM 20A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. The BlueSolar PWM-Light 48V controller also includes a socket for connecting devices, automatically shutting down before the battery is completely discharged, thus protecting it from premature wear. With PWM technology system provides three-stage charging (Bulk, absortion, float). This way your battery is charged in the best way resulting in a much longer lifespan of itself and your system! Provides protection against short circuits and overvoltages as well as reverse polarity of solar panels or the battery.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics
19.00 €
16.00 € Excluding VAT
19.84 € Includes VAT
16.00 € Excluding VAT
19.84 € Includes VAT
Victron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-5A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 5A |
| Standby Self-Consumption | 10mA |
| Battery Voltage | 12V, 24V |
| Load Current max. | 5A |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 5A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT
43.00 € Excluding VAT
53.32 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT
25.00 € Excluding VAT
31.00 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
Related products
Charging regulator LS1024EU 10A PWM-USB
18.00 €
12.40 € Excluding VAT
15.38 € Includes VAT
12.40 € Excluding VAT
15.38 € Includes VAT
Ο charge regulator LS1024EU 10 provides efficient charging by applying the new PWM technology increasing the battery life and improving the performance of the photovoltaic panels of a system · Has MOSFET as electronic switch, without mechanical switch · Provides LED indicators that inform about the voltage status of the battery · Provides control Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
22.00 €
19.00 € Excluding VAT
23.56 € Includes VAT
19.00 € Excluding VAT
23.56 € Includes VAT
Victron BlueSolar PWM-Light 12 / 24V-10A - PWM 10A Charging Regulator for Photovoltaics
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-10A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
Specifications
| Charge Controller Type | PWM |
|---|---|
| System Voltage | 12V, 24V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM Light 48V / 30A - PWM 30A Charging Regulator for Photovoltaics
66.00 €
56.00 € Excluding VAT
69.44 € Includes VAT
56.00 € Excluding VAT
69.44 € Includes VAT
Victron BlueSolar PWM Light 48V-30A - PWM 30A Charging Regulator for Photovoltaics
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines
48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT
41.00 € Excluding VAT
50.84 € Includes VAT
Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
| Type | MPPT |
| Power (W) | 145 (12V) / 290 (24V) |
| Manufacturer | VictronEnergy |
| Input voltage (V) | 75 |
| Output Voltage (V) | 12/24 |
| IP Protection | IP43 (electronic components), IP22 (connection area) |
| Weight (kg) | 0.5 |
| Warranty (years) | 5 years |
| Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
Cotek CX2425 Battery Charger - 24V - 25A - 230VAC
349.00 €
279.00 € Excluding VAT
345.96 € Includes VAT
279.00 € Excluding VAT
345.96 € Includes VAT
Cotek CX2425 Battery Charger - 24V - 25A - 230VAC
Price without VAT
In stock
10A PWM charge regulator LS1024
19.00 €
11.50 € Excluding VAT
14.26 € Includes VAT
11.50 € Excluding VAT
14.26 € Includes VAT
10A, programmable charge regulator with night mode.
Technical data - programming
| QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
| This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
| 4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
| 3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
| LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
| 1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Price without VAT
Out of stock
Cotek CX2440 Battery Charger - 24V - 40A - 230VAC
495.00 €
379.00 € Excluding VAT
469.96 € Includes VAT
379.00 € Excluding VAT
469.96 € Includes VAT
Cotek CX2440 Battery Charger - 24V - 40A - 230VAC
Price without VAT
In stock
Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics
44.00 €
37.00 € Excluding VAT
45.88 € Includes VAT
37.00 € Excluding VAT
45.88 € Includes VAT
Victron BlueSolar PWM Light 12 / 24V-30A - PWM 30A Charging Regulator for Photovoltaics
Charging regulator of Victron BlueSolar PWM Light 12 / 24V-30A includes internal temperature sensor. It consists of three stages of battery charging (Bulk, abortion, float), has an advanced protection system against short circuits and over-voltages.
