Autonomous photovoltaic system for refrigerator 12V / 65watt - 75 watts
Autonomous photovoltaic kit / package for small refrigerator 65-75 watt / 12V or 220V by adding inverter
10A PWM charge regulator LS1024
11.50 € Excluding VAT
14.26 € Includes VAT
10A, programmable charge regulator with night mode.
Technical data - programming
| QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
| This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
| 4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
| 3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
| LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
| 1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Price without VAT
Out of stock
... people are viewing this right now
The 10A, programmable charge controller with night mode in black or white. It has a PWM microprocessor for more efficient and smoother charging. Also programmable for Night mode. It has a light sensor and a timer. It includes connectors for devices that are programmed to operate at night while at the same time they are switched off according to the respective programming.
Technical data - programming
| QUICK START INSTRUCTIONS | |||||||||||||||||||||||||||||||||||
| This section provides a brief overview of how to get started using the controller. However, please review the entire manual to ensure best performance and years of trouble-free service. 1. Mount the controller on a vertical surface. Allow space above and below the controller for air flow. 2. Make sure the PV and load currents will not exceed the ratings of the controller being installed. 3. It is recommended that the connections be made in order from 1 to 6. (see the following picture) |
|||||||||||||||||||||||||||||||||||
| 4. Connect the BATTERY first. Use care that bare wires do not touch the metal case of the controller. 5. Connect the SOLAR (PV array) next. The green LED indicator will light if sunlight is present. 6. Connect the LIGHT last. If the red LED indicator lights, the battery capacity is low and should be charged before completing the system installation 7. Press the BUTTON as 6 or 7 to verify the system connection. |
|||||||||||||||||||||||||||||||||||
| 3. Connect the consumer to the charge regulator - plus and minus Please observe that the automatic adjustment to 12V / 24V systems does not function properly, if this sequence order is not followed. An improper sequence order can damage the battery! | |||||||||||||||||||||||||||||||||||
| LIGHTING CONTROL OPTIONS | |||||||||||||||||||||||||||||||||||
| 1. Press the power switch for 5 seconds, and select the desired LIGHTING CONTROL option. The LED is on, which confirms you have selected the right one. 2. The controller requires 10 minutes of continuous transition values before it starts to work. These constraints avoid false transitions due to lightning or dark storm clouds. 3. 10 minutes off before the controller starts to work. 4. A brief description follows below: |
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Price without VAT
| Weight | 1 kg |
|---|---|
| Brand |
you may also like...
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
51.00 €
43.00 € Excluding VAT
53.32 € Includes VAT
43.00 € Excluding VAT
53.32 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-20A - PWM Charging Regulator (12 / 24V) 20A for Photovoltaics
The BlueSolar PWM-Pro series with default operating settings is one of the most advantageous and reliable solutions on the market. The charge regulator BlueSolar PWM-Pro 12 / 24V-20A has three battery charging stages (Bulk, absortion, float) which maximizes the battery life and the smooth operation of your photovoltaic system. It also has protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels or the battery. It can also be programmed with the help of the integrated BlueSolar Pro remote control panel easily, quickly and correctly.
Programmable with night mode
- The BlueSolar PWM-Pro 12 / 24V-20A charge controller is ready to use with its default settings. It is also fully programmable with the help of the BlueSolar Pro Remote Panel
- Three stages of battery charging (programmed with the help of BlueSolar Pro Remote Panel)
- Battery status check function (Remote Panel required)
- Night mode (Remote Panel required)
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
- Optional external temperature sensor.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 20A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 20A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
LS2024EU 20A PWM-USB Charging regulator
28.00 €
14.50 € Excluding VAT
17.98 € Includes VAT
14.50 € Excluding VAT
17.98 € Includes VAT
LS2024EU 20A PWM charge controller with USB
Ο charge regulator LS2024EU 20A with USB output provides efficient charging by applying the new PWM technology, increasing the battery life and improving the performance of the photovoltaic panels of a system; Load output · Provides battery temperature compensation ensuring proper charging and discharging of parameters automatically.
Features Electronic protection: · Load overload protection · Short circuit protection · Over-discharge battery protection · Reverse battery polarity protection
Price without VAT
Out of stock
Victron BlueSolar PWM Light 48V / 30A - PWM 30A Charging Regulator for Photovoltaics
66.00 €
56.00 € Excluding VAT
69.44 € Includes VAT
56.00 € Excluding VAT
69.44 € Includes VAT
Victron BlueSolar PWM Light 48V-30A - PWM 30A Charging Regulator for Photovoltaics
The charging regulator Victron Victron Bluesolar PWM Light 48V-30A, has an internal temperature sensor and consists of an advanced system of three stages of battery charging (Bulk, absortion, float) that ensures the correct charging process of your battery is charged resulting in maximizing life her! It is a very reliable charge regulator with protection against short circuits and overvoltages as well as from reverse polarity phenomena of solar panels and / or the battery. The charge regulator Victron Victron Bluesolar PWM Light 48V-30A is suitable for photovoltaic systems, for charging the batteries with current up to 30A.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 48V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 30A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 100V |
| Max. Current Solar Module | 30A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Victron BlueSolar PWM PRO 10A
29.00 €
25.00 € Excluding VAT
31.00 € Includes VAT
25.00 € Excluding VAT
31.00 € Includes VAT
Victron BlueSolar PWM PRO 12 / 24V-10A - PWM Charging Regulator (12 / 24V) 10A for Photovoltaics
The BlueSolar PWM-Pro series is ready to use with the default settings. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery. These unique features make the BlueSolar PWM -Pro 12 / 24V-10A controller one of the most valuable controllers on the market. It can also be programmed easily, quickly and correctly with the help of the integrated BlueSolar Pro remote control panel.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V, 24V |
| Connectivity | Fananzeige Pro Fanbedienpanel, PWM-Pro with USB Interface Cable, Temperature Turbines |
| Permitted Humidity | max. 98% (not condensing) |
| IP Protection | IP30 |
| Charging Current max. | 10A |
| Standby Self-Consumption | 10mA |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 10A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Price without VAT
Available on backorder
Related products
CHARGING REGULATOR PHOCOS CX-4048 24 / 48V - 40A
139.00 €
113.00 € Excluding VAT
140.12 € Includes VAT
113.00 € Excluding VAT
140.12 € Includes VAT
Use in small autonomous and large photovoltaic installations. Main Features The charge regulator for photovoltaics CX40-48 has an LCD graphic display, which displays the charge status of the battery and the charge.
Price without VAT
In stock
DIGITAL INSTRUMENT FOR CXN 12V / 24V SERIES
35.22 €
26.00 € Excluding VAT
32.24 € Includes VAT
26.00 € Excluding VAT
32.24 € Includes VAT
DIGITAL INSTRUMENT FOR CXN 12V / 24V SERIES
Price without VAT
Out of stock
CHARGING REGULATOR PHOCOS CX-2048 24 / 48V - 20A
119.16 €
99.00 € Excluding VAT
122.76 € Includes VAT
99.00 € Excluding VAT
122.76 € Includes VAT
Use in small autonomous and large photovoltaic installations. The charge regulator for photovoltaics CX20-48 has an LCD graphic display, which displays the charge status of the battery and the charge, as well as the operation of the photovoltaics.
Price without VAT
In stock
Victron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics
19.00 €
16.00 € Excluding VAT
19.84 € Includes VAT
16.00 € Excluding VAT
19.84 € Includes VAT
Victron BlueSolar PWM-Light 12 / 24V-5A - PWM 5A Charging Regulator for Photovoltaics
Victron charge regulator with internal temperature sensor. It has three stages of battery charging (Bulk, absortion, float), protection against short circuit and over-voltages as well as from reverse polarity of the solar panels and / or the battery.
Programmable with night mode
- The BlueSolar PWM Light 12 / 24V-5A charge controller is ready to use with its default settings.
- Three stages of battery charging
- Battery status check function
- Night operation
- Load output with battery discharge protection, overload protection and short circuit.
- Reverse polarity protection of photovoltaic - battery.