Specifications :
- Battery Voltage: 12 / 24V (Automatic selection)
- Night mode (details in the Remote Panel manual)
- Rated charging current: 30 A
- Second battery output: not available
- Automatic load disconnection: Yes (maximum load 30A)
- Maximum input voltage of PV panel: 28V / 55V
- Self-consumption: <10mA
- Protection: battery reverse polarity, short circuit, overheating
- Operating temperature range -20 to +50 C
- Absorption charge (default): 14.4V (12V) / 28.8V (24V)
- Float charge (default): 13.8V (12V) / 27.6V (24V)
- Equalization charge (default): 14.6V (12V) / 29.2V (24V)
- Load disconnection voltage (default): 11.1V (12V) / 22.2V (24V)
- Load reconnection voltage (default): 12.6V (12V) / 25.2V (24V)
- Protection class (dust-humidity): IP 30
- Dimensions: 138x70x37 mm
- Warranty: 5 Years
Available on backorder
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
81.00 €
69.00 € Excluding VAT
85.56 € Includes VAT
69.00 € Excluding VAT
85.56 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-30A - PWM Charging Regulator (12 / 24V) 30A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
General characteristics:
- The BlueSolar PWM -Pro 12 / 24V-30A charge controller is ready for use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Programmable with night mode
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
| Supported Battery Types | Bleisäure, AGM, Gel |
Available on backorder
LS2024EPD 20A PWM Charging regulator waterproof
42.00 €
29.90 € Excluding VAT
37.08 € Includes VAT
29.90 € Excluding VAT
37.08 € Includes VAT
Waterproof / watertight charge regulator IP 67 LS2024EPD 20A PWM technology. Suitable for lighting columns, garden lights, yachts, yachts and generally for outdoor use with protection from moisture.
Price without VAT
In stock
LS2024EU 20A PWM-USB Charging regulator
28.00 €
14.50 € Excluding VAT
17.98 € Includes VAT
14.50 € Excluding VAT
17.98 € Includes VAT
LS2024EU 20A PWM charge controller with USB
Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
10A Economy Charger regulator for photovoltaic systems
19.00 €
14.00 € Excluding VAT
17.36 € Includes VAT
14.00 € Excluding VAT
17.36 € Includes VAT
10A regulator Charger Economy series for small autonomous photovoltaic systems.
- 10A battery charger for photovoltaic frame 12v 160 watt
- With program number display and load connection output with night mode scheduling.
- Suitable for 12V or 24V batteries (automatic selection).
- Provides overload protection up to 130% of maximum load for 60s and 160% of maximum load for 5sec.
- Maximum input voltage 41V.
- Maximum voltage drop during charging 0,2V.
- Maximum operating current 10A.
- Warranty: 14 months.
Price without VAT
Out of stock
Most viewed products
-
10kW PPC Photovoltaic ECO 545 Solar on roofs
6,800.00 €
5,300.00 € Excluding VAT
6,572.00 € Includes VAT10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
Photovoltaic Eco 545
See all offers here
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
Net metering 5kW photovoltaic package with 450 watt panels
3,650.00 €
2,750.00 € Excluding VAT
3,410.00 € Includes VATNet metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
-
Net metering 10kW energy offset with PPC
6,700.00 €
5,590.00 € Excluding VAT
6,931.60 € Includes VATNet metering 10kW for energy offset and savings with PPC with production up to 16.600kWh per year
Available on backorder
-
Autonomous photovoltaic package 1.2kWh/24 hours-12v
599.00 €
465.00 € Excluding VAT
576.60 € Includes VATAvailable on backorder
-
Autonomous PV for a holiday home 4,5kWh with air conditioner
2,600.00 €
1,780.00 € Excluding VAT
2,207.20 € Includes VATAutonomous photovoltaic for a 4,5kWh cottage with air conditioning
Available on backorder
-
Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package
17,800.00 €
14,100.00 € Excluding VAT
17,484.00 € Includes VATNet-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Photovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
329.00 €
159.00 € Excluding VAT
197.16 € Includes VATPhotovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
-
5 kwh- 7kwh/24v/220AC – 24V Premium Photovoltaic System
3,750.00 €
2,950.00 € Excluding VAT
3,658.00 € Includes VAT4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
-
Autonomous photovoltaic for caravans or cottages 0,5kWh
630.00 €
495.00 € Excluding VAT
613.80 € Includes VATAvailable on backorder
Recently viewed products
-
Battery Victron 12V/200Ah AGM Telecom (M8)
572.00 €
462.81 € Excluding VAT
573.88 € Includes VATBattery Victron 12V/200Ah AGM Telecom (M8)
Victron 12V/200Ah AGM Telecom battery (M8) designed for telecommunication applications. Excellent "space saver" for marine and vehicle applications.
Available on backorder
-
Autonomous PV 7,5kWh with 12v 4 batteries 250AH C100 + Inverter
3,350.00 €
2,690.00 € Excluding VAT
3,335.60 € Includes VATAvailable on backorder
-
Inverter V-TAC On-Grid Inverter 5000W 11370 Single-phase with LCD display
713.00 €
557.00 € Excluding VAT
690.68 € Includes VATInverter V-TAC On-Grid Inverter 5000W Single Phase with LCD Display 11370
With order delivery within 2-4 working days.
Available on backorder
-
Sanyo Panasonic photovoltaic panel 214 watts
395.00 €
248.00 € Excluding VAT
307.52 € Includes VATSanyo Panasonic 214 Watt high efficiency photovoltaic.