Specifications
| Manufacturer | VictronEnergy |
|---|---|
| Charge Controller Type | PWM |
| System Voltage | 12V |
| Permitted Humidity | max. 95% RF (not condensing) |
| IP Protection | IP20 |
| Charging Current max. | 5A |
| Standby Self-Consumption | 10mA |
| Battery Voltage | 12V, 24V |
| Load Current max. | 5A |
| Max. Voltage Solar Module | 28V / 55V |
| Max. Current Solar Module | 5A |
| Number of Charging Outputs | 1 |
| Ambient Temperature | -20 ° C - + 50 ° C |
Available on backorder
Charging regulator VS6024BN 60A PWM-USB
129.00 €
119.00 € Excluding VAT
147.56 € Includes VAT
119.00 € Excluding VAT
147.56 € Includes VAT
Charging regulator VS6024BN 60A PWM with programmable screen
Suitable for charging the batteries with current up to 60A (ie with photovoltaic panels with a total power of 1.500Wp at 24V or 750Wp at 12V). It also has a socket for connecting devices, with their automatic shutdown before the battery is completely discharged, thus protecting it from premature wear. The regulator stops charging automatically when the batteries charge.
It has digital screen with indications of the charging status and voltage of the batteries or the output of the panels in Ampere and the possibility of adjusting the charging voltage of the batteries. Shows the battery charge rate, what is the operating voltage while fully programmed.
Price without VAT
Out of stock
CHARGING REGULATOR PHOCOS CX-40 12 / 24V - 40A
97.30 €
67.00 € Excluding VAT
83.08 € Includes VAT
67.00 € Excluding VAT
83.08 € Includes VAT
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 40A / 40A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
Out of stock
WATERPROOF CHARGING REGULATOR LS1024BP
57.00 €
32.00 € Excluding VAT
39.68 € Includes VAT
32.00 € Excluding VAT
39.68 € Includes VAT
Charging regulator waterproof / waterproof LS1024BP 10A PWM with aluminum body IP67. Suitable for outdoor use or operation facing the sea. Ideal for outdoor garden lights, light columns, yachts, caravans, caravans
Price without VAT
In stock
Charging regulator LS0512EU 5A PWM
19.00 €
8.50 € Excluding VAT
10.54 € Includes VAT
8.50 € Excluding VAT
10.54 € Includes VAT
Charging regulator LS0512EU 5A PWM with USB output
Specifications:
Ο charge regulator LS0512EU 5A provides efficient charging by applying the new PWM technology, increasing battery life and improving the performance of a system's photovoltaic panels; of the load output · Provides compensation of the temperature of the batteries ensuring proper charging and discharging of the parameters automatically
It has Electronic protection:
· Load overload protection · Short circuit protection · Battery protection against overcharging · Reverse battery polarity protection
Price without VAT
Out of stock
CHARGING REGULATOR PHOCOS CX-10 12V-24V-10A
37.00 €
29.00 € Excluding VAT
35.96 € Includes VAT
29.00 € Excluding VAT
35.96 € Includes VAT
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 10A / 10A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
In stock
CHARGING REGULATOR PHOCOS CX-20 12 / 24V - 20A
45.00 €
37.00 € Excluding VAT
45.88 € Includes VAT
37.00 € Excluding VAT
45.88 € Includes VAT
System voltage: 12V / 24V automatic selection. Maximum charging / load current: 20A / 20A Same consumption: operating temperature: -20 ~ + 50⁰C Dimensions: 92 x 93 x 38 mm Weight: 168gr Protection: IP22
Price without VAT
In stock
Cotek CX1280 Battery Charger - 12V - 80A - 230VAC
679.00 €
499.00 € Excluding VAT
618.76 € Includes VAT
499.00 € Excluding VAT
618.76 € Includes VAT
Cotek CX1280 Battery Charger - 12V - 80A - 230VAC
Price without VAT
In stock
Victron BlueSolar MPPT 75/10 - Charging Regulator 10A-MPPT for Photovoltaic-Wind Turbines
48.00 €
41.00 € Excluding VAT
50.84 € Includes VAT
41.00 € Excluding VAT
50.84 € Includes VAT
Victron BlueSolar MPPT 75/10 - MPPT Charging Regulator 10A for Photovoltaic-Wind Turbines
Victron battery chargers, thanks to fast technology maximum power point (MPPT) from photovoltaic panels, even under shading conditions, promise the fastest possible charging of the batteries of the autonomous photovoltaic system, based on the safety of the equipment and ensuring the required charging voltage of the batteries for their proper and long-term proper operation.
They have extremely fast find the maximum power efficiency point (MPPT). Especially in the case of cloudy skies, or when the light intensity is constantly changing, an ultra-fast MPPT controller will improve energy efficiency by up to 30% compared to PWM charge controllers of up to 10% compared to slower MPPT controllers.
Specifications
| Type | MPPT |
| Power (W) | 145 (12V) / 290 (24V) |
| Manufacturer | VictronEnergy |
| Input voltage (V) | 75 |
| Output Voltage (V) | 12/24 |
| IP Protection | IP43 (electronic components), IP22 (connection area) |
| Weight (kg) | 0.5 |
| Warranty (years) | 5 years |
| Other Information | Color Blue (RAL 5012), 6 mm² / AWG10 (Power terminals), VE.Direct |
Available on backorder
Most viewed products
-
10kW PPC Photovoltaic ECO 545 Solar on roofs
6,800.00 €
5,300.00 € Excluding VAT
6,572.00 € Includes VAT10 Kwatt photovoltaic on roofs with interconnected to PPC photovoltaic system with installation
Photovoltaic Eco 545
See all offers here
Available on backorder
-
5kW PPC Photovoltaic ECO Solar 410-420 WATT with possibility for Installation
7,280.00 €
4,800.00 € Excluding VAT
5,952.00 € Includes VAT410-WATT-420-WATT-
About answers to the most common questions about photovoltaics in homes. See the special offers of photovoltaics for 2022
5kw with photovoltaics on roofs with photovoltaics and installation Additional offers here
Available on backorder
-
Net metering 5kW photovoltaic package with 450 watt panels
3,650.00 €
2,750.00 € Excluding VAT
3,410.00 € Includes VATNet metering 5kW photovoltaic package offer
11 Photovoltaic panels 450 watts
Network inverter Renac NA 5000 DS (7500WATT max) 10 Year Warranty
Tile roof supports for 11 PV panels.
In stock
-
Net metering 10kW energy offset with PPC
6,700.00 €
5,590.00 € Excluding VAT
6,931.60 € Includes VATNet metering 10kW for energy offset and savings with PPC with production up to 16.600kWh per year
Available on backorder
-
Autonomous photovoltaic package 1.2kWh/24 hours-12v
599.00 €
465.00 € Excluding VAT
576.60 € Includes VATAvailable on backorder
-
Autonomous PV for a holiday home 4,5kWh with air conditioner
2,600.00 €
1,780.00 € Excluding VAT
2,207.20 € Includes VATAutonomous photovoltaic for a 4,5kWh cottage with air conditioning
Available on backorder
-
Net-metering 10kw with 10kwh lithium battery for storage with 460 WATT PV and Panels Complete package
17,800.00 €
14,100.00 € Excluding VAT
17,484.00 € Includes VATNet-metering 10kw with 10kwh lithium battery for storage with PV 460 WATT and Panels Complete AC/DC package for energy compensation (10 year inverter warranty)
Net metering 10kw with 10kwh lithium battery ( They produce in the summer in southern areas 40-50kw daily and about half or 1/3 in Winter) 12.000 - 16.000 kw averaged per year in Southern regions.
Price without VAT
Available on backorder
-
Photovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
329.00 €
159.00 € Excluding VAT
197.16 € Includes VATPhotovoltaic Luxor 540 watt mono half cell ecoline LX-540M / 182-144-Germany
Suitable for net-metering, home photovoltaics, parks and photovoltaic stations
Minimum purchase quantity 9 pieces
Available on backorder
-
5 kwh- 7kwh/24v/220AC – 24V Premium Photovoltaic System
3,750.00 €
2,950.00 € Excluding VAT
3,658.00 € Includes VAT4 pcs. Φ / Β panel Solar Energy SE 270 / 270-275 watt Poly/ European. They have positive Photovoltaic system Premium 24V tolerance and power in watts. That is, they always deliver more watts than their rated power, high efficiency installed power 1080 watts up to + 5% more efficiency. Available with 12 years warranty factory equipment and 25 years warranty 80% yield.
1 pc. pure sine wave inverter Phoenix 24/1600 3200 watt power supply high reliability. Suitable for operation of all devices of corresponding power. Provides energy savings of up to 25% on self-consumption due to stabilized sine. Warranty 60 months (5 years)
4 pcs. Batteries S. Energy ECOAGM 220 / 250AH C100 type VRLA/ AGM corresponding specifications to GEL batteries. (deep closed type discharge lasting 10-12 years of life). Total 828AH / 12V
Possibility to add 2V High-strength and longer-lasting batteries in extreme uses at a small additional cost.