SANYO - SOLARMODULE
HIT - 215 NKHE5
HIT - 214 NKHE5
HIT - 210 NKHE5
SANYO HIT® (Heterojunction with Intrinsic Thin layer) photovoltaic cells consist of two layers of amorphous silicon (top and bottom) and a layer of monocrystalline silicon. PV panels offer top performance and value using advanced technology production techniques.
Higher Yield
HIT® cells and panels have a very high degree of photoconversion efficiency in mass production.
Type Φ / Element hive Φ / Βστοιχείου HIP-215NKHE5 Present in several = 19.3% Present in several = 17,1% HIP-214NKHE5 Present in several = 19.2% Present in several = 17,0% HIP-210NKHE5 Present in several = 18,9% Present in several = 16.7% Environmentally friendly photovoltaic cells
More Clean Energy
HIT®s produce more clean energy than other conventional photovoltaic cells.
Special characteristics
SANYO HIT photovoltaic panels have no emissions, do not consist of common parts and are silent. HIT PV panels save space on the premises and achieve maximum power values on a given roof.
Module type HIT-215NKHE5 / HIT-214NKHE5 / HIT-210NKHE5
Electrical components 215NKHE5 214NKHE5 210NKHE5 Rated Power (Pmax) [W] 215 214 210 Voltage, max. (Vpm) [V] 42,0 41,9 41,3 Voltage, max. (lpm) [A] 5,13 5,12 5,09 Voltageless load (Voc) [V] 51,6 51,5 50,9 Short-circuit current (Isc) [A] 5,61 5,60 5,57 Guaranteed minimum power (Pmin) [W] 204,3 203,3 199,5 Hypertension protection, max. [A] 15 15 15 Tolerance [%] + 10 / -5 + 10 / -5 + 10 / -5 System voltage, max. (Vdc) [V] 1000 1000 1000 Temperature coefficient Pmax [% / ° C] -0,30 -0,30 -0,30 Temperature coefficient (Voc) [V / ° C] -0,129 -0,129 -0,127 Temperature coefficient (lsc) [mA / ° C] 1,68 1,68 1,67 PANASONIC extends the warranty up to 10 years
Minimum order 12 pieces
Unit price without VAT
In stock
-
Victron SmartSolar MPPT 250/100-Tr - MPPT Photovoltaic Charging Regulator 100A 654.00 € Excluding VAT
810.96 € Includes VATVictron SmartSolar MPPT 250/100-Tr – MPPT Charge Controller 250V Dc / 100A Solar
Advanced finding of optimal power efficiency in case of partial shading
Victron battery charge regulators, thanks to the rapid detection of maximum power point (MPPT) technology from photovoltaic panels, even in shady conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, guided by the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
Available on backorder
-
2V ECOPVSM 740 Deep Discharge Battery, Open type
283.00 €
189.00 € Excluding VAT
234.36 € Includes VAT2V ECOPVSM 740 Deep Discharge Battery, Open type
The 2V ECOPVSM 740 Deep Discharge Battery, open type is an economical and reliable solution for energy storage from small and medium autonomous PV systems. The maximum life time according to the specifications of the manufacturer is 15 years (Design Life under Float Conditions) while it has very high quality characteristics in relation to the most expensive corresponding type and capacity batteries on the market.
Capacity: 725Ah / C-100
Dimensions: 198mm x 101mm x 613mm
Weight: 31,2 Kgr
Two year warranty
Price without VAT.
-
Airx wings (set)
145.00 €
125.00 € Excluding VAT
155.00 € Includes VATSet of three Airx wing spare parts
Price without VAT
Out of stock
-
Victron Inverter RS 48/6000 Smart Solar-MPPT
1,999.00 €
1,679.00 € Excluding VAT
2,081.96 € Includes VATVictron Inverter RS 48/6000 Smart Solar has MPPT 450VDC
Victron Inverter RS 48/6000 Smart Solar: The new stage of victron is a combination of a powerful 48VDC converter, 6kVA 230VAC and a high voltage solar charger, 80-450VDC, 4kW MPPT. Thanks to the modern design and high frequency technology, the inverter weighs only 11 kg and has excellent performance, low standby power and very quiet operation.
Available on backorder
-
Victron Energy Phoenix 12/250 -15 IEC Photovoltaic Inverter
108.00 €
87.00 € Excluding VAT
107.88 € Includes VATVictron Energy Phoenix 12/250
Victron Energy single-phase inverter 250W with pure sine output. It converts direct current (DC) 12V to alternating current (AC) of one phase and allows the powering of electrical and electronic devices from batteries and vehicles. All appliances powered by a pure sine wave inverter will operate to their full specifications.
Available on backorder
-
24V Autonomous PV System 2v 740AH -3000VA- MPPT 13kwh
3,850.00 €
3,334.00 € Excluding VAT
4,134.16 € Includes VAT24V Autonomous PV System 2v 740AH -3000VA- MPPT 13kwh
In stock