1 pc. Charging regulator Phocos CXN 40 (Digital programmable) (2 years warranty)
Ability to add MPPT controller with datalogger to increase efficiency up to 25% at a small additional cost.
Available on backorder
-
5kw Mitsubishi Electric
7,280.00 €
5,200.00 € Excluding VAT
6,448.00 € Includes VAT5kw with photovoltaic Mitsubishi PV (250W) 250 watts polycrystalline silicon
It produces an average of 6500kw per year (for areas of Attica and further south) while covering an area of 35-40 square meters on a pergola or 60-80 square meters on a terrace. It saves 800-1000 euros per year and absorbs the installation cost in 5.5 - 6.5 years.
Price without VAT
Out of stock
Recently viewed products
-
4 PzB 260 2V Deep discharge SUNLIGHT battery
73.00 €
69.10 € Excluding VAT
85.68 € Includes VAT4 PzB 260 2V SUNLIGHT deep discharge battery. Traction battery - traction, open type with liquids and with 2500 cycles at 50% COMING, with excellent performance in applications that require deep discharge. Suitable for electric lifting machines - clark - clark, service on boats, autonomous photovoltaic systems and generally electric applications. SUNLIGHT traction batteries optimize your business, as they provide reliable daily power to your industrial or commercial vehicles.
Out of stock
-
Huawei SUN2000 5KTL M1-5k W Three Phase Photovoltaic Inverter
1,356.98 €
1,175.00 € Excluding VAT
1,457.00 € Includes VATHuawei SUN2000 5KTL M1-5k W Three Phase Photovoltaic Inverter. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
-
Huawei SUN2000 100KTL M1-100k W Three Phase Photovoltaic Inverter
6,700.00 €
5,349.19 € Excluding VAT
6,633.00 € Includes VATHuawei SUN2000 100KTL M1-100k W Three Phase Photovoltaic Inverter. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
-
100Ah-Lithium Battery EPEVER EP-LFP24100 2,56KWH 24V LiFePO4 25,6V with BMS and display
859.00 €
625.00 € Excluding VAT
775.00 € Includes VAT100Ah-Lithium Battery EPEVER EP-LFP24100 2,56KWH 24V LiFePO4 25,6V with BMS and display
Available on backorder
-
European Autonomous photovoltaic 17kwh / 24v + 2V 740AH batteries and Victron Multiplus 5000VA for permanent homes
6,800.00 €
5,650.00 € Excluding VAT
7,006.00 € Includes VATEuropean Autonomous photovoltaic 17kwh/24v + 2V 740AH batteries and Victron Multiplus 5000VA for permanent residences (per 24 hours in the summer months) – Indicative system for small permanent residences
Available on backorder
-
Kaco KA BLUEPLANET 105 TL3 network inverter for photovoltaics
6,341.00 €
5,062.57 € Excluding VAT
6,277.59 € Includes VATKaco KA BLUEPLANET 105 mains inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
-
Autonomous PV with 12v batteries 280AH + Inverter charger 3000VA
2,600.00 €
2,190.00 € Excluding VAT
2,715.60 € Includes VATAvailable on backorder
-
BSL-SE16C-40M
79.00 €
45.00 € Excluding VAT
55.80 € Includes VAT40Wp / 12v Monocrystalline silicon. It has an aluminum frame.
Price without VAT
Out of stock
-
Fronius FR SYMO 7.0-3-M network inverter for photovoltaics
2,240.00 €
1,755.00 € Excluding VAT
2,176.20 € Includes VATFronius FR SYMO 7.0-3-M network inverter for photovoltaics. Suitable inverter for net metering, photovoltaic on roofs, home and professional photovoltaic systems.
Available on backorder
-
Pure sine wave inverter 3000Watt / 3750VA 12V-24v
659.00 €
629.00 € Excluding VAT
779.96 € Includes VAT3000Watt (3800VA) / 24V Solar Energy TY 3000-S-24V-6000WATT PEAK high performance.
Two year warranty for the European Delegation.
Energy saving in relation to self-consumption of powered devices up to 25%
Input voltage: 21.5V- 30V DC.
Output voltage 230V AC 50Hz / 3000W pure sine.
2 year European warranty, pay attention to cheap imitations, 20% longer power resistance for 10 minutes
Price without VAT
In stock
